{"product_id":"rywire-mil-spec-tucked-s2000-f20c-f22c-engine-harness","title":"Rywire Mil-Spec Tucked S2000 F20C\/F22C Engine Harness (S2K-Milspec)","description":"\u003cp\u003eRywire \u003cstrong\u003eS2K-Milspec\u003c\/strong\u003e is a mil-spec tucked engine harness for the Honda S2000 F20C and F22C. It uses Teflon-coated wire rated to 200°C in the standard factory wire colors, looms everything in Raychem DR-25 heat shrink with adhesive-lined junctions, and plugs into the stock computer plugs so any aftermarket computer that uses OEM plugs is plug and play. Built to order by Rywire in the USA.\u003c\/p\u003e\u003ch2\u003eWhy This Mil-Spec S2000 F20C\/F22C Engine Harness\u003c\/h2\u003e\u003cp\u003eThe Rywire S2K-Milspec is a new mil-spec tucked S2000 F20C\/F22C engine harness in factory wire colors that plugs into the stock computer plugs, replacing an aging original harness.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersus repairing the factory harness:\u003c\/strong\u003e this Rywire S2000 harness is all-new wire, pins and plugs, pneumatically crimped, ID-labeled at every connector, and pin-to-pin and resistance tested before shipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersus a used junkyard harness:\u003c\/strong\u003e this Rywire S2000 harness needs no core and is built with the injector plug chosen at checkout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersus a universal flying-lead harness:\u003c\/strong\u003e this Rywire S2000 harness ends in OEM computer plugs B and C, so any aftermarket computer using the OEM plugs is plug and play.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory colors, mil-spec materials:\u003c\/strong\u003e this Rywire S2000 harness uses 200 C Teflon-coated wire in factory colors, Raychem DR-25 heat shrink, adhesive-lined junctions and shielded high-interference circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTucked bay:\u003c\/strong\u003e this Rywire S2000 harness uses tucked routing, and Rywire can build in a firewall quick disconnect on request.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e S2000 F20C and F22C engines on the stock computer or an OEM-plug aftermarket computer, where a new tucked harness beats repairing the original.\u003c\/p\u003e\u003ch2\u003eEngine Swap Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHonda S2000 F20C and F22C engines\u003c\/li\u003e\n\u003cli\u003ePlug and play with aftermarket computers that use the OEM S2000 computer plugs (B and C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMil-spec Teflon-coated wire rated to 200°C, in factory wire colors\u003c\/li\u003e\n\u003cli\u003eRaychem DR-25 heat shrink with adhesive-lined junctions\u003c\/li\u003e\n\u003cli\u003eAll-new connectors with pneumatic-head crimps\u003c\/li\u003e\n\u003cli\u003eYellow ID label on every connector\u003c\/li\u003e\n\u003cli\u003eHigh-interference circuits shielded and grounded\u003c\/li\u003e\n\u003cli\u003e100% pin-to-pin tested and resistance checked\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConnector List\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOil pressure sending unit\u003c\/li\u003e\n\u003cli\u003eKnock sensor\u003c\/li\u003e\n\u003cli\u003eIntake air temperature (intake manifold style)\u003c\/li\u003e\n\u003cli\u003ePrimary oxygen sensor (4-wire)\u003c\/li\u003e\n\u003cli\u003eAlternator\u003c\/li\u003e\n\u003cli\u003e2 extra wires\u003c\/li\u003e\n\u003cli\u003eInjectors 1-4\u003c\/li\u003e\n\u003cli\u003eMAP sensor\u003c\/li\u003e\n\u003cli\u003eTPS (throttle position)\u003c\/li\u003e\n\u003cli\u003eCoils 1-4\u003c\/li\u003e\n\u003cli\u003eElectronic speed sensor\u003c\/li\u003e\n\u003cli\u003eGround\u003c\/li\u003e\n\u003cli\u003eFan switch\u003c\/li\u003e\n\u003cli\u003eIntake cam\u003c\/li\u003e\n\u003cli\u003eExhaust cam\u003c\/li\u003e\n\u003cli\u003eReverse lights\u003c\/li\u003e\n\u003cli\u003eEngine coolant temperature\u003c\/li\u003e\n\u003cli\u003eStarter signal\u003c\/li\u003e\n\u003cli\u003eVTEC solenoid\u003c\/li\u003e\n\u003cli\u003eComputer plugs B and C\u003c\/li\u003e\n\u003cli\u003ePower distribution cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoosing Options\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInjector Plug\u003c\/strong\u003e: pick the plug that matches your injectors: RDX; Nippon Denso \/ Injector Dynamics 2000cc; NH1 \/ Honda OBD2; Delphi; Bosch EV6; Bosch EV1 \/ Honda OBD1; or Bosch EV14 (all other Injector Dynamics types).