Rywire OBD2 Harness to Nippon Denso/ID2000 Injector Plug Adapters, Set of 4 - Honda (Inj-adapter-2-ID2)

Rywire Inj-adapter-2-ID2 is a plug-and-play injector jumper that connects Nippon Denso style or Injector Dynamics ID2000 injectors to a OBD2 harness injector clip. Use it when your injectors and harness have different plugs, without cutting the harness or re-pinning connectors.

Why This Injector Plug Adapter for Your Honda Swap

The Rywire Inj-adapter-2-ID2 is an injector plug adapter set that connects Nippon Denso style or Injector Dynamics ID2000 injectors to an OBD2 swap harness.

• Versus cutting and splicing the factory plug: This ID2000/Denso injector adapter set plugs in between the harness clip and the injector, so the factory clips stay intact with no cutting, splicing or re-pinning.
• Versus hunting down injectors with your harness plug: This ID2000/Denso injector adapter set lets you run ID2000 or Nippon Denso style injectors on an OBD2 harness instead of choosing injectors by connector.
• Set of 4: This ID2000/Denso injector adapter set includes 4 adapters, one per injector on a 4-cylinder; the adapter only changes the plug; new injectors still need their injector data updated in your tune.

Best for: An OBD2 harness running Injector Dynamics ID2000 or Nippon Denso style injectors.

Vehicle Fitment

• Harness side: OBD2 harness injector clip
• Injector side: Nippon Denso style or Injector Dynamics ID2000 injectors

Features

• Plugs in between the harness clip and the injector
• No cutting, splicing or re-pinning
• Sold as a set of 4

What's Included

• 4 injector plug adapters

Frequently Asked Questions

How many come in an order?

4 adapters, one per injector for a 4-cylinder.

Do I need to change my tune?

The adapter only changes the plug. If you are also changing injectors, the injector data in your tune has to be updated for the new injectors.

How does it install?

It plugs into your harness injector clip and the injector plugs into the adapter. No cutting or pinning. Email service@tunedbyshawn.com with your engine, chassis and ECU before ordering if you are unsure which configuration you need.

Can I run ID2000 injectors on an OBD2 Honda harness without re-pinning?

Yes. The Rywire OBD2 to Nippon Denso/ID2000 injector adapters plug between the harness clip and the injector, 4 per set. The tune still needs the new injector data.

For off-road and competition use only. Not legal for use on pollution-controlled motor vehicles.