Radium Remote Mount Vented Female Dry Break 2.25in Universal 20-1204-V
Radium remote housing with 2.25in barb detail 20-1204-V

Vendor:Radium Engineering

Radium Remote Mount Vented Female Dry Break 2.25in | Universal (20-1204-V)

SKU: 20-1204-V

$275.45
Shipping calculated at checkout.
From Shawn: Not sure this product is right for your build? Email me at service@tunedbyshawn.com before you order. I answer these myself.

ECUs always ship FREE with Tuned By Shawn!

Manufacturer Limited Warranty

Product details

Description

Big cells drain a dump can fast, and a 1.5 inch hose becomes the bottleneck.

The Radium Engineering remote mount vented female dry break, 2.25in mounts to an external body panel such as a fender and receives the male dry break probe from a dump can, exiting into a 2.25 inch barbed outlet for high volume filler hose. The vented fuel cap includes roll-over protection if the car ends up inverted.

What You'll Feel

  • Fill rates limited by the can rather than the hose
  • Fast, spill-free coupling with the probe locking into the panel-mounted receiver
  • Roll-over protection built into the vented cap
  • Full fuel compatibility including methanol and E85

Features

  • 1.5in female dry break receptacle in an aluminum remote housing
  • 2.25in barbed outlet adapter
  • Vented fuel cap with roll-over protection
  • Flange outer diameter 4.75in, bolt circle 4.25in PCD, height 4.08in dry break to barb, requires a 77mm (3.03in) hole
  • Threaded mounting ring, gasket, and stainless steel hardware

The Details

The receiver itself is the same 1.5 inch dry break used across the range; only the outlet is larger. All three Radium remote fillers share housing, hole size, and flange pattern, differing only in outlet: 1.5in barb on the 20-1004-V, 75 degree 24AN elbow on the 20-1104-V, and 2.25in barb here. The outlet adapter is O-ring sealed and interchangeable with six screws, so hose size can change later using the 20-1007, 20-1008, or 20-1015 adapters. Mates to the 20-0996 or 20-0496 male probe. Add the 20-0604 dust cap to keep debris out of the receiver between fills.

Kit Includes

  • Remote mount housing and dry break receptacle
  • 2.25in barb adapter, threaded mounting ring, gasket, and stainless steel hardware
  • NOT included: male dry break probe, filler hose, and dust cap

Applications

  • Universal remote mounting to an external panel such as a fender
  • Connects to 2.25in ID filler hose

Important Notes

  • Requires a 77mm (3.03in) hole to be fabricated in the mounting surface