Radium Porsche fuel pump connector harness 17-0053

Vendor:Radium Engineering

Radium Fuel Pump Install Kit and Harnesses | Porsche 996 Turbo (20-0276-00 / 17-0053 / 17-0054)

SKU: 20-0276-00

Part
Part: Fuel Pump Install Kit, 996 Turbo (20-0276-00)
$56.95
From Shawn: Not sure this product is right for your build? Email me at service@tunedbyshawn.com before you order. I answer these myself.

ECUs always ship FREE with Tuned By Shawn!

Manufacturer Limited Warranty

Product details

Description

A 39mm aftermarket pump does not fit a 43mm hanger. This sleeve is what bridges that.

The Radium Engineering fuel pump install kit for the Porsche 996 Turbo is built around a 6061-T6 CNC billet aluminum sleeve that slides over a 39mm aftermarket pump to mimic the larger 43mm diameter the factory hanger expects. A machined rib snaps into the fuel pump hanger and properly locates the filter sock. The necessary electrical components are included to make the install plug and play, with no cutting, drilling, or grinding.

Choose Your Part

  • Fuel pump install kit, pump not included (20-0276-00)
  • Fuel pump connector harness, Porsche, Walbro 255 (17-0053)
  • Fuel pump connector harness, Porsche, Walbro E85 (17-0054)

What You'll Feel

  • An aftermarket pump properly located in the factory hanger
  • The filter sock positioned correctly rather than sitting wrong in the tank
  • A plug and play electrical install with nothing cut or spliced
  • Anodized hardware resistant to all fuel types

Features

  • 6061-T6 CNC billet aluminum sleeve, 39mm pump to 43mm hanger
  • Machined rib that snaps into the hanger and locates the filter sock
  • Electrical components for a plug and play install
  • Anodized and resistant to all fuel types
  • No cutting, drilling, or grinding required

The Details

Measure your pump before ordering. The sleeve is designed for 39mm diameter pump bodies. If your pump is larger or smaller than 39mm, the sleeve may not work, so check the outside diameter against your chosen pump rather than assuming.

Match the harness to the pump, not to the car: the 17-0053 suits the Walbro 255 and the 17-0054 suits the Walbro E85 pump. Using a proper connector harness rather than splicing keeps the install serviceable and avoids a joint sitting in fuel, which is the usual failure point on a spliced pump wire.

Kit Includes

  • 20-0276-00: billet aluminum pump sleeve and electrical components
  • 17-0053 / 17-0054: one connector harness
  • NOT included: the fuel pump

Applications

  • 2001-2004 Porsche 911 Turbo (996)
  • Harnesses suit Porsche applications with the listed Walbro pumps

Important Notes

  • Sleeve fits 39mm diameter pump bodies only; measure before ordering
  • Fuel pump sold separately
  • Match the harness to your chosen pump; 255 and E85 harnesses differ