Elite 750 Nissan Patrol Y60 & Y61 (TB45) Plug 'n' Play Adaptor Harness (HT-140661)

Put a Haltech Elite 750 in a Y60/Y61 Patrol without cutting a single factory wire.

The Haltech Elite 750 Nissan Patrol Y60 & Y61 (TB45) Plug 'n' Play Adaptor Harness sits between the factory engine harness and a Haltech Elite 750 ECU. One side carries the factory ECU connectors, the other plugs straight into the Elite, so the factory loom stays untouched and the swap is fully reversible. A typical install is a few hours, not a weekend of pinouts and splices. It suits the Y60 and Y61 Patrol / Safari with the TB45E only, automatic or manual (the ECU does not control or re-program the automatic's shifting).

Need the ECU as well? The same application is also available as: Elite 750 ECU kit (HT-150661), Elite 2500 ECU kit (HT-151398).

What You'll Feel

• A turbo TB45 with fuelling and timing that match the boost, not the factory guess
• Spare ignition outputs ready for a distributor-to-coil-on-plug conversion when you want it
• Factory connectors that click home instead of a loom you have to rebuild
• A stock harness you can return to at any time

Features

• Plug 'n' play adaptor with the Nissan Patrol Y60 & Y61 (TB45) factory ECU connector layout
• Suits Haltech Elite 750 ECUs
• No cutting or splicing of the factory harness, fully reversible
• Includes an M14 x 1.5 air temp sensor with plug and pins, so the ECU sees real intake temperature from day one
• Auxiliary I/O 16-pin Tyco plug and pins for extra sensors and outputs (wideband, fuel and oil pressure, flex fuel)
• Haltech quick start guide walks through the fit
• Backed by the Haltech limited warranty

The Details

Part number HT-140661. Plug 'n' Play replacement of the factory ECU for Nissan Patrol/Safari Y60 and Y61 with automatic or manual transmissions. (No shift re-programming/control etc) TB45E Only. Unsure whether your car matches? Send us the VIN or a photo of the factory ECU plug before ordering and we will confirm.

• Spare ignition outputs can be used (via custom wiring) to convert from distributor to direct fire ignition system. (6 individual coils)

Kit Includes

• 1x Injection molded plastic plug 'n' play adaptor harness
• 1x M14 x 1.5 air temp sensor with matching plug and pins
• 1x Auxiliary I/O 16 Pin Tyco plug and pins

Applications

• Nissan Patrol Y60 & Y61 (TB45), TB45E 4.5L
• Requires a Haltech Elite 750 ECU (sold separately)

Tuned By Shawn is a Platinum Haltech Dealer with in-house wiring and remote tuning. If this is part of a larger build, ask and we will spec the full parts list.