{"title":"Sensors","description":"","products":[{"product_id":"tuned-by-shawn-fast-acting-delphi-air-temperature-sensor","title":"Tuned By Shawn Fast Acting Delphi Air Temperature Sensor","description":"\u003cp\u003eIf your looking to purchase an aftermarket Fast Acting Air Temperature Sensor this is what we recommend. These sensors are non-polarity specific so it does not matter what wire goes to each side. These senors require sensor ground from the ECU and the signal input wire for what ever temperature you are trying to read. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSizes available:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3\/8\" - 18 NPTF\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eM14 x 1.5\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDelphi Temperature Sensor\u003c\/li\u003e\n\u003cli\u003eConnector kit \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdaptronic Users:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003eIn the software Eugene with the basemap loaded Select the tab Inputs \u0026gt; Temperature Sensor - Air Temp Sensor change the \"sensor type\" to Delco. No Pull-Up resistor is needed since any one of the 4 temperature inputs has it built in. \u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlease refer to the wiring guide located under the home tab in Eugene. You can access this by connecting to the ECU you have purchased or download the Eugene software along with the basemap provided for each ECU\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ballenger Motorsports","offers":[{"title":"Default Title","offer_id":16957355425859,"sku":"Delphiairtemp","price":37.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/DSCN4372.JPG?v=1703120795"},{"product_id":"tuned-by-shawn-0-150psig-liquid-pressure-sensor","title":"Tuned By Shawn 0-150PSIg Liquid Pressure Sensor","description":"\u003cp\u003eIf your looking to purchase an aftermarket Liquid Pressure Sensor for Fuel or Oil this is what Tuned by Shawn recommends. These sensors have 3 wires going to them - 5V power, Sensor ground, and Signal Output. Please refer to the diagram loaded in the product images for sensor pin locations. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0-150PSIg pressure sensor\u003c\/li\u003e\n\u003cli\u003eConnector Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/8 NPT Sealing Thread\u003c\/li\u003e\n\u003cli\u003e0.5 to 4.5 volt ratiometric output (0 psi at 0.5 volts and 150 psi at 4.5 volts, linear between these points)\u003c\/li\u003e\n\u003cli\u003e3-way circular GT150 \/ MP150 connector\u003c\/li\u003e\n\u003cli\u003eRequires 5 volt DC supply voltage and analog ground\u003c\/li\u003e\n\u003cli\u003eAccuracy: ±0.15 %FSS typ.\u003c\/li\u003e\n\u003cli\u003eTemp Drift: \u0026lt;0.50% Full Scale\u003c\/li\u003e\n\u003cli\u003eStability: \u0026lt;0.25% Full Scale\/Year\u003c\/li\u003e\n\u003cli\u003eOperating Temp: -40C to 125C\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: 1000PSI\u003c\/li\u003e\n\u003cli\u003eResponse Time: 1 ms (10% to 90% step change in pressure)\u003c\/li\u003e\n\u003cli\u003eWetted Materials: 304L Port \u0026amp; 316L Stainless Steel diaphragm\u003c\/li\u003e\n\u003cli\u003eVibration: 20G’s peak to peak sinusoidal\u003c\/li\u003e\n\u003cli\u003eWeight: \u0026lt;30g\u003c\/li\u003e\n\u003cli\u003eSupply Current: 5mA MAX. at 5 Vdc\u003c\/li\u003e\n\u003cli\u003eInstallation torque: Two to three turns from finger tight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Tuned By Shawn","offers":[{"title":"Default Title","offer_id":17419355848771,"sku":"TBS-03110","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/150psisensor.jpg?v=1704415039"},{"product_id":"tuned-by-shawn-ethanol-content-sensor-flex-fuel","title":"Tuned By Shawn Ethanol Content Sensor (Flex-fuel)","description":"\u003cp\u003eIf your looking to purchase an aftermarket Ethanol Content Sensor for flex Fuel this is what we recommend. These sensors have 3 wires going to them - 12V power, Sensor ground, and Signal Output. Sensor has Pin locations labeled on the sensor. Additionally these sensors not only read Ethanol content they also read fuel temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEthanol Content Sensor \u003c\/li\u003e\n\u003cli\u003eConnector with associated pins \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Tuned By Shawn","offers":[{"title":"Default Title","offer_id":17419813322819,"sku":"GM13577429","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20190115_142503.jpg?v=1783194165"},{"product_id":"x-series-wideband-uego-afr-sensor-controller-gauge","title":"X-Series Wideband UEGO AFR Sensor Controller Gauge","description":"\u003cp\u003eAEM’s X-Series Wideband UEGO Air\/Fuel Ratio Sensor Controller Gauges are built upon unique, patented 100% Digital technology (Patent 9,575,030) that makes them the fastest responding wideband air\/fuel ratio controllers in independent testing*.\u003c\/p\u003e\n\u003cp\u003eThe X-Series Wideband UEGO AFR Sensor Controller Gauge (PN 30-0300) measures 2 1\/16th-inch (52mm) in diameter and features a modern, visually striking faceplate and new seven-segment center display that is 87% larger than the 30-4110 AEM Wideband Gauge’s center display. This creates the perception of a larger overall gauge, but in a common 52mm size for easy mounting. Its slim depth (less than one inch overall) and ultra-slim cup depth of .200-inches dramatically increases its application base and potential mounting locations.\u003c\/p\u003e\n\u003cp\u003eThe X-Series Wideband UEGO AFR Gauge has a user configurable display via buttons on the gauge face that allows you to change AFR values for different fuels, Lambda or O2%, change the center display to three or four digits, perform a free-air calibration if desired as the sensor ages, and change the CAN message ID when linking multiple X-Series Inline Controllers or X-Series Controller Gauges. A black bezel and black dual-faced faceplate for air\/fuel and Lambda are included, and an optional silver bezel with white dual-faced air\/fuel and Lambda faceplate is available (PN 30-0300-ACC, sold separately). An Auto Dimming feature is included. Locking connectors ensure a positive connection between the harnesses and gauge and a new single board design adds to the new gauge’s durability.\u003c\/p\u003e\n\u003cp\u003eThe gauge includes a 0-5v and RS232 Serial Port output for feedback control and data logging, and an AEMnet (CANbus) output for data logging. AEMnet allows additional X-Series Wideband Controllers to be daisy chained together (up to 16 cylinders) for recording AFR in multiple cylinders. It supports vehicle\/system voltages up to 16V, and can be used on EFI or carbureted applications, and dynamometers in applications using gasoline, methanol, ethanol, Diesel, propane, and CNG.