This table only appears once progressive nitrous control is turned on. It sets the duty cycle the nitrous solenoid is pulsed at while the system is active. Low duty means a smaller effective shot; higher duty lets more through. Mapping duty over time is how you ramp the shot in smoothly so the tires can cope.
Set the axis to Nitrous Progressive Timer, so the duty follows time since activation. It supports up to 3D mapping if you want a second axis.
What to check
- The fuel side is ramped to match. See fuel solenoid duty cycle for wet kits.
- Timing is pulled for the shot with nitrous ignition correction.
- The solenoid is wired and tested per nitrous controller wiring.
Need this diagram? Ask us and we'll send it over with advice for your build.
