{"product_id":"radium-sae-fuel-level-sender-0-90-ohm-11-7in-universal-20-0747-297","title":"Radium SAE Fuel Level Sender 0-90 Ohm 11.7in | Universal (20-0747-297)","description":"\u003cp\u003e\u003cstrong\u003eA fuel cell without a level sender is a guessing game with a race on the line.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eRadium Engineering SAE Fuel Level Sender\u003c\/strong\u003e is a float-style sending unit with the standard SAE 5-bolt mounting pattern, fitting most fuel cells and extensively used with Radium fuel cell surge tanks. This 11.7\" probe version reads 0 ohms empty to 90 ohms full, the standard range popular with many aftermarket gauges, through a rugged design featuring an FR4 conformal-coated PCB, epoxy potted electrical terminals, and an anodized surface finish suiting gasoline, diesel, and all alcohol based fuels including methanol, ethanol, and E85. Made in Portland, USA, with the gasket, stainless hardware, and Deutsch connector included. Gauge not included.\u003c\/p\u003e\n\u003ch3\u003eWhat You'll Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReal fuel level data in a cell installation instead of stopwatch mathematics\u003c\/li\u003e\n\u003cli\u003eAftermarket gauge compatibility from the standard 0-90 ohm output\u003c\/li\u003e\n\u003cli\u003eAll-fuel durability, with methanol and E85 explicitly on the approved list\u003c\/li\u003e\n\u003cli\u003eA sealed, race-grade install meeting SAE J1810's 6+ psi internal pressure standard when mounted properly\u003c\/li\u003e\n\u003cli\u003eClean wiring through the included Deutsch DT connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFloat-style fuel level sender, SAE 5-bolt mounting pattern, 11.7\" probe length (20-0747-297)\u003c\/li\u003e\n\u003cli\u003eResistance output: 0 ohms empty to 90 ohms full (common aftermarket standard)\u003c\/li\u003e\n\u003cli\u003eFR4 conformal-coated PCB, epoxy potted terminals, anodized finish\u003c\/li\u003e\n\u003cli\u003eSuitable for gasoline, diesel, methanol, ethanol, E85, and all alcohol based fuels\u003c\/li\u003e\n\u003cli\u003eGasket seal withstands over 6 psi internal tank pressure per SAE J1810 when properly mounted\u003c\/li\u003e\n\u003cli\u003eMade in Portland, USA; 1 year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Details\u003c\/h3\u003e\n\u003cp\u003eProbe length is the sizing question, and 11.7\" suits mid-depth cells, so measure your tank's internal depth and select the Radium length matching it, with other lengths sold separately. Compatibility notes from Radium worth reading before wiring: the 0-90 ohm curve pairs directly with common aftermarket gauges, and if your OEM gauge expects a different range, a resistance signal converter is the documented path, though Radium has no direct experience with those products. Bench-test by measuring resistance between the two wires while tipping the sender so the float travels. Ordered with a Radium FCST or FCST-X, the sender arrives pre-installed; ordered alone, the 5-bolt gasket, stainless 10-32 bolts, and nylon sealing washers complete a leak-tight mount.\u003c\/p\u003e\n\u003ch3\u003eKit Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Level sensing probe, 11.7\"\u003c\/li\u003e\n\u003cli\u003e1x SAE 5-bolt gasket; 5x stainless 10-32 bolts; 5x nylon sealing washers\u003c\/li\u003e\n\u003cli\u003e1x Deutsch DT 2P connector with 2x sockets\u003c\/li\u003e\n\u003cli\u003eFuel level gauge NOT included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel cells and tanks with the SAE 5-bolt sender pattern; Radium FCST and FCST-X\u003c\/li\u003e\n\u003cli\u003e0-90 ohm aftermarket gauges; OEM gauges may require a resistance converter\u003c\/li\u003e\n\u003cli\u003eAll fuels: gasoline, diesel, methanol, ethanol, E85\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":43672696848451,"sku":"20-0747-297","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/radium-engineering-rad-20-0747-297-29454197817414_24567fc6-a4fb-4fb3-9c46-5406e110f48c.jpg?v=1786717167","url":"https:\/\/www.tunedbyshawn.com\/products\/radium-sae-fuel-level-sender-0-90-ohm-11-7in-universal-20-0747-297","provider":"Tuned by Shawn","version":"1.0","type":"link"}