{"product_id":"rywire-universal-race-chassis-harness-with-30-channel-pdm-and-can-keypad","title":"Rywire Universal Race Chassis Harness With 30-Channel PDM and CAN Keypad (chassis-harness-universal-p30)","description":"\u003cp\u003eRywire \u003cstrong\u003echassis-harness-universal-p30\u003c\/strong\u003e is a universal race chassis harness with a 30-channel solid-state power distribution module (PDM). It wires up any car, from a K-swapped Honda to a 2JZ or rotary build, with programmable fuse-less outputs instead of fuses and relays. The harness is built with Tefzel wire, Deutsch and AMP connectors and split-sleeve loom, plugs into Rywire engine harnesses and also works universally with color-coded flying leads.\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUniversal: any chassis, race car, off-road car or project build\u003c\/li\u003e\n\u003cli\u003eCan be built to plug into Rywire engine harnesses or used universally\u003c\/li\u003e\n\u003cli\u003eFront, rear and gauge circuits come as color-coded flying leads to wire into your chassis\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMoristech 30-channel solid-state, fuse-less PDM\u003c\/li\u003e\n\u003cli\u003eEight 20 A outputs, twenty-two 8 A outputs, 23 switched inputs, 120 A maximum\u003c\/li\u003e\n\u003cli\u003eOutputs can be stacked: two 20 A outputs for 40 A, two 8 A outputs for 16 A\u003c\/li\u003e\n\u003cli\u003eCAN keypad with 15 soft-touch buttons and green\/yellow\/red status LEDs\u003c\/li\u003e\n\u003cli\u003eProgrammable outputs with PC software; outputs can be re-assigned by the user\u003c\/li\u003e\n\u003cli\u003eOn-board data logging of total and per-output current draw\u003c\/li\u003e\n\u003cli\u003ePre-programmed and pre-assigned out of the box, so no logic to learn before first start\u003c\/li\u003e\n\u003cli\u003eTefzel wire with Deutsch and AMP connectors\u003c\/li\u003e\n\u003cli\u003eColor-coded wires and split-sleeve loom so circuits can be re-directed cleanly\u003c\/li\u003e\n\u003cli\u003ePlugs into Rywire engine harnesses or can be used universally\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePre-Configured Outputs and Inputs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e20 A outputs: starter, coils, fuel pumps (2), fans (2), spare\u003c\/li\u003e\n\u003cli\u003e8 A outputs: injectors, engine computer, right and left indicators, brake lights, lift fuel pump, headlights and taillights, CAN power, wiper low, wiper high, brake switch, plus spares on each plug\u003c\/li\u003e\n\u003cli\u003eInputs (high or low active): CAN keypad plus 23 universal switched inputs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRecommended Add-Ons\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRywire Water Resistant Mini USB PDM Comms Cable: for programming the PDM, 80 in long.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAdd any of these from the Recommended Add-Ons list above. Each one is its own listing.\u003c\/p\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e30-channel solid-state PDM, pre-configured\u003c\/li\u003e\n\u003cli\u003e15-button CAN keypad with sticker sheet\u003c\/li\u003e\n\u003cli\u003eTefzel chassis wiring harness with Deutsch and AMP connectors\u003c\/li\u003e\n\u003cli\u003eWiring instructions with pin-out, wire colors and schematic\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs this harness meant for a street car?\u003c\/h3\u003e\u003cp\u003eNot really. It is a stripped-down race system with no provision for daily-driver comforts.\u003c\/p\u003e\u003ch3\u003eDoes it have air conditioning circuits?\u003c\/h3\u003e\u003cp\u003eThere are no pre-wired circuits for factory A\/C, but aftermarket A\/C systems are easy to add.\u003c\/p\u003e\u003ch3\u003eCan it run power windows?\u003c\/h3\u003e\u003cp\u003eIt can power them, but they are not pre-wired. Rywire recommends feeding power windows from a fused constant source and keeping them off the PDM harness.\u003c\/p\u003e\u003ch3\u003eCan outputs be combined for more current?\u003c\/h3\u003e\u003cp\u003eYes. Two 20 A outputs can be stacked for 40 A, and two 8 A outputs for 16 A.\u003c\/p\u003e\u003ch3\u003eHow long does it take to build?\u003c\/h3\u003e\u003cp\u003eEach system is built to order and may have a lead time. Email service@tunedbyshawn.com with your engine, chassis and ECU before ordering if you are unsure which configuration you need.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFor off-road and competition use only. Not legal for use on pollution-controlled motor vehicles.\u003c\/em\u003e\u003c\/p\u003e","brand":"Rywire","offers":[{"title":"Default Title","offer_id":67665056104515,"sku":"chassis-harness-universal-p30","price":3100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/rywire-chassis-harness-universal-p30-1.jpg?v=1791556064","url":"https:\/\/www.tunedbyshawn.com\/products\/rywire-universal-race-chassis-harness-with-30-channel-pdm-and-can-keypad","provider":"Tuned by Shawn","version":"1.0","type":"link"}