Rywire OBD0 to OBD2a 10-Pin Distributor Adapter - 1988-1991 Honda MPFI Chassis (dis-0-2-10-pin)

Rywire dis-0-2-10-pin lets a 1988-1991 OBD0 MPFI Honda chassis plug into an OBD2 10-position distributor, as found on 1996+ B-series and 1996-1998 D-series engines. It is a common piece of an OBD0 to OBD2 B-series or D-series swap.

Why This Distributor Adapter for Your Honda Swap

The Rywire dis-0-2-10-pin is a distributor adapter that connects a 1988-1991 OBD0 MPFI Honda to an OBD2 10-position distributor, a common piece of an OBD0 to OBD2 B or D-series swap.

• Versus cutting and splicing the factory plug: This OBD0 to 10-pin distributor adapter plugs in between the factory distributor plug and the distributor, so the chassis harness stays uncut and the change is reversible.
• Versus hunting down a matching-era distributor: This OBD0 to 10-pin distributor adapter lets you run the OBD2 10-position distributor that came with your engine instead of finding an OBD0 distributor.
• Pick the right pin count: This OBD0 to 10-pin distributor adapter suits 1996+ B-series and 1996-1998 D-series distributors; 1999+ D-series distributors use the 8-pin plug.

Best for: A 1988-1991 OBD0 MPFI Honda chassis running a 1996+ B-series or 1996-1998 D-series OBD2 10-position distributor.

Engine Swap Fitment

• 1988-1991 OBD0 MPFI Honda chassis
• OBD2 10-position distributor: 1996+ B-series, 1996-1998 D-series
• For a 1999+ D-series 8-pin distributor, use the OBD0 to OBD2 8-Pin Distributor Adapter (Dis-0-2-8-pin)

Features

• Plug-and-play adapter between the chassis distributor plug and the distributor
• No cutting or splicing of the factory harness
• Built by Rywire

What's Included

• Rywire OBD0 to OBD2a 10-pin distributor adapter

Frequently Asked Questions

Do I need the 8-pin or 10-pin version?

The OBD2 10-position distributor plug is on 1996+ B-series and 1996-1998 D-series engines. 1999+ D-series distributors use the 8-pin plug.

Will it work on a non-MPFI chassis?

It is made for the 1988-1991 OBD0 MPFI chassis. Email service@tunedbyshawn.com with your engine, chassis and ECU before ordering if you are unsure which configuration you need.

Do I need the 8-pin or 10-pin OBD0 to OBD2 distributor adapter?

1996+ B-series and 1996-1998 D-series distributors use the 10-position plug. 1999+ D-series distributors use the 8-pin plug and need the 8-pin adapter.

For off-road and competition use only. Not legal for use on pollution-controlled motor vehicles.