{"product_id":"id2600-xds-fuel-injectors-set-of-8-multiple-fitments-2600-48-14-14-8","title":"Injector Dynamics ID2600-XDS Fuel Injectors | Set of 8 | Multiple Fitments (2600.48.14.14.8)","description":"\u003cp\u003e\u003cstrong\u003eMaxed-out injectors turn every dyno pull into a gamble.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOnce boost and ethanol enter the picture, factory injectors become the first hard ceiling in the whole combination. The \u003cstrong\u003eID2600-XDS\u003c\/strong\u003e answers that with 2600cc\/min of flow at 3.0 bar, compatibility with methanol, ethanol, and all known hydrocarbon fuels, delivered as a matched set of 8. Each set is flow matched using Dual Slope Matching and backed by full characterization data, so your ECU gets real numbers, not estimates. Matched hardware and real data, nothing left to guess at.\u003c\/p\u003e \u003ch3\u003eWhat You'll Feel\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCrisp part-throttle response instead of the surge and stumble big injectors are known for\u003c\/li\u003e\n\u003cli\u003eStock-like idle and clean cold starts, even at this injector size\u003c\/li\u003e\n\u003cli\u003eConfidence to run ethanol daily without worrying what it is doing to your injectors\u003c\/li\u003e\n\u003cli\u003eSteady AFRs when boost climbs, no lean spikes at the top of the pull\u003c\/li\u003e\n\u003cli\u003eCylinder-to-cylinder consistency you can see in your lambda and EGT logs\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNominal flow rate: 2600cc\/min at 3.0 bar (43.5 psi)\u003c\/li\u003e\n\u003cli\u003eMaximum differential fuel pressure: 9.0 bar (130.5 psi), requires a minimum of 11 volts\u003c\/li\u003e\n\u003cli\u003eCompatible with methanol, ethanol, and all known hydrocarbon fuels\u003c\/li\u003e\n\u003cli\u003eNot compatible with ethers (MTBE, ETBE, TAME) or nitromethane\u003c\/li\u003e\n\u003cli\u003eUSCAR electrical connector\u003c\/li\u003e\n\u003cli\u003eConfiguration: 48mm body, 14mm adapter top, 14mm lower o-ring\u003c\/li\u003e\n\u003cli\u003eSupplied as a flow-matched set with Dual Slope Matching for consistent delivery at low pulse widths\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eThe Details\u003c\/h3\u003e\u003cp\u003eThe ID2600-XDS is the biggest injector to come out of the Injector Dynamics and Bosch Motorsport partnership, developed specifically for liquid fuels with corrosion resistant internals for long term ethanol and methanol use. Dual Slope Matching is the difference maker here: matched on static flow alone, injectors this size deviate around plus or minus 5.1 percent at low pulse widths, while Dual Slope Matching brings that down to plus or minus 1.4 percent. One thing to know going in: it needs a minimum of 11 volts and is not compatible with ethers like MTBE or with nitromethane. Every set ships flow matched, and Injector Dynamics publishes full characterization data, including slope, offset (dead time) versus voltage and pressure, and short pulse width behavior, so your tuner can load real numbers instead of chasing fuel trims across the map. Accurate dead times are what make large injectors behave at idle and cruise, and they are the reason these tune quickly and stay tuned. This configuration uses machined top adapters (already fitted) to suit the rail height listed above. If your harness does not have USCAR plugs, plug and play connector adapters are available separately, no cutting or soldering required.\u003c\/p\u003e \u003ch3\u003eKit Includes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 - Set of ID2600-XDS Injectors\u003c\/li\u003e\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2007-2013 BMW E90\/E92\/E93 M3\u003c\/li\u003e\n\u003cli\u003e2015-2019 Dodge Challenger SRT Hellcat\u003c\/li\u003e\n\u003cli\u003e2015-2019 Dodge Charger SRT Hellcat\u003c\/li\u003e\n\u003cli\u003e2007-2014 Ford Shelby Mustang GT500\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":43625775759427,"sku":"IDY 2600.48.14.14.8","price":3187.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/injector-dynamics-idy-2600-48-14-14-8-13454663909446.jpg?v=1785794093","url":"https:\/\/www.tunedbyshawn.com\/products\/id2600-xds-fuel-injectors-set-of-8-multiple-fitments-2600-48-14-14-8","provider":"Tuned by Shawn","version":"1.0","type":"link"}