Rywire F22 Master Engine Connector Kit - 2006-2007 S2000 F22C Harness Build (F22-Connector-Kit)

Rywire F22-Connector-Kit is the master engine connector kit for the 2006-2007 Honda S2000 F22C, for building or re-terminating an F22C engine harness. It covers the drive-by-wire throttle body and the later F22 cam, crank, MAP, IAT and coolant plugs. Extra terminals and seals are included. This connector kit is meant for building your own engine harness from scratch or re-terminating a tucked harness. Every connector comes with its housing, terminals, seals and terminal locks.

What's Included

• 4 coil connectors
• 4 injector connectors
• 1 VTEC solenoid connector
• 1 VTEC pressure switch connector
• 1 alternator connector
• 1 F22 camshaft sensor connector
• 1 reverse light switch connector
• 1 countershaft speed sensor connector
• 1 knock sensor connector
• 1 F22 intake air temperature connector
• 1 F22 coolant temperature connector
• 1 F22 crank sensor connector
• 1 F22 drive-by-wire throttle body connector
• 1 F22 manifold pressure connector
• 1 primary O2 connector
• Extra terminals and seals

Not Included (Order Separately If Needed)

• Engine computer plugs A, B and C
• Chassis blue connector
• Flex fuel (ethanol content) sensor connector

Fitment

• 2006-2007 Honda S2000 F22C only
• For a 2004-2005 F22C, order the F20 Master Engine Connector Kit (F20-Connector-Kit)
• Building or repairing an S2000 engine harness or F22C swap harness

Frequently Asked Questions

Which F22 kit do I need?

This kit is for the 2006-2007 S2000 F22C. Rywire specifies the F20 kit for the 2004-2005 F22C.

Wire is not included. Crimp tooling is required (a "W" style crimper for these terminals).