{"product_id":"radium-fuel-pump-hanger-1993-1997-honda-del-sol-20-3792-20-3790","title":"Radium Fuel Pump Hanger | 1993-1997 Honda Del Sol (20-3792 \/ 20-3790)","description":"\u003cp\u003e\u003cstrong\u003eThe stock Del Sol hanger is plastic and sized for a pump flowing around 100 LPH. That was fine for 130hp.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eRadium Engineering fuel pump hanger for the 1993-1997 Honda Del Sol\u003c\/strong\u003e replaces the entire factory assembly with billet anodized aluminum. It drops in with no cutting of the fuel tank or sheet metal, and positions the pump in the factory collector bowl so fuel does not slosh away from the pickup when you are hard on the throttle or low in the tank. Compatible with gasoline, E85, and methanol.\u003c\/p\u003e\n\u003ch3\u003eChoose Your Version\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Walbro GSS342 \/ AEM 50-1200 (20-3790)\u003c\/strong\u003e: also suits AEM 50-1000, 50-1220, 50-1230, and 50-1235\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Walbro F90000267 \/ 274 \/ 285 or brushless (20-3792)\u003c\/strong\u003e: also suits F90000295, Ti Automotive E5LM, Protec 11928, Fuelab 49614, Deatschwerks DW440 and DW810\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat You'll Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel delivery that supports a turbo or E85 build instead of capping it\u003c\/li\u003e\n\u003cli\u003eElectrical connections that carry pump current without melting or corroding\u003c\/li\u003e\n\u003cli\u003eBraided AN line from the hanger instead of adapting brittle stock hard lines\u003c\/li\u003e\n\u003cli\u003ePump serviceable through the access cover without dropping the tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBillet anodized aluminum, replacing the plastic OEM hanger entirely\u003c\/li\u003e\n\u003cli\u003e8AN ORB (3\/4in-16) female feed port with preinstalled 6AN male fitting\u003c\/li\u003e\n\u003cli\u003e6AN ORB (9\/16in-18) female return port with 6AN male fitting\u003c\/li\u003e\n\u003cli\u003eFittings machined low enough to clear the fuel pump access cover\u003c\/li\u003e\n\u003cli\u003eAnti-rotation stainless steel electrical studs, hermetically sealed and high current rated\u003c\/li\u003e\n\u003cli\u003eNon-conductive anodized acorn nuts preventing accidental shorts\u003c\/li\u003e\n\u003cli\u003eETFE insulated in-tank wiring, chemically resistant to gasoline, E85, and methanol\u003c\/li\u003e\n\u003cli\u003ePump strainers, clamps, and stainless hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Details\u003c\/h3\u003e\n\u003cp\u003eThe stock hanger's weakness is not only flow. Its plastic multi-pin connectors were never rated for the current a high flow pump draws, and the plastic embrittles and cracks with age. The Radium unit replaces those with sealed stainless studs, so fuel cannot migrate into the electrical connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck valves are worth checking.\u003c\/strong\u003e The AEM 50-1230 and 50-1235, the Walbro F90000295, and the Ti Automotive E5LM have no integrated check valve, so add an external one if you are running a return style system and want pressure to hold after shutdown.\u003c\/p\u003e\n\u003cp\u003eA single Walbro GSS342 install can reuse the OEM fuel pump wiring, though Radium recommends upgrading it so the pump sees full voltage. And note the brushless trade-off: \u003cstrong\u003ea brushless pump rules out the dual pump add-on\u003c\/strong\u003e, because the controller wiring cannot pass through the hanger alongside a second pump. Either run one brushless pump or two conventional pumps.\u003c\/p\u003e\n\u003ch3\u003eKit Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBillet fuel pump hanger with preinstalled 6AN male fittings on both ports\u003c\/li\u003e\n\u003cli\u003eFuel pump strainers, rubber hose, worm gear and small hose clamps\u003c\/li\u003e\n\u003cli\u003eElectrical eyelets, connection caps, heat shrink, flanged hex nuts, and zip ties\u003c\/li\u003e\n\u003cli\u003eNOT included: fuel pump, dual pump add-on, and connection kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1993-1997 Honda Civic Del Sol, all trims\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrushless pump installs cannot use the dual pump add-on due to the extra controller wiring\u003c\/li\u003e\n\u003cli\u003eAEM 50-1230, AEM 50-1235, Walbro F90000295, and Ti Automotive E5LM have no integrated check valve\u003c\/li\u003e\n\u003cli\u003eFuel pump sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Fits Walbro F90000267 \/ 274 \/ 285 or Brushless (20-3792)","offer_id":43700780990531,"sku":"20-3792","price":232.7,"currency_code":"USD","in_stock":true},{"title":"Fits Walbro GSS342 \/ AEM 50-1200 (20-3790)","offer_id":43700781023299,"sku":"20-3790","price":218.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/20-3790.jpg?v=1787355743","url":"https:\/\/www.tunedbyshawn.com\/products\/radium-fuel-pump-hanger-1993-1997-honda-del-sol-20-3792-20-3790","provider":"Tuned by Shawn","version":"1.0","type":"link"}