\u003c\/li\u003e\n\u003cli\u003eRywire can also build in a mil-spec firewall quick-disconnect plug; ask us for a quote if you want one.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRecommended Add-Ons\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRywire Mil-Spec Firewall Quick Disconnect Plug - Harness Build Option.\u003c\/li\u003e\n\u003cli\u003eRywire RyTi Titanium VTEC Solenoid Bolt - VTEC Oil Pressure Switch Delete.\u003c\/li\u003e\n\u003cli\u003eRywire One-Piece Charge Harness - Honda B\/D\/F\/H\/K-Series Swap Harnesses.\u003c\/li\u003e\n\u003cli\u003eRywire Engine Ground Kit - 4-Gauge Battery Cable \u0026amp; 8-Gauge Grounds for Swap Harnesses.\u003c\/li\u003e\n\u003cli\u003eRywire Mil-Spec Connector Plate, 3 x 5 in - A\/C Firewall Hole Harness Pass-Through.\u003c\/li\u003e\n\u003cli\u003eRywire Mil-Spec Connector Plate, 3 x 3 in - A\/C Firewall Hole Harness Pass-Through.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAdd any of these from the Recommended Add-Ons list above. Each one is its own listing.\u003c\/p\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eS2000 F20C\/F22C mil-spec tucked engine harness with your chosen injector plugs\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhich computer does it work with?\u003c\/h3\u003e\u003cp\u003eAny aftermarket engine computer that uses the OEM S2000 computer plugs. The harness terminates in computer plugs B and C.\u003c\/p\u003e\u003ch3\u003eDo I need the charge harness?\u003c\/h3\u003e\u003cp\u003eRywire suggests it for everyone. It adds the starter and alternator leads to the fuse box; skip it only if you are running your own alternator power lead.\u003c\/p\u003e\u003ch3\u003eWhich injector plug should I choose?\u003c\/h3\u003e\u003cp\u003eMatch the plug to your injectors. Use Bosch EV14 for Injector Dynamics injectors other than the ID2000, and Nippon Denso for the ID2000. Email service@tunedbyshawn.com with your engine, chassis and ECU before ordering if you are unsure which configuration you need. Tuned By Shawn can tune your swap on Haltech.\u003c\/p\u003e\u003c!-- why-faq --\u003e\u003ch3\u003eShould I repair my S2000 engine harness or replace it with a Rywire mil-spec harness?\u003c\/h3\u003e\u003cp\u003eA repair keeps the original wire and plugs. The Rywire S2K-Milspec replaces them with all-new, tested mil-spec wiring in factory colors that plugs into the OEM computer plugs B and C.\u003c\/p\u003e\u003c!-- \/why-faq --\u003e\u003cp\u003e\u003cem\u003eFor off-road and competition use only. Not legal for use on pollution-controlled motor vehicles.\u003c\/em\u003e\u003c\/p\u003e","brand":"Rywire","offers":[{"title":"RDX","offer_id":67665086316611,"sku":"S2K-Milspec-01","price":1749.0,"currency_code":"USD","in_stock":true},{"title":"Nippon Denso \/ ID2000","offer_id":67665086349379,"sku":"S2K-Milspec-02","price":1749.0,"currency_code":"USD","in_stock":true},{"title":"NH1 \/ Honda OBD2","offer_id":67665086382147,"sku":"S2K-Milspec-03","price":1749.0,"currency_code":"USD","in_stock":true},{"title":"Delphi","offer_id":67665086414915,"sku":"S2K-Milspec-04","price":1749.0,"currency_code":"USD","in_stock":true},{"title":"Bosch EV6","offer_id":67665086447683,"sku":"S2K-Milspec-05","price":1749.0,"currency_code":"USD","in_stock":true},{"title":"Bosch EV1 \/ Honda OBD1","offer_id":67665086480451,"sku":"S2K-Milspec-06","price":1749.0,"currency_code":"USD","in_stock":true},{"title":"Bosch EV14 (Other ID Types)","offer_id":67665086513219,"sku":"S2K-Milspec-07","price":1749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/rywire-s2k-milspec-1.jpg?v=1791556143","url":"https:\/\/www.tunedbyshawn.com\/products\/rywire-mil-spec-tucked-s2000-f20c-f22c-engine-harness","provider":"Tuned by Shawn","version":"1.0","type":"link"}