{"product_id":"radium-engineering-6an-universal-diy-ptfe-hose-kit-black-universal-20-0638","title":"Radium Engineering 6AN Universal DIY PTFE Hose Kit - Black | Universal (20-1206)","description":"\u003cp\u003e\u003cstrong\u003eRubber fuel hose sweats vapor, ages out, and hates ethanol; PTFE does none of those things.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilding custom fuel lines means choosing hose you will not have to think about again. The \u003cstrong\u003eRadium Engineering 6AN Universal DIY PTFE Hose Kit\u003c\/strong\u003e pairs carbon-lined PTFE hose in a black polyester braid with matched black anodized hose ends, cut and assembled to your car's exact routing. The extruded fluoropolymer core is wrapped in stainless wire braid, pressure tested to 1200 psi, and chemically inert against methanol, ethanol, E85, race fuel, brake fluid, and more. Near-zero permeation means no fuel smell in the cabin, ever.\u003c\/p\u003e\n\u003ch3\u003eWhat You'll Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNo fuel odor creeping into the cabin, since PTFE has near-zero permeation unlike rubber hose\u003c\/li\u003e\n\u003cli\u003eLines that fit your chassis exactly, because you cut them to length\u003c\/li\u003e\n\u003cli\u003eConfidence running E85, methanol, or race gas without hose degradation on the clock\u003c\/li\u003e\n\u003cli\u003eEasier assembly than expected, with internal O-rings letting the hose ends swivel during installation\u003c\/li\u003e\n\u003cli\u003eStatic protection in high-flow fueling from the carbon-lined core\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon-lined PTFE core dissipates static charge buildup in high-flow fuel systems\u003c\/li\u003e\n\u003cli\u003eExtruded fluoropolymer core wrapped in stainless wire braid with black braided polyester outer finish\u003c\/li\u003e\n\u003cli\u003ePressure tested to 1200 psi and tolerant of extreme cold through high heat\u003c\/li\u003e\n\u003cli\u003eResistant to methanol, ethanol, E85, race fuel, brake fluid, power steering fluid, coolant, and transmission fluid\u003c\/li\u003e\n\u003cli\u003eBlack anodized aluminum PTFE-specific hose ends with internal O-rings for easy swiveling during install\u003c\/li\u003e\n\u003cli\u003eHose supplied in a length suitable for most custom applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Details\u003c\/h3\u003e\n\u003cp\u003ePTFE earns its place at the top of the hose hierarchy on chemistry alone: the fluoropolymer core simply does not react with fuels, including the alcohol blends that swell and harden rubber lines over time, and it will not release vapors, which is what makes it the right choice for lines routed through tight or enclosed areas like a cabin or trunk. The carbon lining matters more as flow rates climb, since fast-moving fuel through an insulating hose can build static charge, and the conductive lining bleeds it off. Assembly is the DIY part: measure each run on the car, cut the hose cleanly, and build the joints with the included PTFE-specific hose ends, which thread together around the captured core and seal on internal O-rings that also let the end swivel while you clock the fitting. One rule to respect: these ends are made specifically for PTFE hose and cannot be used with rubber hose, and vice versa. Additional Radium hose ends in straight, 45-degree, and 90-degree configurations are sold separately if your routing needs more bends than the kit provides.\u003c\/p\u003e\n\u003ch3\u003eKit Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon-lined 6AN PTFE hose, black polyester braid, in a length suitable for most custom applications\u003c\/li\u003e\n\u003cli\u003eBlack anodized aluminum 6AN PTFE hose ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal: custom 6AN fuel, oil, coolant, power steering, and transmission fluid lines\u003c\/li\u003e\n\u003cli\u003eAll fuel types including methanol, ethanol, E85, and leaded race fuels\u003c\/li\u003e\n\u003cli\u003eHose ends compatible with PTFE hose only, not rubber hose\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":43672691408963,"sku":"20-1206","price":137.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/20-1210_528d66aa-bef3-4bb8-9d08-e17fb01f2663.webp?v=1786717076","url":"https:\/\/www.tunedbyshawn.com\/products\/radium-engineering-6an-universal-diy-ptfe-hose-kit-black-universal-20-0638","provider":"Tuned by Shawn","version":"1.0","type":"link"}