What it's for
The quick start guide for the Elite 1000 and 2000 is a one-page reference, and Side B is presented as a graphic rather than written instructions. It's a quick visual companion for the first install and power-up, not a replacement for the full manual or the wiring diagram.
When you need it
- While getting oriented on the ECU and its connectors before you start wiring.
- When confirming power, ground and sensor supply wiring before first power-up.
- When fault finding a sensor or output that isn't responding.
What to check
Don't treat a quick start sheet as your pinout. Match every wire to the correct connector and pin for your exact ECU, since the 1000 and 2000 use different main connectors. Confirm grounds and 12V feeds before anything else, and check each sensor reads sensibly in ESP before cranking. Full pin details are in the Elite 1000 26-pin and Elite 2000 34-pin connector pages, and Side A covers the other half of the sheet.
Need this diagram? Ask us and we'll send it over with advice for your build.
