Suits:Nexus or Elite Series ECU's
Includes:Nexus PD16 Power Distribution Module (PDM), 120A Surlok main power connection, AMP 34 pin and DTP-4 Connectors and pins, USB cable and Programming Software. Haltech CAN Keypad 2 x 4 - CAN Keypad 8 inputs, Amber Backlight. Haltech Backpack, Lanyard, Fabric Keytag, Koozie and Laptop Sleeve.
The Haltech CAN Keypad is a plug and play control solution for your Haltech system. With soft touch, ergonomically designed buttons, the Haltech CAN Keypad is easy to use and simple to configure.
Plug and Pins Only AMP 34 Pin 4 Row 3 Key Superseal
Plug and pins only - Male Deutsch DTP-06-4S - Black connector (25Amp)
Haltech Lanyard - Yellow with printed logo
Haltech Fabric Keytag
Fashionable and practical, the Haltech Tuner-Spec Laptop sleeve features a non-slip, shark skin backing not only protecting your laptop but also providing a protective base to rest your laptop on while tuning your car!
PAGE UP FOR POWER!!!
This is not your ordinary backpack. It has been designed to withstand the rigours of garage life with some race track action thrown in. Made from heavy-duty material and reinforced at the bottom, this backpack almost indestructible! Okay, so it's tough and practical but let's face it - a backpack needs to look good as well so we've included a whole bunch of custom touches. Of course, as well as being tough a proper â€œTuner-Specâ€ backpack needs to be practical too so we haven't skipped on features either.
- Dedicated laptop compartment with extra padding
- Generous main compartment with a tablet sleeve
- Separate front compartment for your wallet, keys, computer accessories
- Easily accessible top zip-up pocket for sunglasses.
- Heavy-duty handle (we know you'll stuff a lot of heavy gear inside!)
- Padded back panel and padded shoulder straps
- Phone pocket on a shoulder strap
- Generous side pockets PLUS water bottle holders on each side
- Haltech embroidery on the front pocket
- Custom zip pulls on every zipper
- Custom Haltech panels on front pockets
- Speed Vents on the front panel - for more speed!
- Dimmable LED indicators
- Sealed to IP67
- Vibration and impact resistant
- Operating Temperature -40C to +85C
- Long Life: 1,000,000 cycles per key
- 10 x High Side Outputs
- 2 x Half Bridge Outputs
- 4 x 25A High Current Outputs
- 8 x Inputs + Dedicated Ignition Switch Input
- Power for Ignition Switch
- Integrated into Haltech CAN Bus Network
- 5V Sensor Supply / Sensor Ground
- 120A SurLok Connector