{"title":"Radium Fuel Surge Tank","description":"","products":[{"product_id":"radium-engineering-universal-fuel-surge-tank-wiring-harness-fully-populated","title":"Radium Engineering Universal Fuel Surge Tank Wiring Harness - Fully Populated","description":"\u003cp\u003eFully finished fuel pump power wiring harness; Harness is finished in anti-abrasion sleeving\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39491005218883,"sku":"RAD17-0024-00","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/0654db3a29e8ff70606e1653c623c5dc.jpg?v=1703121507"},{"product_id":"fcst-fuel-cell-surge-tank","title":"FCST, Fuel Cell Surge Tank","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eFor installation on older 20-049X-XX FCST versions, click \u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0200.PDF\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0200.PDF\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eFor installation on older 20-014X-XX FCST versions, click \u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0079G.PDF\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0079G.PDF\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTo configure a complete fuel cell with FCST and other accessories, click below:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Configurator.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Configurator.aspx\" target=\"_blank\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/Fuel_Cell_config_banner.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/Fuel_Cell_config_banner.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBACKGROUND\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eSince 2010, external Radium Engineering fuel surge tanks have been an excellent way to eliminate fuel starvation that occurs in racing. To simplify plumbing and packaging, in 2013 Radium Engineering introduced the first generation Fuel Cell Surge Tank (FCST) to the competition vehicle market. It quickly became the preferred fuel system for professional racing.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWHAT IS A FCST?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Fuel Cell Surge Tank is a drop-in fuel pump system for Radium Engineering's popular fuel cells or any cell that uses the industry standard 6x10 24-bolt fill plate bolt pattern. The FCST is designed to protect EFI vehicles that experience fuel starvation. It is NOT a glorified trap door box with baffles. It features a true dual-chamber fuel tank utilizing a single lift pump and up to 3 surge tank pumps all packaged inside the fuel cell. It provides all the benefits of a traditional external fuel surge tank without safety concerns and plumbing complexity. \u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIS THIS COMPATIBLE WITH MY FUEL CELL?\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eTo install a Radium Engineering FCST into a fuel cell, the following criteria must be met:\u003cbr data-mce-fragment=\"1\"\u003e1. The cell must have the industry standard 6\"x10\" 24-bolt flange opening.\u003cbr data-mce-fragment=\"1\"\u003e2. The opening must be on the top face of the fuel cell (i.e. not a side face).\u003cbr data-mce-fragment=\"1\"\u003e3. The cell depth must be at least 7.7\" (196mm) measured from the outer top face to the internal bottom face.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHOW IT WORKS\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/strong\u003eA lift pump scavenges fuel from the bottom of the fuel cell and pumps it into the 2 liter surge tank. Inside the surge tank canister, up to 3 EFI fuel pumps can be used to feed high pressure fuel to the engine. If the lift pump starves, the volume inside the surge tank canister will keep the surge tank pumps fed and the engine supplied with fuel. The return from the pressure regulator is also routed to the surge tank canister to help keep it full.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/FCST_Fill_Valves.png\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/FCST_Fill_Valves.png\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAs shown above, there are three fill valves integrated to the bottom of the surge tank. These 1-way FKM Viton fill valves are sealed shut unless the fuel level in the cell rises above the fuel level in the surge tank. If this happens, each fill valve opens and sends 355LPH of fuel (1065LPH total) into the surge tank until fuel level reaches an equilibrium. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eExcess fuel in the surge tank simply overflows back into the fuel cell. This dynamic sequence is all done inside the safety of a fuel cell.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFEATURES FOR 20-069X-XX FCST\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOver the years, Radium Engineering has continued to refine the FCST into a robust and highly functional piece of hardware.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Merged single 10AN ORB female threaded outlet. All pumps use check valves that prevent back-flow for multi-pump applications.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-One-way fill valve located on the bottom of the canister that allows fuel in, but not out, keeping the surge tank full.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Multiple fuel pump options including gerotor, turbine, and brushless DC motor pumps.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Hermetically sealed high-current stainless steel electrical studs capable of handling all pumps.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Simplified servicing features eliminating nylon sealing washers and fuel cell retaining brackets.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Full CNC aluminum construction with anodized surfacing for superior corrosion resistance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Fuel compatibility: leaded and unleaded gasoline, methanol, ethanol, E85, etc.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Dynamic safety vent valve with rollover protection and fuel fill shut-off.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Optional fuel surge tank level switch and diagnostic LED failsafe port (shown below).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-069X-XX_Closeup-1.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-069X-XX_Closeup-1.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWHATS IN THE BOX?\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eThe following comes standard with every FCST variation configured per part number\u003cbr data-mce-fragment=\"1\"\u003e-8AN DSV (dynamic safety vent) valve\u003cbr data-mce-fragment=\"1\"\u003e-6x10 24-hole FKM Viton gasket\u003cbr data-mce-fragment=\"1\"\u003e-6AN male return fitting (other sizes can be utilized)\u003cbr data-mce-fragment=\"1\"\u003e-8AN male pump out fitting (other sizes can be utilized)\u003cbr data-mce-fragment=\"1\"\u003e-Fuel level sensor block-off plate\u003cbr data-mce-fragment=\"1\"\u003e-Fuel level switch block-off plug\u003cbr data-mce-fragment=\"1\"\u003e-FKM Viton 1-way fill valves\u003cbr data-mce-fragment=\"1\"\u003e-Stainless steel mounting hardware\u003cbr data-mce-fragment=\"1\"\u003e-Insulated anodized aluminum acorn nuts\u003cbr data-mce-fragment=\"1\"\u003e-Electrical power wire ring terminals\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e-Links for compatible fillers (not included), \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Filler-Options-P573.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Filler-Options-P573.aspx\"\u003eDirect Mount\u003c\/a\u003e or \u003ca href=\"http:\/\/www.radiumauto.com\/Remote-Mount-Filler-Options-P1666.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Remote-Mount-Filler-Options-P1666.aspx\"\u003eRemote Mount\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSELECTING YOUR FCST\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/span\u003eThe different FCST part numbers are based on the brand and quantity of fuel pumps. When determining a fuel pump configuration, use the chart below to select a combination that can support the engine's output. More fuel pump information can be found \u003ca href=\"http:\/\/www.radiumauto.com\/Blog\/Post\/Fuel-Pumps-Used-by-Radium-Engineering-97\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Blog\/Post\/Fuel-Pumps-Used-by-Radium-Engineering-97\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003eIf you would like to use a different pump, please contact Radium technical support.