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eX-DIGITAL TECHNOLOGY\u003c\/strong\u003e\u003cbr\u003eX-Digital wideband technology gives these controllers the ability to read and report values that other controllers do not, which can deliver more optimized engine tuning and a safer overall operating condition. The controller’s high-speed digital implementation ensures no loss of signal fidelity and full transient response, making it able to identify the slightest fluctuations in AFR and output them in full value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHY RESPONSE TIME MATTERS\u003c\/strong\u003e\u003cbr\u003eFaster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune. AEM’s Wideband Controllers with X-Digital technology can reduce deadtime and improve the performance of your vehicle through more accurate AFR tuning. Deadtime is the delay between when exhaust gas composition changes and when that change is reported by the O2 sensor. While flow of exhaust gases (transport delay) can affect deadtime, it is not the only source. Often, the sensing elements response to the gas is the largest contributor to deadtime when an engine is in high RPM under load.\u003c\/p\u003e\n\u003cp\u003eWhen tuning an engine using wideband AFR feedback control on an inertia dyno, deadtime affects the data you are looking at because it is reported in a different operating location than when it actually occurred.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eThis means with long deadtimes, whatever changes you make to the base fueling will likely be in the wrong location.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis can be particularly dangerous to high compression and high-boost forced induction vehicles, and EFI systems that use feedback control to auto-tune.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReducing deadtime improves wideband feedback control, and can provide a safer, more powerful and accurate tune.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAEM’s Wideband Controllers with X-Series digital technology can reduce deadtime and improve the performance of your vehicle through more accurate AFR tuning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFACTORY CALIBRATION RESISTOR OR FREE-AIR CAL, IT’S YOUR CHOICE!\u003c\/strong\u003e\u003cbr\u003eThe X-Series Wideband Gauge and X-Series Inline Controller support the popular Bosch 4.9LSU sensor and can utilize both the factory calibration resistor and free-air calibration methods**. This allows users to take advantage of the precise factory resistor calibration when a sensor is new but then allows for free-air calibrations if the user desires when the sensor ages. It’s the perfect marriage of simplicity and accuracy!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT IS A WIDEBAND UEGO AIR\/FUEL CONTROLLER?\u003c\/strong\u003e\u003cbr\u003eAEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) Controllers are powerful, cost-effective tuning tools that allow users to accurately monitor the Air\/Fuel Ratio (AFR) of their engine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHY USE A WIDEBAND AIR\/FUEL CONTROLLER?\u003c\/strong\u003e\u003cbr\u003eAccurate AFR data is critical when tuning an engine. Running rich (very low air\/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air\/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air\/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air\/fuel controllers that can help ensure your vehicle is optimally tuned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAN I CHANGE THE AEM UEGO SENSOR’S CONNECTOR?\u003c\/strong\u003e\u003cbr\u003eNo. There is a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output.\u003c\/p\u003e\n\u003cp\u003e* Independently tested at 360° Product Testing (results reported on August 31st, 2015) against 17 competitors wideband UEGO Air\/Fuel Controllers. AEM X-Series Inline with Bosch 4.9LSU wideband sensor and AEM X-Series Wideband UEGO AFR Gauge with Bosch 4.9LSU sensor recorded the fastest response times.\u003cbr\u003e** Wideband UEGO sensors are wear items and their lifespan is determined by many factors including contamination from leaded fuels, automotive fluids, particulates, mechanical or thermal shock and from being unheated and exposed to the exhaust stream. Free-air calibration may correct drift as a sensor ages, but it is recommended that they are replaced as part of your vehicle’s maintenance program. When performing free-air calibration, please follow the procedure outlined in the instruction manual.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eX-SERIES WIDEBAND UEGO CONTROLLER FEATURES:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eX-Series Wideband UEGO AFR Controller Gauge were fastest responding wideband air\/fuel ratio controllers in an independent test vs. 17 competitors wideband AFR controllers\u003c\/li\u003e\n\u003cli\u003ePatented X-Digital wideband technology (Patent 9,575,030)\u003c\/li\u003e\n\u003cli\u003eIncludes Bosch 4.9LSU wideband UEGO sensor\u003c\/li\u003e\n\u003cli\u003eFactory calibrated resistor does not require free-air calibration, but technology allows for free-air calibration as sensor ages if user desires\u003c\/li\u003e\n\u003cli\u003eCompatible with vehicle\/system voltages up to 16V\u003c\/li\u003e\n\u003cli\u003e0-5V \u0026amp; RS232 output for data logging and feedback control, AEMnet (CANbus) for data logging and daisy-chaining multiple controllers up to 16 cylinders\u003c\/li\u003e\n\u003cli\u003eCan display AFR values in hundredths of %\u003c\/li\u003e\n\u003cli\u003e52mm gauge diameter and slim 0.825” gauge depth\u003c\/li\u003e\n\u003cli\u003eGauge cup depth only .200” deep!\u003c\/li\u003e\n\u003cli\u003eAuto dimming feature\u003c\/li\u003e\n\u003cli\u003eUser configurable display via buttons on the gauge face for changing AFR values, Lambda and O2%, and 3- or 4-digit display\u003c\/li\u003e\n\u003cli\u003eBlack bezel and black dual faced faceplate included (gauge only, silver bezel\/white gauge option sold separately, PN 30-0300-ACC)\u003c\/li\u003e\n\u003cli\u003eLocking connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAFR VALUE RANGE BY FUEL TYPES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay Gasoline values from 8.0:1 to 20.0:1 AFR\u003c\/li\u003e\n\u003cli\u003eDisplay Lambda values from .55 to 2.00\u003c\/li\u003e\n\u003cli\u003e0-5V Output Gasoline values from 8.5:1 to 18.0:1 AFR\u003c\/li\u003e\n\u003cli\u003eCANbus Output Gasoline values from 8.0:1 to 20.0:1 AFR\u003c\/li\u003e\n\u003cli\u003eCANbus Output Lambda values from .55 to 2.00\u003c\/li\u003e\n\u003cli\u003e0-5V Output Lambda values from .58 to 1.23\u003c\/li\u003e\n\u003cli\u003e0-5V Output E85 values from 5.7:1 to 12.0:1 AFR\u003c\/li\u003e\n\u003cli\u003e0-5V Output Ethanol values from 5.2:1 to 11.0:1 AFR\u003c\/li\u003e\n\u003cli\u003e0-5V Output Methanol values from 3.75:1 to 8.0:1 AFR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdaptronic ECU users:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor best experience with the AEM products its highly recommend to connect the AEM wideband to the Adaptronic ECU via the AEM serial output wire. We recommend purchasing the Innovate 3846 cable and cutting one end off and connecting it to the white wire on the innovate cable. You an also refer to the picture that is uploaded to the picture section of this specific product. \u003c\/p\u003e\n\u003cp\u003eOnce the wideband is connected via serial to the ECU you will open up Eugene while connected to the adaptronic ecu and go to the inputs tab, then select O2 \/ Lambda Sensors, click on O2 Sensor 1 or 2 (depending on your configuration there may be 2) change the connection to serial only, then click show under the serial In 1 setting option. Change the connection to AEM UEGO. Now you should be able view AFR\/Lambda values in the Eugene software. \u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":18246749454403,"sku":"30-0300","price":222.