AN to AN Swivel Coupler - 45 Degree

Half the corner, none of the kink: 45 degrees earns its place in every parts drawer.

Joining two male AN flares normally means at least one side must spin, which hard-mounted components refuse to do. The Finish Line Factory AN to AN Swivel Coupler - 45 Degree solves it with a swivel in the middle: female AN both ends, one of them free-rotating, in sizes 3AN, 4AN, 6AN, 8AN, 10AN, 12AN, 16AN with a 45 degree body. Twist and go, exactly as advertised.

Benefits

• Connects two fixed male flares without loosening either component
• Routing relaxes into place where a straight end used to fight you
• The swivel spins freely right up until the nut seats
• Rigid fitting-to-fitting joins replace short jumper hoses that flexed and chafed

Features

• Female AN connection both ends, swivel action for blind assembly
• 45 Degree body
• Sizes: 3AN, 4AN, 6AN, 8AN, 10AN, 12AN, 16AN
• 37 degree flare sealing at both joints
• Suits fuel, oil, water, and air delivery
• Sold as a single coupler

The Details

A 45 degree sweep splits the difference between straight and a full corner, taking strain out of the hose where a right angle would overshoot the routing. Seals metal to metal on the 37 degree AN flare, no sealant, no tape, ever. The swivel is what makes blind assembly possible: with both mating components bolted down, the coupler's free-rotating nut draws the joint together without either side turning. That replaces the classic bodge of a three-inch jumper hose between two fittings, which always chafed and never looked intentional. Back up the flats while torquing each end, inspect both flare cones first, and if the two ports differ in size, step through a reducer rather than forcing the geometry.

Kit Includes

• 1x AN to AN Swivel Coupler - 45 Degree (size per your selection)

Applications

• Sizes: 3AN, 4AN, 6AN, 8AN, 10AN, 12AN, 16AN, same size both ends
• Common uses: joining hard-mounted components port to port, fuel rail to regulator bridges, filter-to-filter stacks, tight fitting-to-fitting connections
• Mates to male AN flares in the matching size on both sides