{"product_id":"id2600-xds-fuel-injectors-set-of-3-multiple-can-am-fitments-2600-34-14-14-3","title":"Injector Dynamics ID2600-XDS Fuel Injectors | Set of 3 | Multiple Can-Am Fitments (2600.34.14.14.3)","description":"\u003cp\u003e\u003cstrong\u003eIf your fuel trims drift every time the weather changes, your injector data is guessing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOnce boost and ethanol enter the picture, factory injectors become the first hard ceiling in the whole combination. The \u003cstrong\u003eID2600-XDS\u003c\/strong\u003e answers that with 2600cc\/min of flow at 3.0 bar, compatibility with methanol, ethanol, and all known hydrocarbon fuels, delivered as a matched set of 3. Each set is flow matched using Dual Slope Matching and backed by full characterization data, so your ECU gets real numbers, not estimates. It is the boring, repeatable fueling every serious build needs.\u003c\/p\u003e \u003ch3\u003eWhat You'll Feel\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFaster dyno sessions, because accurate injector data means less time chasing fuel trims\u003c\/li\u003e\n\u003cli\u003eCylinder-to-cylinder consistency you can see in your lambda and EGT logs\u003c\/li\u003e\n\u003cli\u003eSteady AFRs when boost climbs, no lean spikes at the top of the pull\u003c\/li\u003e\n\u003cli\u003eHeadroom to grow the build without touching the fuel system again\u003c\/li\u003e\n\u003cli\u003eStock-like idle and clean cold starts, even at this injector size\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNominal flow rate: 2600cc\/min at 3.0 bar (43.5 psi)\u003c\/li\u003e\n\u003cli\u003eMaximum differential fuel pressure: 9.0 bar (130.5 psi), requires a minimum of 11 volts\u003c\/li\u003e\n\u003cli\u003eCompatible with methanol, ethanol, and all known hydrocarbon fuels\u003c\/li\u003e\n\u003cli\u003eNot compatible with ethers (MTBE, ETBE, TAME) or nitromethane\u003c\/li\u003e\n\u003cli\u003eUSCAR electrical connector\u003c\/li\u003e\n\u003cli\u003eConfiguration: 34mm body, 14mm top (no adapter), 14mm lower o-ring\u003c\/li\u003e\n\u003cli\u003eSupplied as a flow-matched set with Dual Slope Matching for consistent delivery at low pulse widths\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eThe Details\u003c\/h3\u003e\u003cp\u003eThe ID2600-XDS is the highest flow injector Bosch offers and flows 50 percent more than the ID1700x. It was developed specifically for liquid fuels, with corrosion resistant internals for long term ethanol and methanol use. Dual Slope Matching is the difference maker here: matched on static flow alone, injectors this size deviate around plus or minus 5.1 percent at low pulse widths, while Dual Slope Matching brings that down to plus or minus 1.4 percent. One thing to know going in: it needs a minimum of 11 volts and is not compatible with ethers like MTBE or with nitromethane. Every set ships flow matched, and Injector Dynamics publishes  full characterization data, including slope, offset (dead time) versus voltage and pressure, and short pulse width behavior, so your tuner can load real numbers instead of chasing fuel trims across the map. Accurate dead times are what make large injectors behave at idle and cruise, and they are the reason these tune quickly and stay tuned. This is the short 34mm body with no top adapter, a direct fit where the rail was designed for short injectors. If your harness does not have USCAR plugs, plug and play connector adapters are available separately, no cutting or soldering required.\u003c\/p\u003e \u003ch3\u003eKit Includes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 Set of 3 - ID2600-XDS Fuel Injectors\u003c\/li\u003e\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCan-Am Maverick X3 2017\u003c\/li\u003e\n\u003cli\u003eCan-Am Maverick X3 Max 2017\u003c\/li\u003e\n\u003cli\u003eCan-Am Maverick X3 Turbo 2018+\u003c\/li\u003e\n\u003cli\u003eCan-Am Maverick X3 Turbo R 2018+\u003c\/li\u003e\n\u003cli\u003eCan-Am Maverick X3 Turbo RR 2020+\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":67645671047235,"sku":"2600.34.14.14.3","price":1188.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/id2600-xds-2600-34-14-14-3.jpg?v=1791383993","url":"https:\/\/www.tunedbyshawn.com\/products\/id2600-xds-fuel-injectors-set-of-3-multiple-can-am-fitments-2600-34-14-14-3","provider":"Tuned by Shawn","version":"1.0","type":"link"}