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/30-0300-kit-web.jpg?v=1703120839"},{"product_id":"rx8-plug-pin-n-play-flex-fuel-fuel-pressure-sensor-kit","title":"Rx8 Plug\/Pin N Play Flex-Fuel \/ Fuel Pressure Sensor Kit","description":"\u003cp\u003eThis is a Plug N Play\/Pin Flex-Fuel \/ Fuel Pressure Sensor Kit. The fittings used in this kit are from Speedflow a premium fuel fitting manufacture from Australia. This kit is designed to drop right into your OEM fuel system no cutting or making of lines. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTuned By Shawn Rx8 Plug N Pin Flex Fuel Sensor + male Weatherpack connector for the Power Wire. \u003c\/li\u003e\n\u003cli\u003eTuned By Shawn Rx8 Plug N Play Fuel Pressure Sensor \u003c\/li\u003e\n\u003cli\u003ePremium SpeedFlow Fuel Fittings \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAdaptronic Users - Flex Fuel Sensor Instructions - Ethanol Sensor Install:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e The Flex Fuel Sensor behaves a little differently then other 3 wire sensors. It uses 12v switched power and chassis ground.\u003c\/li\u003e\n\u003cli\u003ePin Locations for flex fuel sensor  \u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1A - Flex Fuel Sensor Input\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePull Pin 5AF and use that wire for 12V switched (can also be used to power a wideband like a LC-2)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnect the ground to the ground location on the passenger side right next to the ECU enclosure. \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eIn Eugene under the Inputs tab select Ethanol - Make sure the Ethanol Source is set to CAS 3\u003c\/li\u003e\n\u003cli\u003eIn Eugene under the Tuning - Fuel tab Select Fuel MAP 1 Settings - Change the Stoich Source from Constant to Flex Fuel (Ethanol sensor required) Once this option is select it enables all of the flex fuel maps. Here is Andy's video on \u003cstrong\u003e\u003cspan\u003e\u003ca href=\"https:\/\/adaptronicecu.com\/blogs\/modular-instructional-videos\/flex-fuel-tuning-on-modular-ecus\"\u003eFlex Fuel\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eFlex Fuel Sensor does more than read Ethanol content it also reads Fuel Temperature. In Eugene under the Inputs tab select Temperature Sensors - Select Fuel Temp Sensor - Change the Sensor Type to From Flex sensor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdaptronic Users - Fuel Pressure Sensor Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003eIn the software Eugene with the basemap loaded Select the tab Inputs \u0026gt; Liquid Pressure Sensors - Oil Pressure Sensor, Fuel Pressure Sensor - change the \"sensor type for external fuel sensor\" to - 0.5 - 4.5v (150PSIg)\u003c\/li\u003e\n\u003cli\u003eChange the Source from Default to Ch 4 - EMAP_ext\u003c\/li\u003e\n\u003cli\u003eGo to the output tab, Then Fuel system under the Injection section, click on fuel system - Set the Fuel Pressure Modeling to Measured.\u003c\/li\u003e\n\u003cli\u003eYou will want to set your Nominal Fuel pressure to match what the Fuel pressure is reading. On Most Rx8s unless you have an aftermarket Regulator the pressure will be at 60psi,  We recommend using a base fuel pressure of 43.5 when the engine is running and no vacuum source to the regulator. (after this is set you will reconnect the vacuum source) (for end users that have an aftermarket fuel pressure regulator.)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SpeedFlow","offers":[{"title":"Default Title","offer_id":18480407969859,"sku":"Rx8-Flex-PSI","price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/Rx8_Sensor_Kit.jpg?v=1703120856"},{"product_id":"ht-030420-plug-and-pins-only-delco-weather-pack-3-pin","title":"Plug and Pins Only - Delco Weather Pack 3 pinGM Style MAP Sensor Connector - Orange","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e HT-010104 - 3 Bar GM MAP Sensor HT-010106 - 4 Bar GM MAP Sensor\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Pack of 3 Pins.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885784131,"sku":"HT-030420","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-030420_00.jpg?v=1703120910"},{"product_id":"ht-070105-knock-sensor","title":"Knock SensorSuits 2014 Pro Tuner \"Knock Ears\" Kit","description":"","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885915203,"sku":"HT-070105","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-070105_00.jpg?v=1703120912"},{"product_id":"ht-154006-elite-pro-plug-in-ecu-ford-falcon-i6-barra","title":"Elite PRO Plug-in ECU - Ford Falcon i6 \"Barra\"+ Onboard Wideband Sensor Kit","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eLENGTH:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 2.5m (8')\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Ford Falcon BA (02-05), BF (05-08), FG (08-14) I6 4.0L DOHC VCT Barra engine with manual trans. Ford Falcon BF (05-08), FG (08-14) I6 4.0L DOHC VCT Barra engine with ZF 6HP26 6-speed auto. Naturally aspirated and turbo.\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Elite PRO Plug-in ECU, Auxiliary I\/O harness with AMP 34 Pin 4 row 4 keyway superseal connector, 300mm (12\") Elite CAN DTM-4 female receptacle\/socket, 30 waterproofing\/blanking pins and 10 spare pins to populate auxiliary I\/O positions. Wideband hardware pack with LSU 4.9 sensor, 1.2m (4') harness and weld-on sensor bung. 400mm (16\") Waterproof (Type B) USB Connection Cable to Mini Circular (90°) with waterproof cap.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\u003cbr\u003e\u003cdiv style=\"display: table;\"\u003e\u003cdiv style=\"display: table-row;\"\u003e\u003cdiv style=\"display: table-cell; width: 100%;\"\u003e\n\u003cdiv class=\"ht-product-info-small\"\u003e\u003ch3\u003eECU OVERVIEW\u003c\/h3\u003e\u003c\/div\u003e\n\u003cdiv class=\"ht-product-info-small\" style=\"padding-bottom: 5px;\"\u003e Haltech's new Elite Pro Plug-in ECU offers a true Plug'n'Play upgrade option for the popular Ford Falcon BA and BF models. No messy and time-consuming re-wiring required - the Elite Pro Plug-in connects directly to the factory wiring harness and fits perfectly in the factory ECU location. With an on-board wideband controller and sophisticated race functions the Elite Pro Plug-in is one of Haltech's most advanced ECUs to date. Apart from performance-oriented features like closed loop boost control, anti-lag and launch control, short and long term learning for fuel, ignition, boost and idle, the new Elite Pro Plug-in also controls all factory functions including variable cam control, cruise control, dash cluster and even the 6-speed automatic transmission.\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv style=\"display: table; width: 100%;\"\u003e\u003cdiv style=\"display: table-row;\"\u003e\n\u003cdiv style=\"display: table-cell; width: 50%;\" class=\"ht-product-info-small\"\u003e\u003cul style=\"margin-top: 0px; margin-bottom: 0px;\"\u003e\n\u003cli\u003eDie cast aluminium, water resistant case.\u003c\/li\u003e\n\u003cli\u003eOn-board automatic transmission control via CAN (ZF 6HP26).