Radium Low Profile Swiveling Banjo Fittings | Universal (20-1000-0810B / 20-1000-0865 / 20-1000-1010B)

A banjo that swivels and sits low is the difference between a clean install and a hose that fouls the strut tower.

These Radium Engineering low profile swiveling banjo fittings thread into an ORB port and let the barb rotate to any angle, so hose routing is decided on the car rather than dictated by the port's orientation. The low profile body clears surrounding components where a conventional banjo would not.

Choose Your Fitting

• 8AN ORB swivel banjo to 10mm barb (20-1000-0810B)
• 8AN ORB swivel banjo to 6.5mm barb (20-1000-0865)
• 10AN ORB swivel banjo to 10mm barb (20-1000-1010B)

Features

• Swiveling barb allowing 360 degree hose orientation
• Low profile body for tight clearance
• 8AN ORB (3/4in-16) or 10AN ORB (7/8in-14) thread depending on selection
• Anodized aluminum construction
• O-ring sealed, not tapered pipe thread

The Details

Two decisions here: the ORB thread size that matches your port, and the barb size that matches your hose. The 10mm barb suits common PCV and vent hose, while the 6.5mm barb suits smaller vacuum and breather lines. Because the barb swivels, one part covers routing directions that would otherwise need several fixed-angle fittings on the shelf.

Note that swivel banjo bodies in the 20-1000 series sit deeper than a plain plug, so on catch cans check clearance before ordering. Radium's Competition cans and baffle plates accommodate the extra depth; standard and Fluid Lock cans may not.

Applications

• Universal, any matching 8AN or 10AN ORB port

Important Notes

• Match both the ORB thread size and the barb size to your application
• Check port depth clearance on catch cans before ordering