Double Ended Banjo to AN Adapter

Feed one banjo from two lines, or tee two banjos off one bolt boss.

Occasionally a banjo joint needs to multiply. The Finish Line Factory Double Ended Banjo to AN Adapter stacks that capability into one piece: banjo eyes for 10.2mm, 12.5mm, 14.5mm bolts feeding male AN flares in 3AN, 4AN, 6AN. Great for teeing off a banjo connection or feeding a single banjo from two different sources, with the AN ends making every downstream connection serviceable.

Benefits

• A two-line banjo problem becomes ordinary AN plumbing downstream
• Crush washers seal the joint once; AN ends handle every service after
• The eyes clock freely before the bolt draws down, so hoses aim naturally
• One machined piece where a fabricated manifold used to be the only option

Features

• Dual banjo eyes for 10.2mm, 12.5mm, 14.5mm banjo bolts
• Male AN flare outlets: 3AN, 4AN, 6AN
• Tees or merges flow at a single banjo boss
• 37 degree flare sealing on the AN ends; crush washer sealing at the eyes
• Sold as a single adapter

The Details

The banjo end seals like every banjo joint: fresh crush washers each side of each eye, clean faces, even torque on a correctly sized bolt, and stacked eyes need a bolt with the longer under-head length. Once the bolt is torqued, the eyes are fixed, which is why the AN outlets matter; hoses connect and disconnect at the flares forever after without disturbing the crush washers. Aim the eyes before final torque, back the adapter while attaching hose ends, and treat the assembly as one unit from then on. Anywhere two feeds converge on one boss, or one feed must split at the boss itself, this is the one-piece answer.

Kit Includes

• 1x Double Ended Banjo to AN Adapter (size per your selection)

Applications

• Banjo sizes: 10.2mm, 12.5mm, 14.5mm; AN outlets: 3AN, 4AN, 6AN
• Common uses: teeing a gauge feed off a turbo oil banjo, merging dual feeds at one boss, splitting a supply at the banjo
• Pairs with FLF banjo bolts (correct UHL for stacked eyes) and crush washers