{"product_id":"id2600-xds-fuel-injectors-set-of-4-1990-2005-mazda-mx-5-miata-2600-11-02-60-11-4-pu","title":"Injector Dynamics ID2600-XDS Fuel Injectors | Set of 4 | 1990-2005 Mazda MX-5 Miata (2600.11.02.60.11.4-PU)","description":"\u003cp\u003e\u003cstrong\u003eIf your fuel trims drift every time the weather changes, your injector data is guessing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOnce boost and ethanol enter the picture, factory injectors become the first hard ceiling in the whole combination. The \u003cstrong\u003eID2600-XDS\u003c\/strong\u003e answers that with 2600cc\/min of flow at 3.0 bar, compatibility with methanol, ethanol, and all known hydrocarbon fuels, delivered as a matched set of 4 for your 1990-2005 Mazda MX-5 Miata. Each set is flow matched using Dual Slope Matching and backed by full characterization data, so your ECU gets real numbers, not estimates. Sized right, characterized right, tuned right.\u003c\/p\u003e \u003ch3\u003eWhat You'll Feel\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFaster dyno sessions, because accurate injector data means less time chasing fuel trims\u003c\/li\u003e\n\u003cli\u003eConfidence to run ethanol daily without worrying what it is doing to your injectors\u003c\/li\u003e\n\u003cli\u003eFuel trims that stay put season to season instead of drifting with the weather\u003c\/li\u003e\n\u003cli\u003eStock-like idle and clean cold starts, even at this injector size\u003c\/li\u003e\n\u003cli\u003eHeadroom to grow the build without touching the fuel system again\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNominal flow rate: 2600cc\/min at 3.0 bar (43.5 psi)\u003c\/li\u003e\n\u003cli\u003eMaximum differential fuel pressure: 9.0 bar (130.5 psi), requires a minimum of 11 volts\u003c\/li\u003e\n\u003cli\u003eCompatible with methanol, ethanol, and all known hydrocarbon fuels\u003c\/li\u003e\n\u003cli\u003eNot compatible with ethers (MTBE, ETBE, TAME) or nitromethane\u003c\/li\u003e\n\u003cli\u003eUSCAR electrical connector, supplied with potted plug and play wiring adapters\u003c\/li\u003e\n\u003cli\u003eConfiguration: 60mm body, 11mm top, application-specific lower fitment\u003c\/li\u003e\n\u003cli\u003eSupplied as a flow-matched set with Dual Slope Matching for consistent delivery at low pulse widths\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eThe Details\u003c\/h3\u003e\u003cp\u003eThe ID2600-XDS is the highest flow injector Bosch offers and flows 50 percent more than the ID1700x. It was developed specifically for liquid fuels, with corrosion resistant internals for long term ethanol and methanol use. Dual Slope Matching is the difference maker here: matched on static flow alone, injectors this size deviate around plus or minus 5.1 percent at low pulse widths, while Dual Slope Matching brings that down to plus or minus 1.4 percent. One thing to know going in: it needs a minimum of 11 volts and is not compatible with ethers like MTBE or with nitromethane. Every set ships flow matched, and Injector Dynamics publishes  full characterization data, including slope, offset (dead time) versus voltage and pressure, and short pulse width behavior, so your tuner can load real numbers instead of chasing fuel trims across the map. Accurate dead times are what make large injectors behave at idle and cruise, and they are the reason these tune quickly and stay tuned. This is an application-specific part number with machined fitment hardware, so it drops in without guessing at adapters. Potted plug and play wiring adapters are included, because a standard connector will not clear the cylinder head on this application.\u003c\/p\u003e \u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMazda Miata 90-05: 90-05 Miata, 1.6L \/ 1.8L, 11mm (blue) adapters, -204 lower cushions (remove lower o-ring retainer).\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eKit Includes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 Set of 4 - ID2600-XDS Fuel Injectors\u003c\/li\u003e\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1990-2005 Mazda MX-5 Miata - Miata 90-05\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":67645681270851,"sku":"2600.11.02.60.11.4-PU","price":1649.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/id2600-xds-2600-11-02-60-11-4-pu.jpg?v=1791384032","url":"https:\/\/www.tunedbyshawn.com\/products\/id2600-xds-fuel-injectors-set-of-4-1990-2005-mazda-mx-5-miata-2600-11-02-60-11-4-pu","provider":"Tuned by Shawn","version":"1.0","type":"link"}