\u003c\/li\u003e\n\u003cli\u003eE85 Flex Fuel ready.\u003c\/li\u003e\n\u003cli\u003eMulti-fuel support. Petrol, Methanol and Ethanol.\u003c\/li\u003e\n\u003cli\u003eInternal single channel wideband (supports LSU4.9 sensor).\u003c\/li\u003e\n\u003cli\u003eVariable cam control.\u003c\/li\u003e\n\u003cli\u003eCruise control.\u003c\/li\u003e\n\u003cli\u003eOBDII compatible. Set and clear diagnostic trouble codes, view live engine data.\u003c\/li\u003e \u003c\/ul\u003e\u003c\/div\u003e\n\u003cdiv style=\"display: table-cell; width: 50%;\" class=\"ht-product-info-small\"\u003e\u003cul style=\"margin-top: 0px; margin-bottom: 0px;\"\u003e\n\u003cli\u003eShort and long term fuel, ignition, boost and idle control learning.\u003c\/li\u003e\n\u003cli\u003eKnock control with high speed digital filtering.\u003c\/li\u003e\n\u003cli\u003eClosed loop boost control. Tune by gear, wheel speed or time.\u003c\/li\u003e\n\u003cli\u003eClosed loop idle control with learning for consistent idle stability.\u003c\/li\u003e\n\u003cli\u003eClosed loop 02 control.\u003c\/li\u003e\n\u003cli\u003eAnti-lag and launch control with drag and rally modes.\u003c\/li\u003e\n\u003cli\u003eMulti level engine protection.\u003c\/li\u003e\n\u003cli\u003eESP calibration software. Intuitive and easy to use, ESP offers limitless tuning flexibility. Tune your engine by a combination of 4D tuning tables combined with 3D per cylinder compensations and multiple user definable corrections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cdiv style=\"height: 3px;\"\u003e\u003c\/div\u003e\u003cbr\u003e\u003ch2\u003eFEATURES\u003c\/h2\u003e\u003cbr\u003e\u003cdiv style=\"display: table; width: 100%;\"\u003e\u003cdiv style=\"display: table-row;\"\u003e\u003cdiv style=\"display: table-cell; width: 50%;\" class=\"ht-product-info-small\"\u003e\n\u003cdiv style=\"margin-top: 3px;\"\u003e\u003ch3\u003eECU OUTPUTS\u003c\/h3\u003e\u003c\/div\u003e \u003cul style=\"margin-top: 0px; margin-bottom: 0px;\"\u003e\n\u003cli\u003e6 x current controlled injector drivers (OEM). High or Low impedance injector compatible.\u003c\/li\u003e\n\u003cli\u003e8 x additional injector outputs available for staged injection, unused staged injector outputs are available to be used as generic programmable DPOs.\u003c\/li\u003e\n\u003cli\u003e6 x ignition outputs to support OEM Ford coils directly\u003c\/li\u003e\n\u003cli\u003eDigital pulsed outputs - as per OEM.\u003c\/li\u003e\n\u003cli\u003eDrive By Wire (DBW) output suits any throttle body and pedal including Ford OEM.\u003c\/li\u003e \u003c\/ul\u003e\n\u003cdiv style=\"margin-top: 3px;\"\u003e\u003ch3\u003eECU INPUTS\u003c\/h3\u003e\u003c\/div\u003e \u003cul style=\"margin-top: 0px; margin-bottom: 0px;\"\u003e\n\u003cli\u003eAnalogue voltage inputs (AVI): as per OEM.\u003c\/li\u003e\n\u003cli\u003e4 x additional user definable AVIs available on the auxiliary connector.\u003c\/li\u003e\n\u003cli\u003eDigital pulsed inputs (DPI): as per OEM.\u003c\/li\u003e\n\u003cli\u003e4 x additional user definable DPIs used for measuring duty cycle, frequency or state.\u003c\/li\u003e\n\u003cli\u003eEngine position inputs: as per OEM. Supports Ford Barra trigger pattern. Alternate generic trigger support also available.\u003c\/li\u003e\n\u003cli\u003eKnock inputs: as per OEM.\u003c\/li\u003e \u003c\/ul\u003e\n\u003cdiv style=\"margin-top: 3px;\"\u003e \u003ch3\u003eECU COMMUNICATION\u003c\/h3\u003e\n\u003c\/div\u003e \u003cul style=\"margin-top: 0px; margin-bottom: 0px;\"\u003e\n\u003cli\u003e2 x CAN bus communication.\u003c\/li\u003e\n\u003cli\u003eHaltech CAN (via auxiliary connector).\u003c\/li\u003e\n\u003cli\u003eVehicle CAN.\u003c\/li\u003e\n\u003cli\u003e1 x Circular mini connector for USB programming.\u003c\/li\u003e \u003c\/ul\u003e\n\u003cdiv style=\"margin-top: 3px;\"\u003e \u003ch3\u003eECU DATA LOGGING\u003c\/h3\u003e\n\u003c\/div\u003e \u003cul style=\"margin-top: 0px; margin-bottom: 0px;\"\u003e\n\u003cli\u003eOn-board data logging. Up to 40 channels.\u003c\/li\u003e\n\u003cli\u003e2MB internal storage.\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405894467651,"sku":"HT-154006","price":2578.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-154006_00.jpg?v=1703120938"},{"product_id":"ht-030412-plug-and-pins-only-delphi-3-pin","title":"Plug and Pins Only - Delphi 3 PinPressure Sensor Connector","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e HT-010110 - 5 Bar TI MAP Sensor HT-010138 - 5 Bar Motorsport MAP Sensor HT-010130 - 7 Bar TI MAP Sensor HT-010904 - 150 PSI TI Pressure Sensor HT-010910 - 150 PSI Pressure Sensor HT-010906 - 250 PSI TI Pressure Sensor HT-010912 - 250 PSI Pressure Sensor HT-010908 - 2000 PSI Pressure Sensor\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Pack of 3 Pins.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405903872067,"sku":"HT-030412","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-030412_00.jpg?v=1703121086"},{"product_id":"ht-030315-plug-and-pins-only-bosch-oil-temperature-sensor","title":"Plug and Pins Only - Bosch Oil \/ Temperature Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e HT-010920 - Bosch Fluid Pressure and Temperature Sensor\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 1 X 5 Pin Plug, 5 x Pins, 5 x Seals\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405903970371,"sku":"HT-030315","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-030315_00.jpg?v=1703121087"},{"product_id":"ht-010712-wideband-o2-sensor","title":"Wideband O2 Sensor NTK LZA08-H5","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e NEXUS Series devices\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 1 x NTK LZA08-H5 Wideband Sensor\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eNOTES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e NTK O2 sensor replacement\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405905870915,"sku":"HT-010712","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010712_00.jpg?v=1703121115"},{"product_id":"ht-010718-wideband-sensor-bosch-lsu-4-9","title":"Wideband Sensor - Bosch LSU 4.9","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Nexus ECU, Elite Pro Plugin ECU and WB1\/WB2\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Bosch LSU 4.9 sensor with Factory calibration resistor connector (not a Deutsch DT-6 connector)\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405905903683,"sku":"HT-010718","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010718_00.jpg?v=1703121115"},{"product_id":"ht-010714-wideband-o2-sensor-only-bosch-lsu-4-2","title":"Wideband O2 Sensor only - Bosch LSU 4.2","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Pre-terminated with female Deutsch DT-6 connector.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405905936451,"sku":"HT-010714","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010714_00.jpg?v=1703121115"},{"product_id":"ht-010740-onboard-wideband-sensor-pack","title":"Onboard Wideband Sensor Packfor Elite PRO Plug-in ECUs","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Elite PRO Plug-in ECUs for Australian-made Ford \"Barra\" Falcons only.\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e O2 Sensor, 1.2m extension cable and weld-on bung.