{"product_id":"id1750-xds-fuel-injectors-set-of-4-kawasaki-teryx-h2-1750-10-03-34-11-4","title":"Injector Dynamics ID1750-XDS Fuel Injectors | Set of 4 | Kawasaki Teryx H2 (1750.10.03.34.11.4)","description":"\u003cp\u003e\u003cstrong\u003eMaxed-out injectors turn every dyno pull into a gamble.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOnce boost and ethanol enter the picture, factory injectors become the first hard ceiling in the whole combination. The \u003cstrong\u003eID1750-XDS\u003c\/strong\u003e answers that with 1728cc\/min of flow at 3.0 bar, compatibility with methanol, ethanol, and all known hydrocarbon fuels, delivered as a matched set of 4 for your Kawasaki Teryx H2. Each set is flow matched using Dual Slope Matching and backed by full characterization data, so your ECU gets real numbers, not estimates. This is what consistent fueling actually looks like.\u003c\/p\u003e \u003ch3\u003eWhat You'll Feel\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCrisp part-throttle response instead of the surge and stumble big injectors are known for\u003c\/li\u003e\n\u003cli\u003eFaster dyno sessions, because accurate injector data means less time chasing fuel trims\u003c\/li\u003e\n\u003cli\u003eCylinder-to-cylinder consistency you can see in your lambda and EGT logs\u003c\/li\u003e\n\u003cli\u003eStock-like idle and clean cold starts, even at this injector size\u003c\/li\u003e\n\u003cli\u003eSteady AFRs when boost climbs, no lean spikes at the top of the pull\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNominal flow rate: 1728cc\/min at 3.0 bar (43.5 psi), measured with E10 emissions certification fuel at 49 degrees C (120 degrees F)\u003c\/li\u003e\n\u003cli\u003eMaximum differential fuel pressure: 7.0 bar (101.5 psi)\u003c\/li\u003e\n\u003cli\u003eCompatible with methanol, ethanol, MTBE, nitromethane, and all known hydrocarbon fuels\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant construction for long service life on alcohol fuels\u003c\/li\u003e\n\u003cli\u003eUSCAR electrical connector\u003c\/li\u003e\n\u003cli\u003eConfiguration: 34mm body, 11mm top, application-specific lower fitment\u003c\/li\u003e\n\u003cli\u003eSupplied as a flow-matched set with Dual Slope Matching for consistent delivery at low pulse widths\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eThe Details\u003c\/h3\u003e\u003cp\u003eThe ID1750-XDS is the successor to the ID1700x. It adds a higher dynamic flow rate with no increase in minimum fuel mass, better cylinder-to-cylinder balance at low pulse widths, and improved pressure sensitivity, while keeping the \"compatible with everything but dirt\" corrosion resistance the 1700 was known for. It sits between the 1300 and 2600 in the XDS lineup, sized for serious ethanol and methanol builds that have outgrown the 1300 class. Every set ships flow matched, and Injector Dynamics publishes  full characterization data, including slope, offset (dead time) versus voltage and pressure, and short pulse width behavior, so your tuner can load real numbers instead of chasing fuel trims across the map. Accurate dead times are what make large injectors behave at idle and cruise, and they are the reason these tune quickly and stay tuned. This is an application-specific part number with machined fitment hardware, so it drops in without guessing at adapters. If your harness does not have USCAR plugs, plug and play connector adapters are available separately, no cutting or soldering required.\u003c\/p\u003e \u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKawasaki Teryx H2: Teryx H2 2026+, 11mm machined top with support ring ABOVE (1) 11mm o-ring. Denso lower cushions.  Includes plug and play connectors.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eKit Includes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 Set of 4 - ID1750-XDS Fuel Injectors\u003c\/li\u003e\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKawasaki Teryx H2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":67645648502851,"sku":"1750.10.03.34.11.4","price":1400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/id1750-xds-injectors_2f5f8ef6-a86c-40ae-9256-026f0111718e.jpg?v=1791384186","url":"https:\/\/www.tunedbyshawn.com\/products\/id1750-xds-fuel-injectors-set-of-4-kawasaki-teryx-h2-1750-10-03-34-11-4","provider":"Tuned by Shawn","version":"1.0","type":"link"}