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-069X-XX FCST\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 20-069X-XX Fuel Cell Surge Tanks (with exception to brushless E5LM) are available with and without pumps included. The lift pump is always matched to be the same style pump(s) found inside the fuel surge tank canister. Any option that lists \"Pump Included\" comes pre-assembled with new fuel pumps and filters installed.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-069X-XX.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-069X-XX.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIf \"pumps not included\" is ordered (shown above), fuel pumps must be sourced separately. A filter sock will only be required for the lift pump as inlet filters are already supplied for the surge tank pumps. Also, there will be enough components included with this option to use up to 3 pumps in the surge tank. Depending on the setup, some parts may not be used.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0693-00 FCST, PUMPS NOT INCLUDED, BRUSHLESS TI AUTOMOTIVE E5LM\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 20-0693-00 Fuel Cell Surge Tank is only available without pumps included. It is designed to use one or two Ti Automotive E5LM brushess fuel pumps inside the surge tank. A standard brushed pump is used as a lift pump.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0693-00.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0693-00.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eTi Automotive E5LM brushless fuel pumps can be purchased\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Ti-Automotive-BKS1000-Brushless-Pump-and-Controller-P1694.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Ti-Automotive-BKS1000-Brushless-Pump-and-Controller-P1694.aspx\"\u003eHERE\u003c\/a\u003e, but will not be installed by Radium Engineering. Assembly must be performed by the installer.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0693-00_Install.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0693-00_Install.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAs shown below, the lift pump electrical and plumbing is set to be compatible with Walbro F90000267\/274\/285\/295 fuel pumps. Radium Engineering recommends the\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Walbro-F90000295-E85-Fuel-Pump-P1714.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Walbro-F90000295-E85-Fuel-Pump-P1714.aspx\"\u003eWalbro F90000295\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eas a lift pump for maximum flow. Filter socks are required for all pumps. \u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0693-00_Assembly.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0693-00_Assembly.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNOTE: Ti Automotive brushless fuel pumps do not have integrated check valves like many other pumps.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0598_install2.jpg\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0598_install2.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSo this FCST includes two \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Pump-Outlet-Adapter-Check-Valve-P1709.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Pump-Outlet-Adapter-Check-Valve-P1709.aspx\"\u003e20-0598\u003c\/a\u003e fuel pump outlet adapter check valves (shown above). Because the 2 surge tank pumps merge into a single outlet collector, these high flow 1-way valves permit multiple pumps to be staged without backflow.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0695-00 FCST, PUMPS NOT INCLUDED, EXTERNAL PUMPS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe 20-0695-00 Fuel Cell Surge Tank is only available without pumps not included. It is designed to be used with a mechanical fuel pump or inline electric pump(s). One or two -10AN (5\/8\") fuel pickups are used inside the surge tank. Each pickup uses a 80u (micron) filter. If two pickups are used, \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Distribution-Blocks-P918.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Distribution-Blocks-P918.aspx\"\u003e20-0737 Distribution Block\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e is recommended for pumps that use a 12AN inlet.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0695-00_New.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0695-00_New.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe lift pump electrical and plumbing for this kit is set to be compatible with Walbro F90000267\/274\/285\/295 fuel pumps. Radium Engineering recommends the \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Walbro-F90000295-E85-Fuel-Pump-P1714.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Walbro-F90000295-E85-Fuel-Pump-P1714.aspx\"\u003eWalbro F90000295\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e as a lift pump for maximum flow with a \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Pump-Inlet-Filter-Socks-P448.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Pump-Inlet-Filter-Socks-P448.aspx\"\u003e14-0143 Filter Sock\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSTANDARD FITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePUMP OUT -8AN MALE\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe external fuel pump outlet port is signified by the \"PUMP OUT\" engraving. It uses 7\/8\"-14 threads making it compatible with all 10AN ORB fittings. The FCST comes standard with a common 10AN ORB to 8AN male adapter fitting. However, various 10AN ORB adapter fittings can be purchased separately\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/10AN-ORB-Fittings-P297.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/10AN-ORB-Fittings-P297.aspx\"\u003eHERE\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRETURN -6AN MALE\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe external \"RETURN\" port is used for low pressure fuel returning from the FPR. This port uses 3\/4\"-16 threads making it compatible with all 8AN ORB fittings. The FCST comes standard with a common 8AN ORB to 6AN male adapter fitting. However, various 8AN ORB adapter fittings can be purchased separately \u003ca href=\"http:\/\/www.radiumauto.com\/8AN-ORB-Fittings-P479.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/8AN-ORB-Fittings-P479.aspx\"\u003eHERE\u003c\/a\u003e. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eVENT -8AN MALE\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe external \"VENT\" port is tapped with 1-1\/16\"-12 threads making it compatible with all 12AN ORB fittings. The FCST comes standard with\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\"\u003e20-0435\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ewhich uses a common 8AN male outlet fitting for standard fuel filling. However,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\"\u003e20-0535\u003c\/a\u003e can be purchased separately with a 12AN male fitting for quick fill dry break systems that require a high-flow vent.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWHAT ELSE IS NEEDED?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFUEL CELL\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eA fuel cell is not included with the FCST. The fuel cell MUST use a 6x10, 24-bolt fill plate flange. The distance from the outer top face to the internal botton face must be at least 7.7\" (196mm). The distance from the top of the fuel cell to the bottom of the lift pump filter (lowest point of the kit) is adjustable. However, if the fuel cell is deeper than 10 inches, purchase this\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.radiumauto.com\/FCST-Lift-Pump-Extension-for-Deep-Cells-P833.aspx\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.radiumauto.com\/FCST-Lift-Pump-Extension-for-Deep-Cells-P833.aspx\"\u003eLift Pump Extension\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFUEL FILLER\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eIf you do not currently have a 6-bolt (2.18\" B.C.) filler, Radium Engineering has them for both \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Fill-Neck-P573.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Fill-Neck-P573.aspx\"\u003edirect\u003c\/a\u003e filling and \u003ca href=\"http:\/\/www.radiumauto.com\/Remote-Mount-Filler-Options-P1666.