Radium 12mm SAE Female To Dual 12mm SAE Male Tee | Universal (14-0803)

Splicing a modern quick connect line usually means cutting it. This fitting means you do not have to.

The Radium Engineering 12mm SAE tee fitting inserts into an existing 12mm SAE quick connect line and splits it, with a 12mm SAE female inlet, a 12mm SAE male outlet carrying the original circuit onward, and a second 12mm SAE male branch for whatever you are adding. The factory line snaps back together through the tee with no cutting and no permanent modification. Machined from billet aluminum and anodized for corrosion protection.

Features

• Inlet: 12mm SAE quick connect female
• Outlets: two 12mm SAE quick connect males
• Splices into an existing quick connect line without cutting
• Billet aluminum, type-II anodized
• Compatible with all fuel types including E85

The Details

This is the fitting for adding a sensor port, a return branch, or a secondary feed to a factory line that was never designed to be opened. SAE quick connect sizing is measured by the outside diameter of the male fitting, so confirm 12mm before ordering. Always lubricate the mating O-rings with a light amount of oil before installing; dry assembly is the most common cause of a nicked O-ring and a weep. Keep in mind that a tee splits flow rather than adding it, so size the upstream supply for the total demand of both branches.

Applications

• Universal, any 12mm SAE quick connect line requiring a branch