This page in NSP assigns the Brake Light Output used by the brake lights function. You'll need it when the ECU, rather than a plain pedal switch, switches the lamps, for example to use brake light pulsing under hard braking.
- Edit: pick an available output, or move the function to a different one.
- Clear: remove the current assignment.
What to check
- Make sure the output you pick can handle the current of all your brake lamps. If it can't, switch them through a relay or a PDM channel.
- The brake pedal switch must be set up under Sensors first, or the function has nothing to act on.
- Test with the pedal before driving and confirm every lamp lights.
Need this diagram? Ask us and we'll send it over with advice for your build.