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Remote-Mount-Filler-Options-P1666.aspx\"\u003eremote\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003efilling.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eVENT HOSE\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eA hose and\/or filter must be connected to the \"VENT\" port fitting. For compatible vent kits and more information on how these are plumbed and routed, go \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Vent-Kits-P1518.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Vent-Kits-P1518.aspx\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOPTIONAL ACCESSORIES\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFUEL LEVEL SENDER\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe FCST comes standard with a fuel level sender block off plate. However, SAE fuel level senders of various lengths can be purchased separately \u003ca href=\"http:\/\/www.radiumauto.com\/Universal-Fuel-Cells-C105.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Universal-Fuel-Cells-C105.aspx\"\u003eHERE\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFUEL LEVEL SWITCH \/ DIAGNOSTIC INDICATOR\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 20-069X-XX FCST comes standard with a 2AN ORB plug in the \"level switch\" port. This little device provides a warning when the fuel level inside surge tank canister drops by 20% or more. For more information on adding a fuel level switch and diagnostic indicator, click \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Level-Switch-and-Diagnostic-Indicator-P1686.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Level-Switch-and-Diagnostic-Indicator-P1686.aspx\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNOTE: RADIUM DOES NOT OFFER A WARRANTY ON ANY FUEL PUMPS! FUEL PUMPS CAN BE RETURNED IN UNUSED CONDITION WITHIN 30 DAYS OF PURCHASE. SEE TERMS AND CONDITIONS FOR MORE INFORMATION.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39501857226819,"sku":"TBS-df30893b2f","price":664.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-069X-XX.jpg?v=1703122277"},{"product_id":"submersible-rubber-fuel-hose","title":"Submersible Rubber Fuel Hose","description":"\u003cp data-mce-fragment=\"1\"\u003ePRICED BY THE FOOT\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis fluoroelastomer (FKM) rubber hose is found in many Radium fuel system products. It is designed specifically to handle gasoline, alcohol fuels (including E85), and diesel fuel in fully immersed, mobile, stationary, and marine applications. Unlike typical EFI hose, this is engineered for constant contact with liquid petroleum distillates on the inside and outside of this hose. It is excellent for fuel pumps mounted in gas tanks and has great flexibility to work with barbs and hose clamps.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 7.5mm ID (inner diameter) hose is great for 5\/16\" barbs such as those found on Walbro 255 style fuel pumps. The outside diameter is 13.4 (+\/-0.2mm).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 8.5mm ID (inner diameter) hose is great for 3\/8\" barbs such as the Walbro F90000267 and F90000274 (E85) fuel pumps. The outside diameter is 13.8 (+\/-0.2mm).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eCompatible hose clamps can be found\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Hose-Clamps-P894.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Hose-Clamps-P894.aspx\"\u003eHERE.\u003c\/a\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/PCV_Hose.jpg\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/PCV_Hose.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMeets or exceeds SAE J30R10 specifications. The maximum temperature is 302F (150C), working pressure is 300psi max, and burst pressure is 500psi. \u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eHOW TO ORDER:\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEnter the amount of feet required in the Quantity box. Please round to the nearest foot (decimals not allowed).\u003cbr data-mce-fragment=\"1\"\u003eUnits Conversion: 1ft = 12in = 30.5cm = 305mm\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eExamples \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eQuantity: 1, Radium will provide 1 foot of fuel hose in the size you have selected.\u003cbr data-mce-fragment=\"1\"\u003eQuantity: 6, Radium will provide 6 feet of fuel hose in the size you have selected. \u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"7.5mm","offer_id":39501902905411,"sku":"TBS-a99c5ff5b3","price":18.95,"currency_code":"USD","in_stock":false},{"title":"8.5mm","offer_id":39501902938179,"sku":"TBS-a99c5ff5b4","price":18.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/submersible1.jpg?v=1703122278"},{"product_id":"fuel-surge-tank-o-ring-service-kits","title":"Fuel Surge Tank O-Ring Service Kits","description":"\u003cdiv class=\"header\"\u003e\n\u003ch2\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e20-0087\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThe 20-0087 O-ring Service Kit is compatible with both new and old style \"standard\" (4\" OD) fuel surge tanks (FST and FST-R).\u003cbr\u003eINCLUDES:\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e-Small O-rings for M5 bolts (x16)\u003cbr\u003e-Large O-rings for older style FST (x2)\u003cbr\u003e-Gaskets for newer style FST (x2) \u003cstrong\u003e\u003c\/strong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0087.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e20-0088\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThe 20-0088 O-Ring Service Kit is for the large (6\" OD) surge tank canisters.\u003cbr\u003eINCLUDES:\u003cbr\u003e-Large gaskets for canister lids (x2)\u003cbr\u003e\u003cstrong\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/MPFST_ORINGS.jpg\" alt=\"\" width=\"599\" height=\"400\"\u003e\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"customFieldsWrapper\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39518987092035,"sku":null,"price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0087.jpg?v=1703122340"},{"product_id":"fuel-level-switch-and-diagnostic-indicator","title":"Fuel Level Switch and Diagnostic Indicator","description":"\u003cdiv class=\"header\"\u003e\n\u003ch2\u003e\u003ca id=\"ctl00_ctl00_NestedMaster_PageContent_ctl00_ProductDescription1_link_InstructionsUrl\" href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0202.PDF\" style=\"font-size: medium; color: #00ff00;\" target=\"_blank\"\u003eClick here to download installation instructions (PDF)\u003c\/a\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003cstrong\u003eThis switch is only compatible with the Radium Multi-Pump Fuel Surge Tanks (MPFST) and the Radium Fuel Cell Surge Tanks (FCST).  Both of these products have specially machined ports that are labeled \"Level Switch\".\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003e20-0461 Fuel Level Switch, 1\/8 NPT\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis 1\/8\" NPT fuel level switch should be installed inside the container, as shown below. \u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/MPFSTG2_9.jpg\" alt=\"\"\u003e\u003cbr\u003eWhen fuel level drops, a switched signal can be sent to a unit such as a dashboard mounted indicator or programmable ECU input for safety purposes. The level switch is constructed of corrosion resistant stainless steel compatible with all fuel types. It includes 24\" long, 20AWG flying leads.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0461.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003e1. Polarity can easily be reversed by removing the E-clip and flipping the float.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003e 2. 1\/8\" NPT threaded port is required for installing.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003e3. Always apply PTFE thread sealant to tapered pipe threads. \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e20-0508 Fuel Level Diagnostic Indicator\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eIf the 20-0461 Fuel Level Switch (above) is used, this 20-0508 Fuel Level Diagnostic Indicator can be used as a visual reference for fuel level.\u003cbr\u003e\u003cimg src=\"..\/..\/Assets\/ProductDesc\/MPFSTG2_8.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003cbr\u003eWhen the fuel level switch is triggered, the signal is sent directly to this LED.\u003cbr\u003e\u003cimg src=\"..\/..\/Assets\/ProductDesc\/MPFSTG2_4.