Rywire OBD2 8-Pin to OBD2 10-Pin Distributor Adapter - 1999-2000 Civic SOHC, CR-V, Prelude (Dis-2-2-8pin-10pin)

Rywire Dis-2-2-8pin-10pin lets a car with the OBD2 8-position distributor plug run an OBD2 10-position distributor. Rywire built it for the 1999-2000 Civic (SOHC), CR-V and Prelude chassis that use the 8-pin plug.

Why This Distributor Adapter for Your Honda Swap

The Rywire Dis-2-2-8pin-10pin is a distributor adapter that lets a Honda with the OBD2 8-position distributor plug run an OBD2 10-position distributor.

• Versus cutting and splicing the factory plug: This 8-pin to 10-pin distributor adapter plugs in between the factory distributor plug and the distributor, so the chassis harness stays uncut and the change is reversible.
• Versus hunting down a matching-era distributor: This 8-pin to 10-pin distributor adapter lets you run the 10-position distributor you have instead of finding an 8-pin distributor to match the chassis.
• Check your plug: Rywire does not list CR-V or Prelude years for this 8-pin to 10-pin distributor adapter; confirm the car has the 8-position distributor plug before ordering.

Best for: A 1999-2000 Civic SOHC, or a CR-V or Prelude with the 8-position plug, running an OBD2 10-position distributor.

Engine Swap Fitment

• 1999-2000 Honda Civic, SOHC models
• Honda CR-V with the 8-pin distributor plug
• Honda Prelude with the 8-pin distributor plug
• Distributor side: OBD2 10-position distributor

Features

• Plug-in adapter between the 8-position chassis plug and the 10-position distributor
• No cutting or splicing

What's Included

• One OBD2 8-pin to OBD2 10-pin distributor adapter harness

Frequently Asked Questions

Which CR-V and Prelude years?

Rywire does not list years for those two; it fits the models that came with the 8-position distributor plug. Check your plug before ordering.

Do I have to cut my harness?

No. The adapter plugs in between the factory distributor plug and the distributor, so the chassis harness stays intact. Email service@tunedbyshawn.com with your engine, chassis and ECU before ordering if you are unsure which configuration you need.

Can a 10-pin OBD2 distributor run in a car with the 8-pin plug?

Yes. The Rywire OBD2 8-pin to 10-pin distributor adapter plugs in between the 8-position chassis plug and the 10-position distributor with no cutting or splicing.

For off-road and competition use only. Not legal for use on pollution-controlled motor vehicles.