This module is primarily for applications that would like to have traction control to read the speed on all 4 wheel's. Also this module is needed for any application that has quad VVT. It also includes an additional flex fuel sensor input if your application uses all 3 CAS sensor's on the main control board.
- +2 x CAS
- +1 x Flex Fuel Input
- +3 x VSS
Once you install the module if you connect to the ecu via Eugene software on your PC you can go to the home tab then wiring guide and see the pin-out location for the new inputs. This also enables the traction control section under the functions tab in Eugene.