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003cbr\u003eWhile often not practical to be viewed while driving, this indicator can be used for diagnosing a potential fueling issue.\u003cbr\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003e\u003cimg src=\"..\/..\/Assets\/ProductDesc\/FLSvid.gif\" alt=\"\" width=\"360\" height=\"202\"\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eThe 20-0508 kit includes the parts shown below. Soldering is required.\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0508.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eNOTES:\u003cbr\u003e1. A 2AN ORB (5\/16\"-24) threaded port is required for installing.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003e2. If stacking on top of the fuel level switch (as pictured above) the panel thickness must be 0.75\" minimum.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e20-0519 Fuel Level Switch Plus Indicator\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThis kit simply combines 20-0461 and 20-0508. For more information, see above.\u003cstrong\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0519.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"customFieldsWrapper\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39518987157571,"sku":null,"price":28.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0519.jpg?v=1703122339"},{"product_id":"fuel-tank-bulkhead-fittings","title":"Fuel Tank Bulkhead Fittings","description":"\u003cdiv class=\"header\"\u003e\n\u003ch2\u003eBright-dipped green anodized aluminum bulkhead fittings. \u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n\u003cp\u003eNOTES:\u003cbr\u003e-The 20-0170 6AN ORB with 8.5mm Barb to 6AN Male Bulkhead Fitting was introduced in Radium Fuel Surge Tanks after 2014. It includes a preassembled Viton O-ring and requires a 6AN ORB (9\/16-18 threaded hole) with SAE chamfer to be drilled into the mating part for sealing.\u003cbr\u003e-The 20-0196 10AN ORB with 5\/8\" Barb to 10AN Male Bulkhead Fitting was introduced in Radium High Volume Fuel Surge Tanks in 2015. It includes a preassembled Viton O-ring and requires a 10AN ORB (7\/8-14 threaded hole) with SAE chamfer to be drilled into the mating part for sealing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"customFieldsWrapper\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"6AN ORB with 8.5mm Barb to 6AN Male Bulkhead","offer_id":39518990762051,"sku":null,"price":18.95,"currency_code":"USD","in_stock":false},{"title":"10AN ORB with 5\/8in Barb to 10AN Male Bulkhead","offer_id":39518990794819,"sku":null,"price":18.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0170.jpg?v=1703122339"},{"product_id":"fuel-surge-tanks-for-external-pumps","title":"Fuel Surge Tanks for External Pumps","description":"\u003cdiv class=\"header\"\u003e\n\u003ch2\u003e\u003ca id=\"ctl00_ctl00_NestedMaster_PageContent_ctl00_ProductDescription1_link_InstructionsUrl\" href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0060C.PDF\" style=\"font-size: medium; color: #00ff00;\" target=\"_blank\"\u003eClick here to download installation instructions (PDF)\u003c\/a\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/ACEriGn0PKw\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eA fuel surge tank (FST) is designed to prevent fuel starvation to the engine on vehicles with inadequate fuel tank baffling. The FST fuel pump(s) feed the fuel rail(s). The volume of fuel inside the surge tank acts as a buffer to always keep the FST pump supplied with fuel. This volume is maintained by the main fuel tank's pump as well as the fuel returning from the fuel pressure regulator. Excess fuel in the surge tank is returned back to the vehicle's main fuel tank.\u003c\/p\u003e\n\u003cp\u003eThe surge tank also provides a quick and easy way to upgade any standard fuel system with a compact size. This is an excellent fueling solution for vehicles installing large demand power upgrades such as forced induction. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eAll RADIUM FSTs Include:\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e-Extruded and Machined 6061 Aluminum Canister \u003cbr\u003e-Removeable O-Ring Sealed Billet 6061 Aluminum Caps  \u003cbr\u003e-Anodized and Laser Engraved  \u003cbr\u003e-6AN Fittings (8AN can be purchased separately \u003ca href=\"https:\/\/www.radiumauto.com\/6AN-ORB-Fittings-P837.aspx\"\u003eHERE\u003c\/a\u003e for standard FST and \u003ca href=\"https:\/\/www.radiumauto.com\/8AN-ORB-Fittings-P479.aspx\"\u003eHERE\u003c\/a\u003e for HVFST) \u003cbr\u003e-Stainless Steel Hardware \u003cbr\u003e-Lifetime Warranty on all Radium components\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFST for External Fuel Pumps\u003c\/h3\u003e\n\u003cp\u003eRadium Engineering \"pumpless\" FSTs were designed for users that already have a secondary external fuel pump. It provides a reservoir from which an external pump can draw from. It features a single or dual anodized PTFE pick-up tubes rather than an integrated internal fuel pump. These surge tanks are most effective when mounted vertically, however it can be tipped up to a 45 degree angle. Radium does not recommend mounting these surge tanks horizontally, as the pick-up may be prone to drawing in air pockets.\u003cbr\u003e\u003cbr\u003eThe High Volume fuel surge tank (HVFST) is an ideal option for very high flow external fuel pumps requiring a large reservoir and feed line. It must be mounted as near vertical as possible. A mounting bracket is not needed with the HVFST.\u003cbr\u003e\u003cbr\u003eAll external pump fuel surge tanks require a \"lift pump\" to supply them with fuel. Excess fuel is then routed back to the OEM fuel tank or fuel cell. The pump feeding the engine, then draws it's fuel from the surge tank, with excess returning from the regulator back to the surge tank.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe single pumpless fuel surge tank features a single pick-up tube (20-0016) as shown below:\u003cbr\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/product-7662.jpg?ts=024502\" alt=\"\" width=\"599\" height=\"400\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe dual-pumpless fuel surge tank features two internal pick-up tubes (20-0028) as shown below:\u003cbr\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/product-7669.jpg?ts=024552\" alt=\"\" width=\"599\" height=\"400\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe 20-0081 HVFST uses a larger canister (2.2liters \/ 0.58gallons). Instead of 3\/8\" (-6AN), it uses a single 5\/8\" (-10AN) pick-up tube in the center, as shown below.\u003cbr\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/product-7004.jpg?ts=085653\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003cbr\u003eThe 3 black ports are used for fuel entering and exiting the surge tank. The High Volume Fuel Surge Tank includes three -6AN male fittings. However, if -8AN and\/or -10AN port fittings are required (shown below), they can be purchased separately \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Rail-and-MPFST-Fittings-P479.aspx\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/product-7007.jpg?ts=090231\" alt=\"\" width=\"599\" height=\"400\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eMounting Options (Excluding HVFST):\u003c\/h2\u003e\n\u003cp\u003eThe fuel surge tank can be mounted near the main fuel tank or in the engine bay. Mounting locations near heat sources or moving parts such as suspension components should be avoided. It should also be mounted away from common collision areas. \u003cbr\u003eChoose a bracket below that best fits your mounting needs.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloor and Wall Moun\u003c\/strong\u003et - This bracket is laser cut from aluminum and powder coated black and can be mounted on the side or bottom of the surge tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrame Mount\u003c\/strong\u003e - Because this bracket has a 90deg formed bend and is cantilevered, it is constructed from steel for superior strength. It is not only nickel plated to resist corrosion, it also allows for components to be grounded to the spare hole in the bracket. This assumes the bracket is mounted to an electrically conductive material such as a steel frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAngled Mount\u003c\/strong\u003e - This mounting bracket is used for vehicles that may have a limited mounting height. It can be mounted on a floor and against a wall. This bracket is made from laser cut aluminum and powder coated black.