Radium Remote Mount Fill Neck - Straight - 1.5in Barb | Universal (20-0527)

The straight shot from fill point to tank, in machined aluminum.

The Radium Remote Mount Fill Neck, Straight, with 1.5" Barb anchors the remote fill: a straight machined fill neck mounting at the panel and presenting a 1.5" hose barb below, carrying fuel down to the cell or tank through clamped fill hose. The straight member of Radium's remote fill neck family, capped separately per the vent architecture.

What You'll Feel

• A clean panel-mounted fill point where the build needs it
• Full-bore flow through the straight neck, no elbow slowing the pour
• Secure clamped retention on 1.5" fill hose

Features

• Straight remote mount fill neck with 1.5" hose barb
• Machined aluminum construction; panel mounting
• Caps sold separately: vented or non-vented per the vent architecture

The Details

The straight geometry serves installs where the fill hose drops directly below the panel, keeping the pour path unrestricted, with angled siblings covering the installs that need the turn built in. Cap choice follows the venting, with a vented cap for neck-breathing systems and sealed where dedicated vent lines do the work, and the fill hose falls continuously to the tank without traps. Seat the hose fully on the barb and clamp for the diameter. Mount, plumb, cap, done.

Kit Includes

• 1x Straight remote mount fill neck with 1.5" barb (20-0527)
• Cap sold separately

Applications

• Remote fill installations running 1.5" fill hose
• Pairs with Radium vented and non-vented caps