What the quick start guide is for
The quick start guide is a condensed, visual reference for the Elite Pro Plug-in ECU for the Ford Falcon I6 Barra. It's the document you want on the bench during the swap, before you dig into the detailed pages for each topic.
When you need it
Use it during the first install and first start, and any time you're adding wiring to the auxiliary connector. For the details behind it, use our full pages: the ECU overview, the auxiliary connector, example wiring configurations and ZF 6-speed support.
What to check before first start
- The ECU matches your vehicle, and a suitable map is loaded before the car powers it.
- Any added sensors on the auxiliary connector are wired and assigned in ESP.
- Fuel pressure, base timing and wideband readings are verified before any load is applied.
Need this diagram? Ask us and we'll send it over with advice for your build.