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/FST_DIMENSIONS.PDF\"\u003eCLICK HERE FOR MOUNTING DIMENSIONS\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"customFieldsWrapper\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39518990827587,"sku":"20-0081","price":419.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/product-7005.jpg?v=1703122339"},{"product_id":"dual-external-pump-fuel-surge-tanks","title":"Dual External Pump Fuel Surge Tanks","description":"\u003cdiv class=\"header\"\u003e\n\u003ch2\u003e\u003ca id=\"ctl00_ctl00_NestedMaster_PageContent_ctl00_ProductDescription1_link_InstructionsUrl\" href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0013D.pdf\" style=\"font-size: medium; color: #00ff00;\" target=\"_blank\"\u003eClick here to download installation instructions (PDF)\u003c\/a\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan\u003eRADIUM DOES NOT OFFER A WARRANTY ON ANY FUEL PUMPS! FUEL PUMPS CAN BE RETURNED WITHIN 30 DAYS OF PURCHASE. SEE TERMS AND CONDITIONS FOR MORE INFORMATION.\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/ACEriGn0PKw\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eA fuel surge tank (FST) is designed to prevent fuel starvation to the engine on vehicles with inadequate fuel tank baffling. The FST fuel pumps feed the fuel rail(s). The volume of fuel inside the surge tank acts as a buffer to always keep the FST pump supplied with fuel. This volume is maintained by the main fuel tank's pump as well as the fuel returning from the fuel pressure regulator. Excess fuel in the surge tank is returned back to the vehicle's main fuel tank.\u003c\/p\u003e\n\u003cp\u003eThe surge tank also provides a quick and easy way to upgade any standard fuel system with a compact size. This is an excellent fueling solution for vehicles installing large demand power upgrades such as forced induction. \u003c\/p\u003e\n\u003cp\u003eBoth of these dual-pump configurations are ideal for high powered V or H configured engines with dual fuel rails. The anodized 6061 billet aluminum clamps and FST mount directly to the powder coated aluminum plate using stainless countersink bolts. Unlike others on the market, these clamps conductively transfer the fuel pumps thermal energy to the chassis increasing fuel pump longevity. Each pump has a dedicated vapor shield hose that draws fuel from the bottom of the FST. \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/dh2.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eIncludes\u003c\/h3\u003e\n\u003cp\u003e-Machined 6061 Aluminum 1.5 Liter Canister \u003cbr\u003e-Removeable Billet 6061 Aluminum Caps    \u003cbr\u003e-6AN Male Fittings (8AN can be purchased separately \u003ca href=\"https:\/\/www.radiumauto.com\/6AN-ORB-Fittings-P837.aspx\"\u003eHERE\u003c\/a\u003e)\u003cbr\u003e-Adapter Fittings for specified Fuel Pumps\u003cbr\u003e -Billet Aluminum Pump Clamps\u003cbr\u003e-Aluminum Mounting Bracket\u003cbr\u003e-Stainless Steel Hardware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo purchase Bosch 0 580 254 044 fuel pumps, click \u003ca href=\"http:\/\/www.radiumauto.com\/Bosch-0-580-254-044-Fuel-Pump-P364.aspx\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003e\u003cstrong\u003eNOT COMPATIBLE WITH AEM 50-1005 or DW350iL pumps.\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003e20-0052-00 Fuel Surge Tank, Dual External Bosch 0 580 254 044, Horizontal, Pumps Not Included\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis FST is only 4 inches tall which is ideal for many applications. Hose-ends and E85 compatible hose is included to connect the pump inlets to the surge tank ports.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0052_B.jpg\" alt=\"\"\u003e\u003cbr\u003eThe 2 fuel pump pickups are located at the bottom of the FST. The top port is used for the fuel return back to the main tank.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: medium;\"\u003e\u003cstrong\u003e\u003cspan\u003e20-0021-00 Fuel Surge Tank, Dual External Bosch 0 580 254 044, Vertical, Pumps Not Included\u003c\/span\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis FST includes pickup tubes that draw fuel from the bottom of the FST. \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/product-7669.jpg?ts=024552\" alt=\"\" width=\"600\" height=\"400\"\u003e \u003cbr\u003eEach pickup is dedicated to the respective external fuel pump. This enables all of the fittings to be secured to the top cap making for a nice compact plumbing package. \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/prod_pic-2900.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eOptions\u003c\/h3\u003e\n\u003cp\u003eWhen plumbing a single hose to the engine, Radium Engineering offers 20-0063. This is a machined aluminum 4-port manifold (shown below) that merges the fuel pump outlets together into a single AN fitting. All required fittings are included, along with -8AN and -10AN outlet adapters.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/prod_pic-3760.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003cbr\u003eThere is also 20-0463 which retains the Bosch check valves (see picture above). This is necessary if the two fuel pumps will be staged.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eUsed by professional motorsports teams worldwide:\u003cbr\u003e\u003ca href=\"http:\/\/www.flickr.com\/photos\/radiumengineering\/sets\/72157631877842400\/\" target=\"_blank\"\u003ehttp:\/\/www.flickr.com\/photos\/radiumengineering\/sets\/72157631877842400\/\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/FST_DIMENSIONS.PDF\"\u003eCLICK HERE FOR MOUNTING DIMENSIONS\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"customFieldsWrapper\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39518991319107,"sku":null,"price":503.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/prod_pic-2900.jpg?v=1703122339"},{"product_id":"fst-fuel-surge-tank-standard","title":"FST, Fuel Surge Tank, Standard","description":"\u003cdiv class=\"header\"\u003e\n\u003ch2\u003e\u003ca id=\"ctl00_ctl00_NestedMaster_PageContent_ctl00_ProductDescription1_link_InstructionsUrl\" href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0040G.PDF\" style=\"font-size: medium; color: #00ff00;\" target=\"_blank\"\u003eClick here to download installation instructions (PDF)\u003c\/a\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: small;\"\u003eRADIUM DOES NOT OFFER A WARRANTY ON ANY FUEL PUMPS! SEE TERMS AND CONDITIONS FOR MORE INFORMATION.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/ACEriGn0PKw\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eA fuel surge tank (FST) is designed to prevent fuel starvation to the engine on vehicles with inadequate fuel tank baffling. The FST fuel pump(s) directly feed the fuel rail(s). The volume of fuel inside the surge tank acts as a buffer to always keep the FST pump supplied with fuel. This volume is maintained by the main fuel tank's pump as well as the fuel returning from the fuel pressure regulator. Excess fuel in the surge tank is returned back to the vehicle's main fuel tank.\u003c\/p\u003e\n\u003cp\u003eThe surge tank also provides a quick and easy way to upgade any standard fuel system without the need to modify the stock fuel tank or pump. This is an excellent fueling solution for vehicles installing large fuel demand power upgrades such as forced induction.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eAll Fuel Surge Tanks Include:\u003c\/h3\u003e\n\u003cp\u003e-Extruded and Machined Aluminum 1.5 Liter Canister \u003cbr\u003e-Bright Dipped Anodized and Laser Engraved Housing\u003cbr\u003e-Removeable O-Ring Sealed Billet Aluminum Caps  \u003cbr\u003e-6AN O-Ring Fittings (8AN can be purchased separately \u003ca href=\"https:\/\/www.radiumauto.com\/6AN-ORB-Fittings-P837.aspx\"\u003eHERE\u003c\/a\u003e)\u003cbr\u003e-Circular Bulkhead Electrical Connector with 24\" Flying Leads\u003cbr\u003e-Corrosive Resistant Stainless Steel Hardware\u003c\/p\u003e\n\u003cp\u003eAll pumps mount internally using gasoline, ethanol, and methanol resistant wiring. For dual-pump configurations, each pump is wired independently. All hoses are submersible and E85 safe.\u003cstrong\u003e \u003c\/strong\u003eThe pump outlet fitting(s) are available in -6AN male size only (shown in green).