{"product_id":"radium-engineering-fuel-surge-tank-install-kit-2008-2015-mitsubishi-evolution-x-20-0113","title":"Radium Engineering Fuel Surge Tank Install Kit | 2008-2015 Mitsubishi Evolution X (20-0113)","description":"\u003cp\u003e\u003cstrong\u003eA surge tank belongs in a collision-safe spot with clean wiring and purpose-cut lines, not wherever it happened to fit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Surge Tank Install Kit\u003c\/strong\u003e for the Evo X packages the entire installation: a powder coated aluminum bracket that locates a Radium single pump FST centered behind the rear seat, in front of the trunk's plastic paneling, secured to OEM mounting bosses with no drilling or cutting. Four preassembled cut-to-length 6AN PTFE hoses handle the plumbing, and the wiring components arrive with flying leads, Raychem solderless butt splices, and a weatherproof fuse and relay. The panel goes back on afterward, so you keep 100 percent of usable trunk space. FST and pump sold separately.\u003c\/p\u003e\n\u003ch3\u003eWhat You'll Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA surge tank tucked into a collision-safe location that costs you zero trunk space\u003c\/li\u003e\n\u003cli\u003eNo fuel smell in the cabin, since the PTFE hoses are non-permeable unlike rubber\u003c\/li\u003e\n\u003cli\u003eWiring done in under 30 minutes with no soldering, thanks to solderless splices and the included relay and fuse\u003c\/li\u003e\n\u003cli\u003eBattery and washer bottle staying exactly where Mitsubishi put them\u003c\/li\u003e\n\u003cli\u003eLines that fit the chassis precisely, because they were cut to length for this application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLocates the FST centered behind the rear seat, in front of the trunk's plastic paneling, in a collision-safe area\u003c\/li\u003e\n\u003cli\u003ePowder coated aluminum bracket secures to OEM mounting bosses; no drilling or cutting\u003c\/li\u003e\n\u003cli\u003e4x preassembled 6AN (3\/8\") PTFE hoses, cut to length for the Evo X, with anodized aluminum hose ends, stainless inner braid, and abrasion-resistant black PVC cover\u003c\/li\u003e\n\u003cli\u003eWiring components with flying leads, Raychem solderless butt splices, weatherproof fuse, and relay\u003c\/li\u003e\n\u003cli\u003eAN and OEM style adapter fittings with stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eCompatible with Radium single pump FSTs using a 39mm pump or Bosch 044; OEM battery and washer reservoir retained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Details\u003c\/h3\u003e\n\u003cp\u003ePlacement drove this kit's design. The spot behind the rear seat sits inside the car's protected structure, away from crush zones, heat, and suspension, and because the factory trim panel reinstalls over the finished assembly, the install is invisible in daily use. The four PTFE hoses cover the surge tank loop: lift supply in, feed out toward the engine, regulator return, and overflow back to the tank, each preassembled so there is no hose-end building on your garage floor. Electrically, the flying-lead harness with its weatherproof relay and fuse drives the FST's internal pump, and the solderless Raychem splices make the connections crimp-and-heat simple. Two compatibility gates to check before ordering: this kit was not designed for the Radium MPFST, and it does not fit RHD Evo X models with the large OEM windshield washer reservoir, so check your reservoir first. The FST itself and its fuel pump are sold separately, letting you pick the pump configuration your power goal needs.\u003c\/p\u003e\n\u003ch3\u003eKit Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4x Preassembled 6AN PTFE hoses, cut to length\u003c\/li\u003e\n\u003cli\u003e1x Powder coated aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN and OEM style adapter fittings\u003c\/li\u003e\n\u003cli\u003eWiring components with flying leads, Raychem splices, weatherproof fuse, and relay\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli\u003eFST and fuel pump NOT included, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Lancer Evolution X\u003c\/li\u003e\n\u003cli\u003eRadium single pump FSTs with 39mm pumps (Walbro, AEM, Aeromotive, Deatschwerks) or Bosch 044\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Radium MPFST; not compatible with RHD models using the large OEM washer reservoir\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":43672691638339,"sku":"20-0113","price":351.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/radium-engineering-rad-20-0113-28377483575366_477560f5-ffd1-4d60-8a8c-ec87b65f7082.png?v=1786717080","url":"https:\/\/www.tunedbyshawn.com\/products\/radium-engineering-fuel-surge-tank-install-kit-2008-2015-mitsubishi-evolution-x-20-0113","provider":"Tuned by Shawn","version":"1.0","type":"link"}