Radium Engineering 10AN Male Swivel Banjo 18.0mm Press Fit Fitting | Universal (20-0408)

Competition breather lines start at the valve cover, and Toyota only gave you a rubber grommet there.

The Radium Engineering 10AN Male Swivel Banjo 18.0mm Press-Fit Fitting converts the OEM PCV valve port on the intake side valve cover from its original press-in into a low profile 10AN male swivel connection, sized for the large breather lines a competition catch can system runs. Stainless and aluminum construction, anodized and laser engraved, sealing with Viton O-rings and swiveling to clock the hose wherever routing demands. Installation is a simple press-fit into the 18mm hole, no drilling or welding required. The 9.3mm long snout suits the intake cover geometry; on a 2JZ, order this together with the 13.5mm 20-0409 for the exhaust side.

What You'll Feel

• Full-size 10AN breather plumbing anchored right at the PCV port
• Hose routing freedom from the swivel action, no fighting a fixed barb angle
• Boost-and-oil sealing from the Viton O-rings
• A press-in install leaving the valve cover unmodified

Features

• Low profile 10AN male swivel banjo, 18.0mm press-fit, 9.3mm long snout
• Stainless/aluminum construction, anodized and laser engraved
• Swivel action with Viton O-rings; simple press-fit, no drilling or welding
• Direct replacement for the PCV valve press-in on the intake side valve cover

The Details

Confirmed fitment covers the 2JZ-GTE, 2JZ-GTE VVT-i, and 1JZ-GTE VVT-i intake side valve covers, plus 1JZ-GE VVT-i, 1JZ-GTE non VVT-i, 2JZ-GE non VVT-i, and 2JZ-GE VVT-i from 2000 to May 2002 only. The broader rule Radium publishes reaches across the Toyota and Lexus catalog: if the PCV valve mounts to the valve cover with rubber grommet 90480-18001, this fitting works with the grommet removed, a test that passes on dozens of models from Supra and Soarer to GS300, LS400, Land Cruiser, and Tundra, generally excluding 2JZ-GE VVT-i variants. Note that removing the OEM PCV valve means check-valve function must live elsewhere in your catch can circuit before the system sees boost. Sold individually.

Kit Includes

• 1x 10AN male swivel banjo, 18.0mm press-fit (20-0408)

Applications

• Toyota 1JZ/2JZ intake side valve covers: 2JZ-GTE, 2JZ-GTE VVT-i, 1JZ-GTE VVT-i, and more
• Any Toyota/Lexus PCV port using rubber grommet 90480-18001 (grommet removed)
• 2JZ engines: pair with 20-0409 for the exhaust side