\u003cstrong\u003e \u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/product-7038.jpg\" alt=\"\" width=\"599\" height=\"400\"\u003e\u003cbr\u003e\u003c\/strong\u003eThe other ports can be adapted to other -AN sizes using adapters (sold separately).\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eHow to Select Your Fuel Surge Tank Configuration\u003c\/h3\u003e\n\u003cp\u003eDetermine if your application will require one or two pumps. This is based on determining how much fuel flow the engine will need. Next, decide if the pump(s) will be purchased through Radium Engineering (pump included) or elsewhere (pump not included).  Use the drop-down menu to make your selection. \u003cem\u003eNOTE: When pump(s) are included, the FST comes fully asssembled and is ready to be installed in the vehicle. When purchasing without pumps, use the included instructions and\/or this video \u003ca href=\"https:\/\/www.youtube.com\/watch?v=l_UUhanef10\"\u003eHERE\u003c\/a\u003e to aid in the assembly. \u003c\/em\u003eNext, select the fuel pump model that will be used from the options shown\u003cspan\u003e. If you are unsure which pump will be best for the application, \u003ca style=\"font-size: small;\" href=\"http:\/\/radiumauto.com\/media\/techarticle-page.php?Radium-s-Ultimate-Fuel-Pump-Test-87\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e for an unbiased performance test of some of the fuel pumps we offer. \u003c\/span\u003e\u003ca href=\"http:\/\/radiumauto.com\/media\/techarticle-page.php?Fuel-Pump-Identification-90\" target=\"_blank\"\u003eCLICK HERE \u003c\/a\u003efor a easy to read side-by-side comparison of all the fuel pumps we offer.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eWalbro GSS342 255LPH Pump\u003cbr\u003e\u003c\/strong\u003eThis FST can be configured for single or dual pumps. For single pump FSTs, the fuel entering must be filtered. For a triple pump FST using these pumps, please go to the Radium \u003ca href=\"http:\/\/www.radiumauto.com\/Multi-Pump-Fuel-Surge-Tank-P271.aspx\"\u003eMultipump FST\u003c\/a\u003e page. Shown below is the dual pump variation.\u003cbr\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/20160430-DSC_0021.jpg?ts=093948\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eWalbro F90000274 E85 Pump\u003c\/strong\u003e\u003cbr\u003eThis surge tank comes in a single pump version only. Please check out the Radium \u003ca href=\"http:\/\/www.radiumauto.com\/Walbro-F90000262-and-F90000267-Equipped-FSTs-P279.aspx\"\u003eMultipump FST\u003c\/a\u003e if more than 1 pump is required. Shown below is the internal structure of this surge tank (shown without the canister).\u003cbr\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/product-7024.jpg?ts=095704\" alt=\"\" width=\"600\" height=\"400\"\u003e \u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAEM 50-1200 E85 Pump\u003cbr\u003e\u003c\/strong\u003eThis FST can be configured for single or dual pumps. For single pump FSTs, the fuel entering must be filtered. For a triple pump FST using these pumps, please go to the Radium \u003ca href=\"http:\/\/www.radiumauto.com\/Multi-Pump-Fuel-Surge-Tank-P271.aspx\"\u003eMultipump FST\u003c\/a\u003e page. Shown below is the dual pump variation.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/20160430-DSC_0019.jpg?ts=094349\" alt=\"\" width=\"600\" height=\"400\"\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cstrong\u003eDeatschwerks DW400 9-401 Pump\u003c\/strong\u003e\u003cbr\u003eThis surge tank comes in a single version only. To purchase the DW400 9-401 fuel pump, go \u003ca href=\"https:\/\/www.deatschwerks.com\/dw400-series-fuel-pump-fitment-kits\"\u003eHERE\u003c\/a\u003e. NOTE: The Bosch equivalent (P\/N: BR540) does NOT have an integrated check valve.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0257-00.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003cbr\u003e\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTi Automotive E5LM Brushless Pump\u003c\/strong\u003e\u003cbr\u003eThis FST requires a\u003cstrong\u003e \u003c\/strong\u003eTi Automotive E5LM brushless pump and fuel controller to operate. See\u003cstrong\u003e \u003ca href=\"http:\/\/www.radiumauto.com\/Ti-Automotive-BKS1000-Brushless-Pump-and-Controller-Kit-P1694.aspx\"\u003eTi Automotive BKS1000\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003eNOTE: This pump does not have an integrated check valve.\u003cbr\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/product-7032.jpg?ts=073614\" alt=\"\" width=\"599\" height=\"400\"\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eMounting Hardware\u003c\/h3\u003e\n\u003cp\u003eThe fuel surge tank can be mounted anywhere in the vehicle. However, mounting near collision prone areas, heat sources, or moving parts such as suspension components should be avoided. Note: All of the single pump FSTs listed above can be mounted anywhere from vertical to horizontal. However, the dual pump FSTs cannot be mounted completely horizontal because the pickups are on opposing sides of one another internally. Choose a bracket below that best fits the application.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"..\/..\/Assets\/productDESC\/FSTmounts.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloor and Wall Moun\u003c\/strong\u003et - This bracket is laser cut from aluminum and powder coated black and can be mounted on the side or bottom of the surge tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrame Mount\u003c\/strong\u003e - Because this bracket has a 90deg formed bend and is cantilevered, it is constructed from steel for superior strength. It is not only nickel plated to resist corrosion, it also allows for components to be grounded to the spare hole in the bracket. This assumes the bracket is mounted to an electrically conductive material such as a steel frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAngled Mount\u003c\/strong\u003e - This mounting bracket is used for vehicles that may have a limited mounting height. It can be mounted on a floor and against a wall. This bracket is made from laser cut aluminum and powder coated black.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/FST_DIMENSIONS.PDF\"\u003eCLICK HERE FOR MOUNTING DIMENSIONS\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"customFieldsWrapper\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39518991450179,"sku":null,"price":379.95,"currency_code":"USD","in_stock":true}]},{"product_id":"mpfst-multi-pump-fuel-surge-tank","title":"MPFST, Multi-Pump Fuel Surge Tank","description":"\u003cdiv class=\"header\"\u003e\n\u003ch2\u003e\u003ca style=\"font-size: medium; color: #00ff00;\" href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0202B.PDF\" id=\"ctl00_ctl00_NestedMaster_PageContent_ctl00_ProductDescription1_link_InstructionsUrl\" target=\"_blank\"\u003eClick here to download installation instructions (PDF)\u003c\/a\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/MPFST12.pdf\" target=\"_blank\"\u003eClick here for mounting dimensions (PDF)\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"font-size: medium; color: #00ff00;\"\u003e\u003cspan style=\"color: #00ff00;\"\u003e\u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/MPFST_dwg_-_Sheet12.pdf\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003cspan style=\"font-size: xx-small;\"\u003e\u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0052F.PDF\"\u003eClick here to download the Gen1 MPFST instructions (PDF)\u003cbr\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: small;\"\u003eRADIUM DOES NOT OFFER A WARRANTY ON ANY FUEL PUMPS! FUEL PUMPS CAN BE RETURNED IN UNUSED CONDITION WITHIN 30 DAYS OF PURCHASE. SEE TERMS AND CONDITIONS FOR MORE INFORMATION.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e**Need help selecting which fuel pump configuration? \u003ca href=\"https:\/\/www.radiumauto.com\/Blog\/Post\/Selecting-Surge-Tank-Fuel-Pumps-101\" target=\"_blank\"\u003eREAD THIS\u003c\/a\u003e**\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eWhat is a fuel surge tank?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eA fuel surge tank (FST) is designed to prevent fuel starvation to the engine on vehicles with inadequate fuel tank baffling. Fuel is supplied to the surge tank by a lift pump, which in most cases is the OEM in-tank fuel pump.  