{"product_id":"id1050-xds-fuel-injectors-set-of-6-60mm-14mm-adapter-top-denso-lower-1050-60-14-d-6","title":"Injector Dynamics ID1050-XDS Fuel Injectors | Set of 6 | 60mm, 14mm Adapter Top, Denso Lower (1050.60.14.D.6)","description":"\u003cp\u003e\u003cstrong\u003eYour tuner should be tuning the engine, not fighting the injectors.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eA factory fuel system that was sized for stock power runs out of injector long before a built engine runs out of airflow, and 60mm, 14mm Adapter Top, Denso Lower builds hit that wall early. The \u003cstrong\u003eID1050-XDS\u003c\/strong\u003e (the current evolution of the ID1050x) answers that with 1065cc\/min of flow at 3.0 bar, compatibility with all known fuels including E85, delivered as a matched set of 6 for your 60mm, 14mm Adapter Top, Denso Lower. Each set is flow matched using Dual Slope Matching and backed by full characterization data, so your ECU gets real numbers, not estimates. Fueling you can build a tune on.\u003c\/p\u003e \u003ch3\u003eWhat You'll Feel\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStock-like idle and clean cold starts, even at this injector size\u003c\/li\u003e\n\u003cli\u003eSteady AFRs when boost climbs, no lean spikes at the top of the pull\u003c\/li\u003e\n\u003cli\u003eCylinder-to-cylinder consistency you can see in your lambda and EGT logs\u003c\/li\u003e\n\u003cli\u003eFuel trims that stay put season to season instead of drifting with the weather\u003c\/li\u003e\n\u003cli\u003eCrisp part-throttle response instead of the surge and stumble big injectors are known for\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNominal flow rate: 1065cc\/min at 3.0 bar (43.5 psi), measured with gasoline at 52 degrees C\u003c\/li\u003e\n\u003cli\u003eMaximum differential fuel pressure: 10.0 bar (145.0 psi)\u003c\/li\u003e\n\u003cli\u003eCompatible with all known fuels, including gasoline, E85, and ethanol blends\u003c\/li\u003e\n\u003cli\u003eUSCAR electrical connector\u003c\/li\u003e\n\u003cli\u003eConfiguration: 60mm body, 14mm adapter top, Denso lower cushion\u003c\/li\u003e\n\u003cli\u003eSupplied as a flow-matched set with Dual Slope Matching for consistent delivery at low pulse widths\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals for extended service life on ethanol and other corrosive fuels\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eThe Details\u003c\/h3\u003e\u003cp\u003eThe ID1050-XDS is the current evolution of the ID1050x, built to spec with Bosch Motorsport rather than modified from a production part. Dual Slope Matching matches flow in both the linear and nonlinear range, so cylinder-to-cylinder delivery stays consistent even at the short pulse widths where big injectors usually get ugly. Every set ships flow matched, and Injector Dynamics publishes full characterization data, including slope, offset (dead time) versus voltage and pressure, and short pulse width behavior, so your tuner can load real numbers instead of chasing fuel trims across the map. Accurate dead times are what make large injectors behave at idle and cruise, and they are the reason these tune quickly and stay tuned. This configuration uses machined top adapters (already fitted) to suit the rail height listed above. The Denso lower cushion seats these in Denso-style manifold bores. If your harness does not have USCAR plugs, plug and play connector adapters are available separately, no cutting or soldering required.\u003c\/p\u003e \u003ch3\u003eKit Includes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x set of 6 ID1050-XDS fuel injectors\u003c\/li\u003e\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUniversal, 60mm body, 14mm adapter top, Denso lower cushion, USCAR connector\u003c\/li\u003e\n\u003cli\u003e[SPEC: CONFIRMED VEHICLE APPLICATIONS]\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":43625768222787,"sku":"IDY 1050.60.14.D.6","price":900.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/injector-dynamics-idy-1050-60-14-d-6-29460810956870.jpg?v=1785793957","url":"https:\/\/www.tunedbyshawn.com\/products\/id1050-xds-fuel-injectors-set-of-6-60mm-14mm-adapter-top-denso-lower-1050-60-14-d-6","provider":"Tuned by Shawn","version":"1.0","type":"link"}