Rywire K20 Master Engine Connector Kit - K20 Swap Harness Build (k20-Connector-Kit)

Rywire k20-Connector-Kit is a master connector kit with every engine-side plug a Honda K20 needs, for building a K20 swap engine harness. This connector kit is meant for building your own engine harness from scratch or re-terminating a tucked harness. Every connector comes with its housing, terminals, seals and terminal locks.

What's Included

• 4 coil connectors
• 4 injector connectors
• 1 VTEC solenoid connector
• 1 VTC solenoid connector
• 1 alternator connector
• 1 reverse lockout solenoid connector
• 1 reverse light switch connector
• 1 idle air control connector
• 1 mainshaft speed sensor (VSS) connector
• 1 knock sensor connector
• 1 intake air temperature connector
• 1 coolant temperature connector
• 1 intake cam sensor connector
• 1 exhaust cam sensor connector
• 1 crank sensor connector
• 1 throttle position connector
• 1 manifold pressure connector

Not Included (Order Separately If Needed)

• 2005+ countershaft speed sensor connector
• Flex fuel (ethanol content) sensor connector

Fitment

• Honda K20 engine plugs (K20 coil, injector, knock and crank sensor connectors)
• Building or repairing a K20 swap engine harness
• For K24 knock and crank sensor plugs, see the K24 Master Engine Connector Kit (K24-Connector-Kit)

Wire is not included. Crimp tooling is required.