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405906100291,"sku":"HT-010740","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010740_00.jpg?v=1703121119"},{"product_id":"ht-010702-o2-sensor-weld-on-bung","title":"O2 Sensor weld-on bung","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e M18 x1.5\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Copper washer and blanking plug.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405906165827,"sku":"HT-010702","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010702_00.jpg?v=1703121122"},{"product_id":"ht-011000-flex-fuel-composition-sensor","title":"Flex Fuel Composition Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 3\/8 \"GM Spring Lock\" fittings.\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Matching plug and 3 pins.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405907902531,"sku":"HT-011000","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-011000_00.jpg?v=1703121154"},{"product_id":"ht-011001-plug-and-pins-only-flex-fuel-composition-sensor","title":"Plug and Pins Only - Flex Fuel Composition Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Pack of 3 pins.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405907935299,"sku":"HT-011001","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-011001_00.jpg?v=1703121153"},{"product_id":"ht-010100-1-bar-gm-map-sensor","title":"1 Bar GM MAP Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Matching plug and 3 pins.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908000835,"sku":"HT-010100","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010100_00.jpg?v=1703121154"},{"product_id":"ht-010104-3-bar-gm-map-sensor","title":"3 Bar GM MAP Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Matching plug and 3 pins.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908033603,"sku":"HT-010104","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010104_00.jpg?v=1703121156"},{"product_id":"ht-010110-5-bar-ti-map-sensor","title":"5 Bar \"TI\" MAP Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e 1\/8 NPT\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Matching Delphi plug and 3 pins, -4 AN \u0026amp; 5mm hosetail adaptors.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eNOTES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e \"TI\" MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv style=\"display: table;\"\u003e\n\u003cdiv style=\"display: table-row;\"\u003e\n\u003cdiv style=\"display: table-cell; width: 100%;\"\u003e\n\u003cdiv class=\"ht-product-info-small\" style=\"padding-bottom: 5px;\"\u003ePlease take care when wiring this sensor as incorrect wiring will damage this sensor!All \"TI \" MAP and Pressure sensors are individually electronically tested before packaging and are sold \"as is\" and without any further warranty.Returns of opened sensors are not accepted. If you do not accept these terms and conditions please return the unopened sensor in its original packaging for a full refund.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908066371,"sku":"HT-010110","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010110_00.jpg?v=1703121156"},{"product_id":"ht-010130-7-bar-ti-map-sensor","title":"7 Bar \"TI\" MAP Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e 1\/8 NPT\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Matching plug and pins, -4 AN \u0026amp; 5mm hosetail adaptors.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eNOTES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e \"TI\" MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv style=\"display: table;\"\u003e\n\u003cdiv style=\"display: table-row;\"\u003e\n\u003cdiv style=\"display: table-cell; width: 100%;\"\u003e\n\u003cdiv class=\"ht-product-info-small\" style=\"padding-bottom: 5px;\"\u003ePlease take care when wiring this sensor as incorrect wiring will damage this sensor!All \"TI \" MAP and Pressure sensors are individually electronically tested before packaging and are sold \"as is\" and without any further warranty.Returns of opened sensors are not accepted. If you do not accept these terms and conditions please return the unopened sensor in its original packaging for a full refund.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908099139,"sku":"HT-010130","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010130_00.jpg?v=1703121156"},{"product_id":"ht-039103-pressure-sensor-extension-kit","title":"Pressure Sensor Extension Kit","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eLENGTH:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 450mm (18\")\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 1\/8th NPT Thread MAP, Oil and Fuel Pressure sensors.\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Fragola -4 AN Hose with Male \u0026amp; Female 1\/8th NPT Adaptors \u0026amp; Rubber Insulated P-Clamps.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908131907,"sku":"HT-039103","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-039103_00.jpg?v=1703121156"},{"product_id":"ht-010136-4-bar-motorsport-map-sensor","title":"4 Bar Motorsport MAP Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Matching male Deutsch DTM-3 Connector (HT-031001)\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908164675,"sku":"HT-010136","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010136_00.jpg?v=1703121156"},{"product_id":"ht-010134-3-bar-motorsport-map-sensor","title":"3 Bar Motorsport MAP Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Matching male Deutsch DTM-3 Connector (HT-031001)\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908197443,"sku":"HT-010134","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010134_00.jpg?v=1703121159"},{"product_id":"ht-010138-5-bar-motorsport-map-sensor","title":"5 Bar Motorsport MAP Sensor(Stainless Steel Diaphragm)","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e 1\/8 NPT\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Matching Delphi plug and 3 pins.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eNOTES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Motorsport MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv style=\"display: table;\"\u003e\n\u003cdiv style=\"display: table-row;\"\u003e\n\u003cdiv style=\"display: table-cell; width: 100%;\"\u003e\n\u003cdiv class=\"ht-product-info-small\" style=\"padding-bottom: 5px;\"\u003ePlease take care when wiring this sensor as incorrect wiring will damage this sensor!All Motorsport MAP and Pressure sensors are individually electronically tested before packaging and are sold \"as is\" and without any further warranty.Returns of opened sensors are not accepted. If you do not accept these terms and conditions please return the unopened sensor in its original packaging for a full refund.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908230211,"sku":"HT-010138","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010138_00.jpg?v=1703121159"},{"product_id":"ht-010910-150-psi-motorsport-fuel-oil-wastegate","title":"150 PSI Motorsport Fuel\/Oil\/WastegatePressure Sensor (Stainless Steel Diaphragm)","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e 1\/8 NPT\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Matching Delphi plug and 3 pins.