{"product_id":"id2600-xds-fuel-injectors-single-injector-60mm-11mm-adapter-top-14mm-lower-o-ring-2600-60-11-14","title":"Injector Dynamics ID2600-XDS Fuel Injectors | Single Injector | 60mm, 11mm Adapter Top, 14mm Lower O-Ring (2600.60.11.14)","description":"\u003cp\u003e\u003cstrong\u003eChasing lean spikes at high boost? Your injectors are the weak link.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOnce boost and ethanol enter the picture, factory injectors become the first hard ceiling in the whole combination. The \u003cstrong\u003eID2600-XDS\u003c\/strong\u003e answers that with 2600cc\/min of flow at 3.0 bar, compatibility with methanol, ethanol, and all known hydrocarbon fuels, delivered as a single injector in the 60mm body, 11mm adapter top, 14mm lower o-ring configuration. It is backed by full characterization data, so your ECU gets real numbers, not estimates. It is the boring, repeatable fueling every serious build needs.\u003c\/p\u003e \u003ch3\u003eWhat You'll Feel\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeadroom to grow the build without touching the fuel system again\u003c\/li\u003e\n\u003cli\u003eCylinder-to-cylinder consistency you can see in your lambda and EGT logs\u003c\/li\u003e\n\u003cli\u003eFuel trims that stay put season to season instead of drifting with the weather\u003c\/li\u003e\n\u003cli\u003eStock-like idle and clean cold starts, even at this injector size\u003c\/li\u003e\n\u003cli\u003eConfidence to run ethanol daily without worrying what it is doing to your injectors\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNominal flow rate: 2600cc\/min at 3.0 bar (43.5 psi)\u003c\/li\u003e\n\u003cli\u003eMaximum differential fuel pressure: 9.0 bar (130.5 psi), requires a minimum of 11 volts\u003c\/li\u003e\n\u003cli\u003eCompatible with methanol, ethanol, and all known hydrocarbon fuels\u003c\/li\u003e\n\u003cli\u003eNot compatible with ethers (MTBE, ETBE, TAME) or nitromethane\u003c\/li\u003e\n\u003cli\u003eUSCAR electrical connector\u003c\/li\u003e\n\u003cli\u003eConfiguration: 60mm body, 11mm adapter top, 14mm lower o-ring\u003c\/li\u003e\n\u003cli\u003eSold individually, so you can replace one injector or build a set for an uncommon cylinder count\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eThe Details\u003c\/h3\u003e\u003cp\u003eThe ID2600-XDS is the highest flow injector Bosch offers and flows 50 percent more than the ID1700x. It was developed specifically for liquid fuels, with corrosion resistant internals for long term ethanol and methanol use. Dual Slope Matching is the difference maker here: matched on static flow alone, injectors this size deviate around plus or minus 5.1 percent at low pulse widths, while Dual Slope Matching brings that down to plus or minus 1.4 percent. One thing to know going in: it needs a minimum of 11 volts and is not compatible with ethers like MTBE or with nitromethane. Injector Dynamics publishes  full characterization data, including slope, offset (dead time) versus voltage and pressure, and short pulse width behavior, so your tuner can load real numbers instead of chasing fuel trims across the map. Accurate dead times are what make large injectors behave at idle and cruise, and they are the reason these tune quickly and stay tuned. This configuration uses machined top adapters (already fitted) to suit the rail height listed above. If your harness does not have USCAR plugs, plug and play connector adapters are available separately, no cutting or soldering required.\u003c\/p\u003e \u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUSCAR Connector, 60mm length, 11 mm (blue) adapter top, 14mm lower o-ring.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eKit Includes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 - ID2600-XDS Fuel Injector\u003c\/li\u003e\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUniversal: 60mm body, 11mm adapter top, 14mm lower o-ring, USCAR connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":67645666689091,"sku":"2600.60.11.14","price":398.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/id2600-xds-2600-60-11-14.jpg?v=1791383981","url":"https:\/\/www.tunedbyshawn.com\/products\/id2600-xds-fuel-injectors-single-injector-60mm-11mm-adapter-top-14mm-lower-o-ring-2600-60-11-14","provider":"Tuned by Shawn","version":"1.0","type":"link"}