The volume of fuel inside the surge tank acts as a buffer to always keep the FST pump(s) supplied with fuel, even if the lift pump starves momentarily. This volume is maintained by the lift pump as well as the fuel returning from the fuel pressure regulator. Excess fuel in the surge tank is returned back to the vehicle's main fuel tank. The surge tank also provides a quick and easy way to upgade any standard fuel system without opening the stock fuel tank. This is an excellent fueling solution for vehicles installing large demand power upgrades such as forced induction. For more information on how a fuel surge tank works, \u003ca href=\"https:\/\/www.youtube.com\/watch?v=ACEriGn0PKw\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eMulti-Pump Fuel Surge Tank (MPFST)\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eRecently redesigned for 2019, the Radium Engineering MPFST is the perfect solution for high power vehicles experiencing fuel starvation during aggressive driving. Multiple high flowing fuel pumps can be used in the surge tank.\u003cbr\u003e\u003cimg height=\"400\" width=\"600\" alt=\"\" src=\"https:\/\/www.radiumauto.com\/Assets\/ProductDESC\/MPFSTG2_2.jpg\"\u003e\u003cbr\u003eBecause the compatible pumps utilize a check valve, the MPFST merges all pumps into a single outlet simplifying external plumbing. NOTE: The brushless Ti Automotive E5LM MPFST includes check valves (shown below in green).\u003cbr\u003e\u003cimg alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0443-00_Internal-c.jpg\"\u003e\u003cbr\u003eThis \"PUMP OUT\" port is 10AN ORB threaded but comes preinstalled with a -8AN male adapter fitting. The \"OVERFLOW\", \"SUPPLY\", and \"RETURN\" ports are all 8AN ORB threaded but come preinstalled with -6AN male adapter fittings. All of these fittings can be swapped out with different sizes (sold separately).\u003cbr\u003e\u003cimg alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/MPFSTTopPlate.jpg\"\u003e\u003cbr\u003eThe brushless Ti Automotive E5LM MPFST pump outlet merge collector shown below.\u003cbr\u003e\u003cimg alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0443-00_E5LM-b.jpg\"\u003e\u003cbr\u003eWhen fuel enters the MPFST through the \"SUPPLY\" and \"RETURN\" ports, it gets redirected and runs tangential through the canister creating a swirl pot. This helps eliminate unwanted air bubbles and fuel foam that can affect fuel pump and engine performance. \u003cbr\u003e\u003cimg alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0443-00_Internal-a.jpg\"\u003e\u003cbr\u003eThe pumps are mounted using an anodized aluminum bracket. All internal wires are gasoline, ethanol, and methanol compliant. The brushless Ti Automotive E5LM MPFST (shown above) utilizes a standard press-in filter sock included commonly with the pump (or \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Pump-Inlet-Filter-Socks-P448.aspx\"\u003eHERE\u003c\/a\u003e).\u003cbr\u003e\u003cimg height=\"400\" width=\"600\" alt=\"\" src=\"https:\/\/www.radiumauto.com\/Assets\/ProductDESC\/MPFST738.jpg\"\u003e\u003cbr\u003eAll other (brushed pumps) pumps use the provided stainless steel mesh inlet screen for pre pump filtration shown above.\u003cbr\u003e\u003cimg height=\"400\" width=\"600\" alt=\"\" src=\"..\/..\/Assets\/ProductDESC\/MPFSTelec.jpg\"\u003e\u003cbr\u003eThe pump power connections are handled with specially designed high-current electrical studs. Necessary ring terminals and hardware are included with every surge tank.\u003cbr\u003e\u003cimg height=\"400\" width=\"599\" alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/product-8783.jpg\"\u003e\u003cbr\u003eAs shown, the underside of the MPFST is suitable for uneven surfaces commonly found in the trunk of a vehicle. Stainless steel M6x1.0mm socket head bolts are included for custom mounting.\u003cimg alt=\"\" src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/MPFSTMountingFeetBolts.jpg?ts=051728\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003ePUMP SELECTION\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eThe MPFST can be selected with or without fuel pumps installed. If the option \"... Pumps Not Included\" is selected, the MPFST comes ready for the end user to install 1, 2, or 3 pumps. NOTE: The brushless Ti Automotive E5LM MPFST is designed for 1 or 2 pumps (shown below). Brushless pumps available \u003ca href=\"http:\/\/www.radiumauto.com\/Ti-Automotive-BKS1000-Brushless-Pump-and-Controller-P1694.aspx\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003e\u003cimg alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0443-00.jpg\"\u003e\u003cbr\u003eIf the option \"...Pumps Included\" is selected, the MPFST comes pre-assembled with the pumps and is ready to be installed into the vehicle.\u003cbr\u003e\u003cimg height=\"400\" width=\"600\" alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/MPFSTG2_6.jpg\"\u003e\u003cbr\u003eIf a single pump is required, please see our other FSTs available in the store, or select the \"Pumps Not Included\" configuration above. Information is provided \u003ca href=\"http:\/\/www.radiumauto.com\/Blog\/Post\/Fuel-Pumps-Used-by-Radium-Engineering-97\"\u003eHERE\u003c\/a\u003e on the fuel pumps offered by Radium Engineering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eOPTIONS \u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e20-0461 Fuel Level Switch, 1\/8 NPT\u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eThe Multi-Pump Fuel Surge Tank comes standard with a 2AN ORB plug in the \"level switch\" port, as shown below. \u003cbr\u003e\u003cimg alt=\"\" src=\"..\/..\/Assets\/ProductDesc\/MPFSTG2_3.jpg\"\u003e\u003cbr\u003eWhen the plug is unscrewed, this 1\/8\" NPT fuel level switch can be installed from underneath, as shown below. \u003cbr\u003e\u003cimg alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/MPFSTG2_9.jpg\"\u003e\u003cbr\u003eWhen fuel level in the MPFST drops by 20% or more, a switched signal can be sent to a unit such as a dashboard mounted indicator or programmable ECU input for safety purposes.\u003cbr\u003e\u003cimg alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0461.jpg\"\u003e\u003cbr\u003eThe level switch is constructed of corrosion resistant stainless steel compatible with all fuel types. It includes 24\" long, 20AWG flying leads. Polarity can easily be reversed by removing the E-clip and flipping the float. Apply PTFE thread sealant to the tapered 1\/8\" NPT threads when installing.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e20-0519 Fuel Level Switch Plus Diagnostic Indicator\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eIf the 20-0519 Fuel Level Switch Plus Diagnostic Indicator can be used as a visual reference for fuel level.\u003cbr\u003e\u003cimg height=\"400\" width=\"600\" alt=\"\" src=\"..\/..\/Assets\/ProductDesc\/MPFSTG2_8.jpg\"\u003e\u003cbr\u003eWhen the fuel level switch is triggered, the signal is sent directly to the LED.\u003cbr\u003e\u003cimg height=\"400\" width=\"600\" alt=\"\" src=\"..\/..\/Assets\/ProductDesc\/MPFSTG2_4.jpg\"\u003e\u003cbr\u003eWhile often not practical to be viewed while driving, the indicator can be used for diagnosing a potential fueling issue.\u003cbr\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003e\u003cimg height=\"202\" width=\"360\" alt=\"\" src=\"..\/..\/Assets\/ProductDesc\/FLSvid.gif\"\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e20-0519 includes all of the items shown in the following picture.\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0519.jpg\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cstrong\u003eNOTE: To purchase the diagnostic indicator by itself, click this link \u003cstrong\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Level-Switch-and-Diagnostic-Indicator-P1686.aspx\"\u003e20-0508 Fuel Level Diagnostic Indicator\u003c\/a\u003e. But know that the 20-0461 fuel level switch is necessary for the diagnostic indicator to work.\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"customFieldsWrapper\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39518991581251,"sku":null,"price":503.