{"product_id":"radium-fuel-filter-kit-2015-ford-mustang-s550-s650-20-1819-03-20-1819-05-20-1829","title":"Radium Fuel Filter Kit | 2015+ Ford Mustang S550 S650 (20-1819-03 \/ 20-1819-05 \/ 20-1829)","description":"\u003cp\u003e\u003cstrong\u003eAn aftermarket hanger deletes the factory post-pump filter. Something has to replace it before the injectors find out.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eRadium Engineering fuel filter kit for the 2015 and newer Ford Mustang\u003c\/strong\u003e puts a proper low micron filter back into the feed side after a hanger swap. The large bracket bolts to OEM threaded holes under the brake booster near the LH strut tower, and its reflective finish doubles as a \u003cstrong\u003eheat shield protecting the fuel system from header heat\u003c\/strong\u003e, with the filter clamped inside it on a two-piece billet mount. 6AN PTFE hoses and fittings adapt to the OEM feed line and fuel rail, and a replacement EVAP line is included to simplify the install. No cutting or drilling.\u003c\/p\u003e\n\u003ch3\u003eChoose Your Kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless filter (20-1819-03)\u003c\/strong\u003e: complete kit with stainless element, hoses, and fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicroglass filter (20-1819-05)\u003c\/strong\u003e: complete kit with microglass element for finer filtration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount only (20-1829)\u003c\/strong\u003e: heat shield bracket and filter clamp, for builds sourcing their own filter and running custom plumbing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat You'll Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFiltration restored after a hanger install removes the OEM post-pump filter\u003c\/li\u003e\n\u003cli\u003eThe filter shielded from header heat rather than cooking beside it\u003c\/li\u003e\n\u003cli\u003ePTFE feed lines that handle E85 and methanol without permeation\u003c\/li\u003e\n\u003cli\u003eA bolt-in install on factory holes with no cutting or drilling\u003c\/li\u003e\n\u003cli\u003eThe EVAP line replaced rather than fought with\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowder coated aluminum heat shield bracket mounting to OEM threaded holes\u003c\/li\u003e\n\u003cli\u003eTwo-piece anodized billet aluminum filter clamp\u003c\/li\u003e\n\u003cli\u003eBillet aluminum filter with selectable element\u003c\/li\u003e\n\u003cli\u003eSAE quick connect to 6AN adapter fittings\u003c\/li\u003e\n\u003cli\u003eTwo 6AN PTFE fuel lines\u003c\/li\u003e\n\u003cli\u003e5\/16in EVAP line with hose ends and spring clamps\u003c\/li\u003e\n\u003cli\u003eSAE disconnect tool and stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eFilters withstand methanol, ethanol, and E85\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Details\u003c\/h3\u003e\n\u003cp\u003eThis kit exists because of a consequence most hanger buyers do not anticipate: aftermarket Mustang hangers typically eliminate the internal post-pump filter, leaving the injectors with no downstream protection. If you have fitted or plan to fit a hanger, this is not optional equipment.\u003c\/p\u003e\n\u003cp\u003eThe mount-only option is the right choice if you already own a filter or intend to run custom plumbing; it supplies the heat shield bracket, the billet clamp, and hardware, without the filter, hoses, or fittings. Note that the SAE disconnect tool is included in the complete kits, which saves a trip to the parts store on install day.\u003c\/p\u003e\n\u003ch3\u003eKit Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete kits\u003c\/strong\u003e: billet filter with selected element, powder coated heat shield bracket, 2pc billet filter mount, SAE quick connect to 6AN fittings, two 6AN PTFE lines, 5\/16in EVAP line and hose ends, spring clamps, hex head flanged screws, stainless hardware, SAE disconnect tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount only\u003c\/strong\u003e: powder coated heat shield bracket, 2pc billet filter mount, hex head flanged screws, stainless hardware\u003c\/li\u003e\n\u003cli\u003eNOT included on the mount-only option: fuel filter, hoses, and fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015-2023 S550 Ford Mustang, all trims\u003c\/li\u003e\n\u003cli\u003e2024 and newer S650 Ford Mustang, all trims\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNOT compatible with RHD Mustangs\u003c\/li\u003e\n\u003cli\u003eOn manual transmission cars, the 2-bolt flange clutch line bracket needs to be moved slightly to clear the fuel filter inlet fitting\u003c\/li\u003e\n\u003cli\u003eDesigned for cars running an aftermarket fuel pump hanger, which removes the OEM post-pump filter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Complete Kit, Stainless Filter (20-1819-03)","offer_id":43700777222211,"sku":"20-1819-03","price":398.95,"currency_code":"USD","in_stock":true},{"title":"Complete Kit, Microglass Filter (20-1819-05)","offer_id":43700777254979,"sku":"20-1819-05","price":379.95,"currency_code":"USD","in_stock":true},{"title":"Mount Only, No Filter (20-1829)","offer_id":43700777287747,"sku":"20-1829","price":151.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/20-1819-xx_1200px_wide.jpg?v=1787355017","url":"https:\/\/www.tunedbyshawn.com\/products\/radium-fuel-filter-kit-2015-ford-mustang-s550-s650-20-1819-03-20-1819-05-20-1829","provider":"Tuned by Shawn","version":"1.0","type":"link"}