Haltech Nexus Plug-in ECU Nissan 300ZX / Fairlady Z32 (HT-231803)

A Z32 on full Nexus standalone control, straight into the factory plug.

The Haltech Nexus Plug-in ECU for the Nissan 300ZX / Fairlady Z32 plugs directly into the factory engine harness and mounts in the factory ECU location with the supplied brackets. The auxiliary connector unlocks OEM Plus functions the stock car never had, including O2 control, flex fuel, oil pressure and fuel pressure monitoring, and drive by wire throttle. On top of that, the Nexus platform brings race functionality: CO2 boost control, race timer, advanced torque management, launch control, nitrous control and 128MB of onboard data logging. Setup runs through the wizard in NSP or the Haltech Connect app on your phone, and onboard Wi-Fi handles diagnostics and tuning without a cable.

What You'll Feel

Factory start-up and idle manners with the ceiling removed. Fuel, ignition, boost and cam control become fully programmable and are tuned to your injectors, your boost setup and your fuel. Closed loop O2 control and long term learning keep the car consistent day to day, dual knock control lets the calibration run with confidence, and the onboard wideband means you see exactly what the VG30 is doing on every pull.

Features

Nexus Plug-in ECU Features

• Drive by wire throttle support
• Single channel onboard wideband control, supports LSU4.9 and NTK
• Wi-Fi
• 4 channel onboard oscilloscope
• Data logging 128MB
• Flex fuel
• Closed loop O2 control
• Dual knock control
• Variable cam control
• Long term learning

Auxiliary Connector

• 4 x digital pulsed outputs
• 4 x synchronized pulsed inputs
• 4 x analog voltage inputs
• 2 x half bridge outputs
• 1 x onboard wideband
• 2 x sensor ground
• 2 x 12V output
• 2 x 5V output

Supported OEM Functionality

• Variable speed fuel pump
• Boost control
• A/C output
• Idle control
• Thermofan
• VCT switched (N-VCT)
• Check engine light
• Fuel pump control module
• Narrowband sensors
• Vehicle speed

The Details

• SKU: HT-231803
• Unit: Nexus Plug-in Nissan 76 pin 6 cylinder ECU
• Software: Haltech NSP or the Haltech Connect app
• Transmission: manual only

Kit Includes

• Nexus Plug-in Nissan 76 pin 6 cylinder ECU
• Air temperature + wideband expansion harness 2.5m (8') and spare pins
• Air temperature sensor (1/8" NPT)
• Aluminum bung for air temperature sensor
• Mounting brackets and hardware to suit Nissan Fairlady Z32 OEM mounting locations
• 3mm vacuum hose 2.5m (8')
• 3mm aluminum vacuum T piece
• Haltech USB-C cable
• Quick start guide

Applications

Plug 'n' play replacement of the factory ECU for the Nissan 300ZX / Fairlady Z32. Supports manual transmission vehicles only; automatic Z32s are not supported by this unit. The Nexus Plug-in IO Expansion Harness (HT-189002) and Nexus Plug-in DBW Expansion Harness (HT-189003) are available separately for builds using the auxiliary connector functions. Unsure about fitment for your build? Send us your engine and chassis details before ordering and we will confirm compatibility.

Tuned By Shawn is a Platinum Haltech Dealer. We build wiring in house and run remote tuning sessions over live Zoom, so once this is in the car we can calibrate it on your injectors, your fuel and your combination without the Z leaving your garage.