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eNOTES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Motorsport Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv style=\"display: table;\"\u003e\n\u003cdiv style=\"display: table-row;\"\u003e\n\u003cdiv style=\"display: table-cell; width: 100%;\"\u003e\n\u003cdiv class=\"ht-product-info-small\" style=\"padding-bottom: 5px;\"\u003ePlease take care when wiring this sensor as incorrect wiring will damage this sensor! All Motorsport MAP and Pressure sensors are individually electronically tested before packaging and are sold \"as is\" and without any further warranty. Returns of opened sensors are not accepted. If you do not accept these terms and conditions please return the unopened sensor in its original packaging for a full refund.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908262979,"sku":"HT-010910","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010910_00.jpg?v=1703121160"},{"product_id":"ht-010912-250-psi-motorsport-fuel-oil-wastegate","title":"250 PSI Motorsport Fuel\/Oil\/WastegatePressure Sensor (Stainless Steel Diaphragm)","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e 1\/8 NPT\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Matching Delphi plug and 3 pins.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eNOTES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Motorsport Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv style=\"display: table;\"\u003e\n\u003cdiv style=\"display: table-row;\"\u003e\n\u003cdiv style=\"display: table-cell; width: 100%;\"\u003e\n\u003cdiv class=\"ht-product-info-small\" style=\"padding-bottom: 5px;\"\u003ePlease take care when wiring this sensor as incorrect wiring will damage this sensor!All Motorsport MAP and Pressure sensors are individually electronically tested before packaging and are sold \"as is\" and without any further warranty.Returns of opened sensors are not accepted. If you do not accept these terms and conditions please return the unopened sensor in its original packaging for a full refund.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908295747,"sku":"HT-010912","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010912_00.jpg?v=1703121159"},{"product_id":"ht-010904-150-psi-ti-fuel-oil-wastegate-pressure-sensor","title":"150 PSI \"TI\" Fuel\/Oil\/Wastegate Pressure Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e 1\/8 NPT\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Matching Delphi plug and 3 pins, -4 AN adaptor.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eNOTES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e \"TI\" Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv style=\"display: table;\"\u003e\n\u003cdiv style=\"display: table-row;\"\u003e\n\u003cdiv style=\"display: table-cell; width: 100%;\"\u003e\n\u003cdiv class=\"ht-product-info-small\" style=\"padding-bottom: 5px;\"\u003ePlease take care when wiring this sensor as incorrect wiring will damage this sensor!All \"TI \" MAP and Pressure sensors are individually electronically tested before packaging and are sold \"as is\" and without any further warranty.Returns of opened sensors are not accepted. If you do not accept these terms and conditions please return the unopened sensor in its original packaging for a full refund.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908328515,"sku":"HT-010904","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010904_00.jpg?v=1703121159"},{"product_id":"ht-010906-250-psi-ti-fuel-oil-wastegate-pressure-sensor","title":"250 PSI \"TI\" Fuel\/Oil\/Wastegate Pressure Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 1\/8 NPT\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Matching plug and pins, -4 AN adaptor.\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eNOTES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e \"TI\" Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\u003cbr\u003e\u003cdiv style=\"display: table;\"\u003e\u003cdiv style=\"display: table-row;\"\u003e\u003cdiv style=\"display: table-cell; width: 100%;\"\u003e\u003cdiv class=\"ht-product-info-small\" style=\"padding-bottom: 5px;\"\u003ePlease take care when wiring this sensor as incorrect wiring will damage this sensor!All \"TI \" MAP and Pressure sensors are individually electronically tested before packaging and are sold \"as is\" and without any further warranty.Returns of opened sensors are not accepted. If you do not accept these terms and conditions please return the unopened sensor in its original packaging for a full refund.\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908361283,"sku":"HT-010906","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010906_00.jpg?v=1703121163"},{"product_id":"ht-010908-2000-psi-brake-nitrous-pressure-sensor","title":"2000 PSI Brake\/Nitrous Pressure Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e 1\/8 NPT\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Matching Delphi plug and 3 pins.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv style=\"display: table;\"\u003e\n\u003cdiv style=\"display: table-row;\"\u003e\n\u003cdiv style=\"display: table-cell; width: 100%;\"\u003e\n\u003cdiv class=\"ht-product-info-small\" style=\"padding-bottom: 5px;\"\u003ePlease take care when wiring this sensor as incorrect wiring will damage this sensor!All Honeywell Pressure sensors are individually electronically tested before packaging and are sold \"as is\" and without any further warranty.Returns of opened sensors are not accepted. If you do not accept these terms and conditions please return the unopened sensor in its original packaging for a full refund.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908394051,"sku":"HT-010908","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010908_00.jpg?v=1703121164"},{"product_id":"ht-010916-500-psi-ti-pressure-sensor","title":"500 PSI \"TI\" Pressure Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e 1\/8 NPT\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Matching plug and pins, -4 AN adaptor.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eNOTES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e \"TI\" Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv style=\"display: table;\"\u003e\n\u003cdiv style=\"display: table-row;\"\u003e\n\u003cdiv style=\"display: table-cell; width: 100%;\"\u003e\n\u003cdiv class=\"ht-product-info-small\" style=\"padding-bottom: 5px;\"\u003ePlease take care when wiring this sensor as incorrect wiring will damage this sensor!All \"TI \" MAP and Pressure sensors are individually electronically tested before packaging and are sold \"as is\" and without any further warranty.Returns of opened sensors are not accepted. If you do not accept these terms and conditions please return the unopened sensor in its original packaging for a full refund.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908426819,"sku":"HT-010916","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010916_00.jpg?v=1703121163"},{"product_id":"ht-010206-air-temp-sensor","title":"Air Temp Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 1\/8 NPT\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Matching male Deutsch DTM-2 Connector (HT-031000)\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eNOTES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 127 deg C (260 F) Max reading.