{"product_id":"deatschwerks-dw810-brushless-pump-install-kit-universal-9-1002","title":"DeatschWerks DW810 Brushless Pump Install Kit | Universal (9-1002)","description":"\u003cp\u003e\u003cstrong\u003eThe pump is the easy part. Sealing, wiring, and filtering it inside a tank you have already cut into is where in-tank installs go wrong.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eDeatschWerks DW810 Universal Install Kit\u003c\/strong\u003e is the hardware half of a DW810 install, sold on its own: the 4-wire bulkhead that carries power through the tank wall, the pump-to-bulkhead harness, all four -4 ORB outlet fittings, two fuel socks, submersible injection hose, permanent clamps, and the lube packet. It is the same 9-1002 kit that ships inside the complete DW810 pump packages, offered separately for a second hanger, a pump moving into a different tank, or replacing the service items that wear out first.\u003c\/p\u003e\n\u003ch3\u003eWhat You'll Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA sealed, serviceable in-tank install instead of a bulkhead improvised out of whatever was on the shelf\u003c\/li\u003e\n\u003cli\u003eCorrect hose and clamps for submerged use, where ordinary fuel line and worm clamps fail\u003c\/li\u003e\n\u003cli\u003eFresh filtration on a pump that has been running on old socks\u003c\/li\u003e\n\u003cli\u003eEvery outlet size covered, so plumbing choice is not dictated by what came in the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4-wire bulkhead connector with retainer and O-ring for a sealed pass-through\u003c\/li\u003e\n\u003cli\u003ePump to bulkhead harness, pre-terminated\u003c\/li\u003e\n\u003cli\u003eAll four -4 ORB outlet fittings: 5\/16\" barb, 3\/8\" barb, -6AN, and -8AN\u003c\/li\u003e\n\u003cli\u003eTwo fuel socks with retainer clips\u003c\/li\u003e\n\u003cli\u003eSubmersible fuel injection hose in both 5\/16\" and 3\/8\"\u003c\/li\u003e\n\u003cli\u003ePermanent hose clamps in both 11.3mm and 13.3mm\u003c\/li\u003e\n\u003cli\u003eUniversal fitment, not tied to one hanger or chassis\u003c\/li\u003e\n\u003cli\u003eBacked by the DeatschWerks limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Details\u003c\/h3\u003e\n\u003cp\u003eThe parts that matter here are the ones people substitute and regret. The hose is submersible fuel injection hose, rated to live in fuel rather than carry it, and the clamps are permanent crimp-style rather than worm gear, which is what keeps a joint sealed on the wrong side of a tank wall. The bulkhead needs a 13\/32\" (10.3mm) hole drilled in the top of the assembly, clear of other plumbing, wiring, and sensors, and it installs with the metal retaining clip facing the connector; fitted backwards, the pump simply will not run. Outlet fittings thread into the pump's -4 ORB port with the O-ring in place and torque to 11 to 14 ft-lbs, no more. Hose lengths are 8 inches each, so a longer run inside the tank needs hose sourced separately. Note that this kit covers the mechanical and in-tank wiring side only: it does not contain the C105 dual speed controller, and a DW810 cannot run without one.\u003c\/p\u003e\n\u003ch3\u003eKit Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x 4-wire bulkhead connector with retainer and O-ring\u003c\/li\u003e\n\u003cli\u003e1x pump to bulkhead harness\u003c\/li\u003e\n\u003cli\u003e4x -4 ORB outlet fittings: 5\/16\" hose barb, 3\/8\" hose barb, -6AN, -8AN\u003c\/li\u003e\n\u003cli\u003e2x fuel socks with retainer clips\u003c\/li\u003e\n\u003cli\u003e1x 8\" length of 5\/16\" submersible fuel injection hose\u003c\/li\u003e\n\u003cli\u003e1x 8\" length of 3\/8\" submersible fuel injection hose\u003c\/li\u003e\n\u003cli\u003e3x 11.3mm permanent hose clamps\u003c\/li\u003e\n\u003cli\u003e3x 13.3mm permanent hose clamps\u003c\/li\u003e\n\u003cli\u003e1x lube packet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal: DeatschWerks DW810 brushless fuel pump installations in factory or aftermarket hangers\u003c\/li\u003e\n\u003cli\u003eReplacement or spare kit for a DW810 already in service\u003c\/li\u003e\n\u003cli\u003eDoes not include the pump\u003c\/li\u003e\n\u003cli\u003eDoes not include the C105 dual speed controller or its flying-lead harness, both of which the DW810 requires to run\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":43831658348611,"sku":"9-1002","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/9-1002.jpg?v=1789422644","url":"https:\/\/www.tunedbyshawn.com\/products\/deatschwerks-dw810-brushless-pump-install-kit-universal-9-1002","provider":"Tuned by Shawn","version":"1.0","type":"link"}