{"product_id":"id2600-xds-fuel-injectors-set-of-8-60mm-11mm-adapter-top-denso-lower-2600-60-11-d-8","title":"Injector Dynamics ID2600-XDS Fuel Injectors | Set of 8 | 60mm, 11mm Adapter Top, Denso Lower (2600.60.11.D.8)","description":"\u003cp\u003e\u003cstrong\u003eYour tuner should be tuning the engine, not fighting the injectors.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eUndersized injectors force high duty cycles, hot injector bodies, and fueling that gets less predictable exactly when you need it most. The \u003cstrong\u003eID2600-XDS\u003c\/strong\u003e answers that with 2600cc\/min of flow at 3.0 bar, compatibility with methanol, ethanol, and all known hydrocarbon fuels, delivered as a matched set of 8 for your 60mm, 11mm Adapter Top, Denso Lower. Each set is flow matched using Dual Slope Matching and backed by full characterization data, so your ECU gets real numbers, not estimates. No drama, just fuel where and when the tune asks for it.\u003c\/p\u003e \u003ch3\u003eWhat You'll Feel\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel trims that stay put season to season instead of drifting with the weather\u003c\/li\u003e\n\u003cli\u003eConfidence to run ethanol daily without worrying what it is doing to your injectors\u003c\/li\u003e\n\u003cli\u003eCrisp part-throttle response instead of the surge and stumble big injectors are known for\u003c\/li\u003e\n\u003cli\u003eHeadroom to grow the build without touching the fuel system again\u003c\/li\u003e\n\u003cli\u003eStock-like idle and clean cold starts, even at this injector size\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNominal flow rate: 2600cc\/min at 3.0 bar (43.5 psi)\u003c\/li\u003e\n\u003cli\u003eMaximum differential fuel pressure: 9.0 bar (130.5 psi), requires a minimum of 11 volts\u003c\/li\u003e\n\u003cli\u003eCompatible with methanol, ethanol, and all known hydrocarbon fuels\u003c\/li\u003e\n\u003cli\u003eNot compatible with ethers (MTBE, ETBE, TAME) or nitromethane\u003c\/li\u003e\n\u003cli\u003eUSCAR electrical connector\u003c\/li\u003e\n\u003cli\u003eConfiguration: 60mm body, 11mm adapter top, Denso lower cushion\u003c\/li\u003e\n\u003cli\u003eSupplied as a flow-matched set with Dual Slope Matching for consistent delivery at low pulse widths\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eThe Details\u003c\/h3\u003e\u003cp\u003eThe ID2600-XDS is the biggest injector to come out of the Injector Dynamics and Bosch Motorsport partnership, developed specifically for liquid fuels with corrosion resistant internals for long term ethanol and methanol use. Dual Slope Matching is the difference maker here: matched on static flow alone, injectors this size deviate around plus or minus 5.1 percent at low pulse widths, while Dual Slope Matching brings that down to plus or minus 1.4 percent. One thing to know going in: it needs a minimum of 11 volts and is not compatible with ethers like MTBE or with nitromethane. Every set ships flow matched, and Injector Dynamics publishes full characterization data, including slope, offset (dead time) versus voltage and pressure, and short pulse width behavior, so your tuner can load real numbers instead of chasing fuel trims across the map. Accurate dead times are what make large injectors behave at idle and cruise, and they are the reason these tune quickly and stay tuned. This configuration uses machined top adapters (already fitted) to suit the rail height listed above. The Denso lower cushion seats these in Denso-style manifold bores. If your harness does not have USCAR plugs, plug and play connector adapters are available separately, no cutting or soldering required.\u003c\/p\u003e \u003ch3\u003eKit Includes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x set of 8 ID2600-XDS fuel injectors\u003c\/li\u003e\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUniversal, 60mm body, 11mm adapter top, Denso lower cushion, USCAR connector\u003c\/li\u003e\n\u003cli\u003e[SPEC: CONFIRMED VEHICLE APPLICATIONS]\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":43625775136835,"sku":"IDY 2600.60.11.D.8","price":3187.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/injector-dynamics-idy-2600-60-11-d-8-29460805845062.jpg?v=1785794072","url":"https:\/\/www.tunedbyshawn.com\/products\/id2600-xds-fuel-injectors-set-of-8-60mm-11mm-adapter-top-denso-lower-2600-60-11-d-8","provider":"Tuned by Shawn","version":"1.0","type":"link"}