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908656195,"sku":"HT-010206","price":56.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010206_00.jpg?v=1703121167"},{"product_id":"ht-010306-oil-temperature-sensor-high-range","title":"Oil Temperature sensor High Range","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 1\/8 NPT 27TPI\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Matching Bosch EV1 plug \u0026amp; pins.\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eNOTES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 150 deg C (302 F) Max reading.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908754499,"sku":"HT-010306","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010306_00.jpg?v=1703121167"},{"product_id":"ht-010408-throttle-position-sensor-motorsport-contactless","title":"Throttle Position Sensor - Motorsport Contactless","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSIZE:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e 8mm D-Shaft\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e CW \u0026amp; CCW Rotation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003e\u003cspan\u003eHT-010409\u003c\/span\u003e INCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Matching Set of Deutsch DTM-3 Connectors (HT-031014)\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis compact, contactless Hall Effect throttle position sensor provides dual channel complementary voltage signals as the throttle rotates, making it suitable for both mechanical cable type throttles and DBW throttle systems that require an external TPS separate from the motor. Ingress Protection IP68.\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908885571,"sku":"HT-010409","price":240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/HT-010409_00.avif?v=1781469031"},{"product_id":"ht-010604-s3-black-dual-channel-hall-effect-sensor","title":"S3 - Black Dual Channel Hall Effect Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 1\/2\" UNF\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Crank\/Cam.\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Bosch 4 Pin Junior Timer Female Connector and 4 pins.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908951107,"sku":"HT-010604","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010604_00.jpg?v=1703121170"},{"product_id":"ht-010610-red-single-channel-hall-effect-sensor","title":"\"Red\" Single Channel Hall Effect Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e M12x1.0\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Wheel Speed, Crank\/Cam etc.\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Matching set of Deutsch DTM 3 connectors (HT-031014)\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405909016643,"sku":"HT-010610","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010610_00.jpg?v=1703121170"},{"product_id":"ht-010612-stainless-steel-single-channel-hall-effect-sensor","title":"Stainless Steel Single Channel Hall Effect Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 3\/8 24 TPI\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Wheel Speed, Crank\/Cam etc.\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Matching set of Deutsch DTM 3 connectors (HT-031014)\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405909082179,"sku":"HT-010612","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010612_00.jpg?v=1703121170"},{"product_id":"ht-010609-gt101-style-high-frequency-hall-effect-sensor","title":"GT101 Style High Frequency Hall Effect Sensor","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSIZE:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 18mm Diameter\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Wheel Speed, Crank\/Cam etc.\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Matching set of Deutsch DTM 3 connectors (HT-031014)\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405909147715,"sku":"HT-010609","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010609_00.jpg?v=1703121170"},{"product_id":"ht-011100-knock-sensor-genuine-bosch","title":"Knock Sensor - Genuine Bosch","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 8mm (5\/16\") mounting bolt.\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Matching plug and 2 pins.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405909180483,"sku":"HT-011100","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-011100_00.jpg?v=1703121170"},{"product_id":"ht-011601-tms-4-tyre-monitoring-system","title":"TMS-4 Tyre Monitoring SystemExternal Sensors","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Haltech Nexus and Elite ECU's using NSP and ESP Software\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e 1 x Haltech TMS-4 Reciever 1 x TE Mcon to DTM-4 CAN Cable 4 x External Sensors 4 x anti-theft lock nuts Lock Nut spanner Mounting Hardware Quick Start Guide\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eNOTES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Batteries for external sensors are included and are replaceable (Use- CR1632) Typical lifespan of battery is 1 to 2 years\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv style=\"display: table;\"\u003e\n\u003cdiv style=\"display: table-row;\"\u003e\n\u003cdiv style=\"display: table-cell; width: 100%;\"\u003e\n\u003cdiv class=\"ht-product-info-small\"\u003eTMS-4 OVERVIEW\u003c\/div\u003e\n\u003cdiv class=\"ht-product-info-small\" style=\"padding-bottom: 5px;\"\u003eThe TMS-4 can fire several optional trouble codes, including:\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: table; width: 100%;\"\u003e\n\u003cdiv style=\"display: table-row;\"\u003e\n\u003cdiv style=\"display: table-cell; width: 50%;\" class=\"ht-product-info-small\"\u003e\n\u003cul style=\"margin-top: 0px; margin-bottom: 0px;\"\u003e\n\u003cli\u003ePressure High \/ Pressure Low\u003c\/li\u003e\n\u003cli\u003eTemperature High\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: table-cell; width: 50%;\" class=\"ht-product-info-small\"\u003e\n\u003cul style=\"margin-top: 0px; margin-bottom: 0px;\"\u003e\n\u003cli\u003eAir Leak Detected\u003c\/li\u003e\n\u003cli\u003eSensor Battery Voltage Low\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"height: 3px;\"\u003e\u003c\/div\u003e\n\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405909246019,"sku":"HT-011601","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-011601_00.jpg?v=1703121173"},{"product_id":"ht-011600-tms-4-tyre-monitoring-system","title":"TMS-4 Tyre Monitoring SystemInternal Sensors","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Haltech Nexus and Elite ECU's using NSP and ESP Software\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e 1 x Haltech TMS-4 Reciever 1 x TE Mcon to DTM-4 CAN Cable 4 x Internal Sensors Warning Sticker Set Mounting Hardware Quick Start Guide\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eNOTES:\u003c\/b\u003e \u003cspan style=\"font-weight: normal;\"\u003e Batteries for internal sensors are included and are NOT replaceable Typical lifespan of battery is 3years\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv style=\"display: table;\"\u003e\n\u003cdiv style=\"display: table-row;\"\u003e\n\u003cdiv style=\"display: table-cell; width: 100%;\"\u003e\n\u003cdiv class=\"ht-product-info-small\"\u003eTMS-4 OVERVIEW\u003c\/div\u003e\n\u003cdiv