Rywire K-Series to B-Series TPS/MAP Adapter Harness - K-Swap (k-b-tps-map-adap)

Rywire k-b-tps-map-adap is a short (about 5 in) adapter harness that plugs a factory K-series engine harness into a B-series throttle position sensor (TPS) or manifold absolute pressure (MAP) sensor. Choose the TPS or MAP version below.

Why This K-Series to B-Series TPS/MAP Adapter for Your K-Swap

The Rywire k-b-tps-map-adap is a K-swap sensor adapter, about 5 in long, that plugs a factory K-series engine harness into a B-series TPS or MAP sensor.

• Versus cutting and splicing the factory plug: This TPS/MAP adapter plugs in between the K-series harness plug and the B-series sensor, so the harness stays uncut and the change can be undone.
• Versus hunting down a matching K-series sensor: This TPS/MAP adapter lets you keep the B-series TPS or MAP sensor your setup already uses instead of changing sensors to match the harness.
• One sensor per adapter: This TPS/MAP adapter comes in a TPS version and a MAP version; order one of each to convert both sensors.

Best for: A factory Honda K-series engine harness running a B-series TPS or MAP sensor.

Engine Swap Fitment

• Harness side: factory Honda K-series engine harness TPS or MAP plug
• Sensor side: Honda B-series TPS or MAP sensor

Features

• About 5 in long
• Plug-in, no cutting the K-series harness
• Available in TPS and MAP versions

Choosing Options

• Adapter Type: TPS adapts the throttle position sensor plug; MAP adapts the manifold pressure sensor plug. Order one of each if you need both.

What's Included

• One K-series to B-series adapter harness (TPS or MAP, as selected)

Frequently Asked Questions

Do I need one for TPS and one for MAP?

Yes, each adapter covers one sensor. Order the version for each sensor you are converting.

Does it work with a Rywire K-series harness?

It is made for the factory-style K-series harness plug. Email service@tunedbyshawn.com with your engine, chassis and ECU before ordering if you are unsure which configuration you need.

Should I cut my K-series harness plug or use an adapter for a B-series TPS or MAP sensor?

The Rywire K-series to B-series adapter plugs in between the harness plug and the sensor, so the K-series harness stays uncut. Each adapter covers one sensor, TPS or MAP.

For off-road and competition use only. Not legal for use on pollution-controlled motor vehicles.