{"product_id":"radium-fuel-vent-charcoal-canister-universal-20-1828-08-20-1828-12-20-1828-00","title":"Radium Fuel Vent Charcoal Canister | Universal (20-1828-08 \/ 20-1828-12 \/ 20-1828-00)","description":"\u003cp\u003e\u003cstrong\u003eA vented fuel cell smells like a fuel cell. This is the part that fixes it, and the test data is not subtle.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eRadium Engineering fuel vent charcoal canister\u003c\/strong\u003e installs in-line with the fuel tank or cell vent and traps the vapour that would otherwise exit to atmosphere. Radium measured the vent exit with a combustible gas detector: without a canister the meter maxed out beyond \u003cstrong\u003e10,000 ppm\u003c\/strong\u003e, and with one fitted it read \u003cstrong\u003ebelow 50 ppm\u003c\/strong\u003e, which is the detector's floor. Flow testing with a quick-fill dry break dump can showed negligible pressure drop, so the canister does not slow filling. Works with EFI and carbureted systems alike.\u003c\/p\u003e\n\u003ch3\u003eChoose Your Kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor 1\/2in hose (20-1828-08)\u003c\/strong\u003e: standard flow, pairs with the 20-0484-08 vent kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor 3\/4in hose (20-1828-12)\u003c\/strong\u003e: high flow, pairs with the 20-0484-12 vent kit, and a 3\/4in air filter attaches directly to the barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal (20-1828-00)\u003c\/strong\u003e: includes two 16AN ORB male to 10AN ORB female couplers for classic tanks running 1\/4in, 5\/16in, or 3\/8in vent line\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat You'll Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNo fuel smell in the garage, the trailer, or the paddock\u003c\/li\u003e\n\u003cli\u003eFill speed unchanged, verified against a dry break dump can\u003c\/li\u003e\n\u003cli\u003eA rebuildable canister rather than a throwaway part\u003c\/li\u003e\n\u003cli\u003ePorts that work either direction, so mounting orientation is your choice\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined 6061 aluminum, type-II anodized\u003c\/li\u003e\n\u003cli\u003eVibratory-packed activated carbon inside a 150 micron strainer and anodized baffle, so no carbon debris escapes\u003c\/li\u003e\n\u003cli\u003eTwo 16AN ORB (1-5\/16in-12) female ports, usable interchangeably as inlet or outlet\u003c\/li\u003e\n\u003cli\u003eTwo 4AN ORB (7\/16in-20) drain ports at the base with preinstalled plugs\u003c\/li\u003e\n\u003cli\u003eHolds 5x the activated carbon of the compact canister, requiring less frequent service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Details\u003c\/h3\u003e\n\u003cp\u003eThe standard canister is the one to buy if you would rather service it rarely: it carries five times the carbon of the compact version, though both test below 50 ppm at the outlet. Carbon saturates with use rather than time, so recharge intervals depend on how the car is used; the 20-1828-SK service kit supplies fresh carbon and a new 150 micron strainer when efficiency drops.\u003c\/p\u003e\n\u003cp\u003ePlumbing matters. A section of vent hose upstream of the air filter must sit \u003cstrong\u003ehigher than the fuel filler\u003c\/strong\u003e, and vent line loops are recommended to keep debris out of the fuel system. Mount the air filter at the rear of the car, away from the exhaust. Depending on mounting orientation, one of the two 4AN drain ports can take a petcock drain kit to remove any fuel that collects.\u003c\/p\u003e\n\u003ch3\u003eKit Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCharcoal canister with preassembled activated carbon, strainer, and baffle\u003c\/li\u003e\n\u003cli\u003eTwo 16AN ORB male to 10AN ORB female couplers (universal kit only)\u003c\/li\u003e\n\u003cli\u003eBarb fittings sized to the selected hose (08 and 12 kits)\u003c\/li\u003e\n\u003cli\u003ePreinstalled 4AN drain port plugs\u003c\/li\u003e\n\u003cli\u003eNOT included: vent hose, air filter, and additional adapter fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal, any EFI or carbureted fuel tank or competition fuel cell vent system\u003c\/li\u003e\n\u003cli\u003eDesigned to work alongside Radium fuel cell vent kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe activated carbon requires periodic replacement; use the 20-1828-SK service kit\u003c\/li\u003e\n\u003cli\u003eVent hose upstream of the air filter must be routed higher than the fuel filler\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"For 1\/2in Hose (20-1828-08)","offer_id":43700772765763,"sku":"20-1828-08","price":275.45,"currency_code":"USD","in_stock":true},{"title":"For 3\/4in Hose (20-1828-12)","offer_id":43700772798531,"sku":"20-1828-12","price":256.45,"currency_code":"USD","in_stock":true},{"title":"Universal (20-1828-00)","offer_id":43700772831299,"sku":"20-1828-00","price":246.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/20-1828-08_1200px_wide.jpg?v=1787354360","url":"https:\/\/www.tunedbyshawn.com\/products\/radium-fuel-vent-charcoal-canister-universal-20-1828-08-20-1828-12-20-1828-00","provider":"Tuned by Shawn","version":"1.0","type":"link"}