class=\"ht-product-info-small\" style=\"padding-bottom: 5px;\"\u003eThe TMS-4 can fire several optional trouble codes, including:\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: table; width: 100%;\"\u003e\n\u003cdiv style=\"display: table-row;\"\u003e\n\u003cdiv style=\"display: table-cell; width: 50%;\" class=\"ht-product-info-small\"\u003e\n\u003cul style=\"margin-top: 0px; margin-bottom: 0px;\"\u003e\n\u003cli\u003ePressure High \/ Pressure Low\u003c\/li\u003e\n\u003cli\u003eTemperature High\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: table-cell; width: 50%;\" class=\"ht-product-info-small\"\u003e\n\u003cul style=\"margin-top: 0px; margin-bottom: 0px;\"\u003e\n\u003cli\u003eAir Leak Detected\u003c\/li\u003e\n\u003cli\u003eSensor Battery Voltage Low\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"height: 3px;\"\u003e\u003c\/div\u003e\n\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405909278787,"sku":"HT-011600","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-011600_00.jpg?v=1703121173"},{"product_id":"ht-020402-co2-boost-control-dual-solenoid","title":"CO2 Boost Control Dual Solenoid\u0026 Pressure Sensor Kit","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eTHREAD:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e 1\/8 NPT\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eINCLUDES:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Two 3 port 33Hz boost control solenoid kits, 150 PSI \"TI\" wastegate pressure sensor with -4 AN adaptor and \"T\" fitting.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405910425667,"sku":"HT-020402","price":485.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-020402_00.jpg?v=1703121197"},{"product_id":"ht-130334-elite-1000-1500-crank-angle-sensor-sub-harness","title":"Elite 1000\/1500 Crank Angle Sensor Sub-Harnessfor Mazda 13B S6-8","description":"\u003cdiv class=\"ht-catalogue-info-small\"\u003e\n\u003cb\u003eSUITS:\u003c\/b\u003e \u003cspan style=\"font-weight:normal;\"\u003e Mazda 13B engine found in the RX-7 Series 6 - Series 8.\u003c\/span\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\u003cbr\u003e\u003cdiv style=\"display: table;\"\u003e\u003cdiv style=\"display: table-row;\"\u003e\u003cdiv style=\"display: table-cell; width: 100%;\"\u003e\u003cdiv class=\"ht-product-info-small\" style=\"padding-bottom: 5px;\"\u003eThe fastest and most cost effective way to wire your race car or engine conversion!Simply connect a handful of labelled wires and this plug and Play product allows you to be up and running in just a few hours.\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cbr\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405916782659,"sku":"HT-130334","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-130334_00.jpg?v=1703121260"},{"product_id":"injector-dynamics-sensor-add-on-for-id-f750","title":"Injector Dynamics Sensor Add On for ID-F750","description":"\u003cp\u003eInjector Dynamics Sensor Add On for ID-F750\u003c\/p\u003e","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":39490998403139,"sku":"IDXPTS","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/b99d9ed78fc7d63536eba3fdc26b5b5a.jpg?v=1703121420"},{"product_id":"radium-engineering-lotus-alum-weld-on-denso-maf-sensor-flange","title":"Radium Engineering Lotus Alum Weld-On Denso MAF Sensor Flange","description":"\u003cp\u003eWeld On CNC machined and polished billet 6061-T6 aluminum. Pre-Tapped M4 threads for sensor mount.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39491001614403,"sku":"RAD11-0001","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/11a0c52c9b3f9a6f2b6ba13045034aeb.jpg?v=1703121422"},{"product_id":"turbosmart-gen-v-wg38-40-74mm-sensor-cap-black","title":"Turbosmart Gen-V WG38\/40 74mm Sensor Cap - Black","description":"\u003cp\u003eTurbosmart Gen-V WG38\/40 74mm Sensor Cap - Black\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":39491052208195,"sku":"TURTS-0550-3022","price":215.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/9ccc2c4b1fe4d7a02a2cc494cb494875.jpg?v=1703122099"},{"product_id":"radium-split-flow-flex-fuel-sensor-adapter","title":"Radium Split-Flow Flex Fuel Sensor Adapter","description":"\u003cp\u003eThis device allows implementing an ethanol content sensor into a high flow fuel line. The design has dual passages that the fuel can flow through, so there is no loss in fuel flow. Can be used on feed or return fuel lines. 10AN female ports will require adapters to match the hose in the vehicle.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39499261935683,"sku":"RAD20-0589","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/c74b5636bea99c0505640007963c80fd.jpg?v=1703122259"},{"product_id":"linear-position-sensor-1-2-100mm-travel-length-between-mounting-holes-closed-217mm","title":"Linear Position Sensor - 1\/2\" - 100mm Travel Length: Between Mounting Holes (Closed) 217mm","description":"\u003cdiv class=\"product_single-info\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSuits: \u003c\/strong\u003eAll ECU's with spare AVI\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncludes: \u003c\/strong\u003e1 x Sensor , 1 x Opposing Connector Set\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNotes: \u003c\/strong\u003eUse of nylon mounting bolts recommended for sensor protection\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":40146162581571,"sku":"HT-011202","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-011202_00.jpg?v=1703122576"},{"product_id":"linear-position-sensor-1-2-150mm-travel-length-between-mounting-holes-closed-267mm-low-stock","title":"Linear Position Sensor - 1\/2\" - 150mm Travel Length: Between Mounting Holes (Closed) 267mm Low Stock","description":"\u003cdiv class=\"product_single-info\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSuits: \u003c\/strong\u003eAll ECU's with spare AVI\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncludes: \u003c\/strong\u003e1 x Sensor , 1 x Opposing Connector Set\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNotes: \u003c\/strong\u003eUse of nylon mounting bolts recommended for sensor protection\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIdeal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":40146164351043,"sku":"HT-011203","price":140.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-011203_00.jpg?v=1703122576"},{"product_id":"linear-position-sensor-1-2-200mm-travel-length-between-mounting-holes-closed-317mm","title":"Linear Position Sensor - 1\/2\" - 200mm Travel Length: Between Mounting Holes (Closed) 317mm","description":"\u003cdiv class=\"product_single-info\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSuits: \u003c\/strong\u003eAll ECU's with spare AVI\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncludes: \u003c\/strong\u003e1 x Sensor , 1 x Opposing Connector Set\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNotes: \u003c\/strong\u003eUse of nylon mounting bolts recommended for sensor protection\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":40146165956675,"sku":"HT-011204","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-011204_00.jpg?v=1703122576"}],"url":"https:\/\/www.tunedbyshawn.com\/collections\/sensors.oembed?page=9","provider":"Tuned by Shawn","version":"1.0","type":"link"}