Nexus High Power Igniter Module - 15 Amp Eight Channel Module Only (HT-020058)

Haltech Nexus High Power Igniter Module - 15 Amp Eight Channel

The Nexus High Power Igniter is an 8 channel, 15 amp per channel ignition driver for coils that need an external igniter. Your ECU sends a low current trigger signal and the module switches the coil negative side for each cylinder, so you can run high-energy non-smart coils on a Haltech or most other aftermarket ECUs.

It is built in a compact housing that fits tight cabin or engine bay installs, and it carries an IP66 rating: dust tight and protected against powerful water jets.

Key Features

• 8 channel high current ignition driver
• 15 amps per channel
• Compatible with Haltech ECUs and most aftermarket ECUs
• Compact design for tight cabin or engine bay installations
• Supports multiple ignition system configurations
• IP66 rated: dust tight and protected against powerful water jets

Specifications

What's Included

• 1 x Nexus High Power Igniter Module

Compatibility

• Suits non-smart (non internally ignited) ignition coils that need an external igniter driver
• Works with Haltech ECUs and most aftermarket ECUs
• Not needed for smart coils with a built-in igniter, which are triggered straight from the ECU

Important Notes

• Module only. The mating connector, pins and wiring are not included.
• Emissions notice: Haltech products are designed and sold for sanctioned off-road and competition non-emissions controlled vehicles only. It is the responsibility of the installer and user to ensure compliance with all applicable local and federal laws.

Why Buy From Tuned By Shawn

Tuned By Shawn is a Platinum Haltech dealer with in-house wiring and remote tuning services. Not sure whether your coils need an igniter? Email service@tunedbyshawn.com with your coil part number and ECU before you order, and Shawn will confirm the right setup.