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/MPFSTG2_1.jpg?v=1703122343"},{"product_id":"fst-r-fuel-surge-tank-with-integrated-fpr","title":"FST-R, Fuel Surge Tank with Integrated FPR","description":"\u003cdiv class=\"header\"\u003e\n\u003ch2\u003e\u003ca id=\"ctl00_ctl00_NestedMaster_PageContent_ctl00_ProductDescription1_link_InstructionsUrl\" href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0061K.PDF\" style=\"font-size: medium; color: #00ff00;\" target=\"_blank\"\u003eClick here to download installation instructions (PDF)\u003c\/a\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: small;\"\u003e\u003ca style=\"font-size: small;\" href=\"http:\/\/www.flickr.com\/photos\/radiumengineering\/sets\/72157631877842400\/\"\u003eCLICK HERE TO SEE EXAMPLES OF INSTALLED RADIUM FUEL SURGE TANKS\u003cbr\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca style=\"font-size: small;\" href=\"http:\/\/data.radiumauto.com\/PublicDocs\/FST_DIMENSIONS.PDF\"\u003eCLICK HERE FOR MOUNTING DIMENSIONS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cbr\u003e Click below for a video on how a Radium fuel surge tank works\u003c\/span\u003e:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/ACEriGn0PKw\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eRADIUM DOES NOT OFFER A WARRANTY ON ANY FUEL PUMPS! FUEL PUMPS CAN BE RETURNED IN UNUSED CONDITION WITHIN 30 DAYS OF PURCHASE. SEE TERMS AND CONDITIONS FOR MORE INFORMATION.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eA fuel surge tank (FST) is designed to prevent fuel starvation to the engine on vehicles with inadequate fuel tank baffling. The FST fuel pump feeds the fuel rail(s). The volume of fuel inside the surge tank acts as a buffer to always keep the FST pump supplied with fuel. This volume is maintained by the main fuel tank's (lift) pump as well as the fuel returning from the fuel pressure regulator.\u003c\/p\u003e\n\u003cp\u003eIn the case of the FST-R, the regulator is built in to the surge tank and is recirculating fuel internally. Excess fuel in the surge tank is returned back to the vehicle's main fuel tank.\u003c\/p\u003e\n\u003cp\u003eInstalling a surge tank is also an easy way to upgrade the fuel pump of a vehicle without opening or modifying the OEM fuel tank.\u003cspan style=\"font-size: small;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cbr\u003eNeed help selecting a fuel pump configuration for your vehicle? \u003ca href=\"http:\/\/radiumauto.com\/media\/techarticle-page.php?Radium-s-Ultimate-Fuel-Pump-Test-87\"\u003eCLICK HERE\u003c\/a\u003e for a unbiased test of popular fuel pumps.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRADIUM FST-R FEATURES\u003c\/h3\u003e\n\u003cp\u003e-Full CNC aluminum construction with O-ring sealed interfaces  \u003cbr\u003e-Anodized for compatibility with all fuel types\u003cbr\u003e-Integrated adjustable fuel pressure regulator with 1:1 vacuum reference\u003cbr\u003e-Interchangeable regulator orifice sizes to match output of different pumps\u003cbr\u003e-Nickel-Plated Electrical Connector with 24\" Flying Leads\u003cbr\u003e-Assembled with stainless steel hardware \u003cbr\u003e-Three 6AN male fittings (8AN can be purchased separately \u003ca href=\"https:\/\/www.radiumauto.com\/6AN-ORB-Fittings-P837.aspx\"\u003eHERE\u003c\/a\u003e)\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRADIUM FST-R\u003c\/h3\u003e\n\u003cp\u003eThe FST-R (Fuel Surge Tank–Regulated) is an all new design that houses a single internal fuel pump and has an integrated fuel pressure regulator machined into the top cap. The high-flow regulator is adjustable and features interchangeable orifice sizes. This revolutionary idea eliminates the need for an external fuel pressure regulator along with the extra fittings and hoses. This simplifies the installation, reduces overall cost, reduces weight, and eliminates potential leak points in the fuel system. Furthermore, this system permits cooler fuel temperatures as the fuel is not returning from the hot engine bay. Like all Radium fuel surge tanks, this universal product can be used on any fuel injected application and is compatible with all fuel types.  \u003ca href=\"http:\/\/radiumauto.com\/media\/blog-page.php?New-Product-Release-FST-R....Two-parts-in-one-83\" target=\"_blank\"\u003eAdditional details on the design of the FST-R can be found here.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eThe FST-R can be configured with all 39mm fuel pumps from many leading manufacturers. Note: The FST-R is not available in dual-pump configurations. If the pump is purchased as part of the FST-R, the surge tank will come fully assembled and will be pressure tested for leaks and ready to be installed. If the pump is purchased elsewhere, some assembly will be required. \u003cbr\u003e\u003cbr\u003ePlease see the \u003cstrong\u003eMORE DETAILS\u003c\/strong\u003e tab on this page (above) for additional info on plumbing a FST-R.\u003c\/p\u003e\n\u003cp\u003eThe side port is the regulated pressure output and is plumbed directly to the fuel rail(s). No additional fuel pressure regulator is required. Pressure adjustment is done using the adjustment screw located on the top cap of the regulator unit. A vacuum line hooks up to the nipple on the FST-R to achieve 1:1 vacuum reference. Note: returnless fuel systems commonly use a constant fuel pressure. In this case, the vacuum reference hose is not required. \u003cbr\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/product-7698.jpg?ts=011122\" alt=\"\" width=\"599\" height=\"400\"\u003e\u003cbr\u003eThe FST-R is no taller than a standard fuel surge tank with hoses installed.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"..\/..\/Assets\/productDESC\/FSTR-ORIFICE.jpg\" alt=\"\"\u003e\u003cbr\u003eTwo interchangeable orifices are included with calculated flow diameters to match the fuel pump flow to the regulator. Furthermore, this added precision will resist diaphragm flutter and optimize pressure stability.\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"..\/..\/Assets\/productDESC\/FSTRgauge1.jpg\" alt=\"\"\u003e\u003cbr\u003eA fuel pressure gauge is needed in order to set and monitor fuel pressure and should be located along on the output line or at the fuel rail. \u003ca href=\"http:\/\/www.radiumauto.com\/Universal-Fuel-Pressure-Gauge-P227.aspx\"\u003eThe Radium universal fuel pressure gauge \u003c\/a\u003eis perfect for this duty. Shown above is the gauge with the optional in-line Tee fitting.\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0368-00.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003c\/p\u003e\n\u003cp\u003eFor the 20-0368-00 Ti Automotive E5LM FST-R, a \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Pump-Outlet-Adapter-Check-Valve-P1709.aspx\"\u003e20-0598\u003c\/a\u003e check valve is included to prevent backflow, as shown above. The compatible brushless fuel pump and controller kit can be found \u003ca href=\"http:\/\/www.radiumauto.com\/Ti-Automotive-BKS1000-Brushless-Pump-and-Controller-P1694.aspx\"\u003eHERE\u003c\/a\u003e.  \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: medium;\"\u003eOPTIONAL MOUNTING BRACKETS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fuel surge tank can be mounted near the main fuel tank or in the engine bay. Mounting locations near heat sources or moving parts such as suspension components should be avoided. It should also be mounted away from common collision areas. Choose a bracket below that best fits your mounting needs.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"..\/..\/Assets\/productDESC\/FSTmounts.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloor and Wall Moun\u003c\/strong\u003et - This bracket is laser cut from aluminum and powder coated black and can be mounted on the side or bottom of the surge tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrame Mount\u003c\/strong\u003e - Because this bracket has a 90deg formed bend and is cantilevered, it is constructed from steel for superior strength. It is not only nickel plated to resist corrosion, it also allows for components to be grounded to the spare hole in the bracket. This assumes the bracket is mounted to an electrically conductive material such as a steel frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAngled Mount\u003c\/strong\u003e - This mounting bracket is used for vehicles that may have a limited mounting height. It can be mounted on a floor and against a wall. This bracket is made from laser cut aluminum and powder coated black.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"customFieldsWrapper\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39518991810627,"sku":null,"price":474.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/prod_pic-4241.jpg?v=1703122344"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/collections\/radium-template_cd430cfe-5451-46c9-b63f-9e30810063f2.png?v=1703120677","url":"https:\/\/www.tunedbyshawn.com\/collections\/radium-fuel-surge-tank.oembed?page=2","provider":"Tuned by Shawn","version":"1.0","type":"link"}