{"title":"Radium Fuel Cells","description":"","products":[{"product_id":"radium-engineering-spare-tire-fuel-cell-mounting-kit","title":"Radium Engineering Spare Tire Fuel Cell Mounting Kit","description":"\u003cp\u003eAluminum brackets for mounting the Radium Spare Tire Well Fuel Cell into a compatible vehicle.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39491016654915,"sku":"RAD20-0431","price":237.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/52dd24434782b80b29bea686a92d8506.jpg?v=1703121750"},{"product_id":"radium-engineering-fuel-collection-valve","title":"Radium Engineering Fuel Collection Valve","description":"\u003cp\u003eAnodized Aluminum Check Valve Bushing and Check Valve Body; Wear Resistant Nylon Ball\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39497523920963,"sku":"RAD20-0151","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/ebdb77a0e010677f1cbe4b443f87d5fc.jpg?v=1703122253"},{"product_id":"fuel-level-senders","title":"Fuel Level Senders","description":"\u003cspan data-mce-fragment=\"1\"\u003eThis fuel level sensor uses the standard SAE 5-bolt mounting pattern, extensively used with the \u003ca href=\"http:\/\/www.radiumauto.com\/FCST-Fuel-Cell-Surge-Tank-P1497.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/FCST-Fuel-Cell-Surge-Tank-P1497.aspx\"\u003eRadium Fuel Cell Surge Tank\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Sizes_for_Cells.jpg?ts=050633\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Sizes_for_Cells.jpg?ts=050633\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFull stainless steel sealed construction with magnetic float.\u003cbr data-mce-fragment=\"1\"\u003eResistance: 0 ohm empty, 90 ohm full\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Level_Sender.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Level_Sender.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eSuitable for use with gasoline, diesel, water, and all alcohol based fuels including methanol, ethanol, E85, etc.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0747_Installed.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0747_Installed.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTES:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-All level senders are 0 ohms empty to 90 ohms full (common with many aftermarket gauges.)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Radium does not sell fuel level gauges, but a popular option is this \u003c\/span\u003e\u003ca href=\"https:\/\/www.autometer.com\/2-fuel-level-0-e-90-f-sse-gm-65-present.html\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.autometer.com\/2-fuel-level-0-e-90-f-sse-gm-65-present.html\" target=\"_blank\"\u003eAutometer Fuel Level Gauge\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-To test the sender, measure the resistance between the two wires while tipping the sender to allow the float to move.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-If purchased with a Radium Fuel Cell Surge Tank (FCST), the sender will come pre-installed.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-If the output of this sender is not compatible with your OEM fuel gauge, consider a resistance signal converter, \u003ca href=\"https:\/\/shop.classicinstruments.com\/sn34\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/shop.classicinstruments.com\/sn34\" target=\"_blank\"\u003eFOUND HERE\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003e   (Radium Engineering does not have experience with this product, contact Classic Instruments for more information)\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Capture.PNG?ts=024711\" alt=\"\" width=\"360\" height=\"247\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Capture.PNG?ts=024711\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWHATS INCLUDED:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e-Level Sensing Probe\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-SAE 5-Bolt Gasket\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Stainless Bolts 10-32 (x5)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Deutsch DT 2P Connector\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Deutsch DT Sockets (x2)\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0747-203.jpg\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0747-203.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003ePROBE MATERIAL: 304 Stainless Steel\u003cbr data-mce-fragment=\"1\"\u003eFLOAT MATERIAL: Plastic Buna-N\u003cbr data-mce-fragment=\"1\"\u003eMOUNTING FLANGE: 5-Bolt SAE\u003cbr data-mce-fragment=\"1\"\u003eMOUNTING GASKET: FKM Viton\u003cbr data-mce-fragment=\"1\"\u003eRESISTANCE: 0 (Empty)-90 (Full) Ohms\u003cbr data-mce-fragment=\"1\"\u003ePVC WIRES: 18\" (460mm) with PA Cover\u003cbr data-mce-fragment=\"1\"\u003eCONNECTORS: Deutsch DT, 2P\u003cbr data-mce-fragment=\"1\"\u003eOPERATING TEMP: -40F to +185F\u003c\/span\u003e","brand":"Radium Engineering","offers":[{"title":"8.0in","offer_id":39501366100035,"sku":"RAD20-0747-203","price":99.95,"currency_code":"USD","in_stock":false},{"title":"11.7in","offer_id":39501366132803,"sku":"RAD20-0747-297","price":99.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0747-203.jpg?v=1703122269"},{"product_id":"universal-fuel-level-sender","title":"Universal Fuel Level Sender","description":"\u003cspan data-mce-fragment=\"1\"\u003eFloat-style fuel level sending units with standard SAE 5-bolt mounting pattern. Easy to install using the supplied hardware and Deutsch connectors (gauge not included). Fits most fuel cells and extensively used with the \u003ca href=\"http:\/\/www.radiumauto.com\/FCST-Fuel-Cell-Surge-Tank-P1497.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/FCST-Fuel-Cell-Surge-Tank-P1497.aspx\"\u003eRadium Fuel Cell Surge Tank\u003c\/a\u003e. T\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ehis rugged design features a FR4 conformal-coated PCB, epoxy potted electrical terminals, and an anodized surface finish making it suitable for use with gasoline, diesel, and all alcohol based fuels including methanol, ethanol, E85, etc.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMade here in Portland, USA.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTES:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Resistance: 0 ohms empty to 90 ohms full. This 0-90 ohm range is common with many aftermarket gauges.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Radium does not sell fuel level gauges, but a popular option is this \u003c\/span\u003e\u003ca href=\"https:\/\/www.autometer.com\/2-fuel-level-0-e-90-f-sse-gm-65-present.html\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.autometer.com\/2-fuel-level-0-e-90-f-sse-gm-65-present.html\" target=\"_blank\"\u003eAutometer Fuel Level Gauge\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-To test the sender, measure the resistance between the two wires while tipping the sender to allow the float to move.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Fuel level senders carry a 1 year warranty through Radium Engineering.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0247_3.jpg\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0247_3.jpg\"\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eALWAYS MEASURE THE INSIDE DEPTH OF THE FUEL CELL BEFORE SELECTING SENDER LENGTH.\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eElectrical:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe level sender has a resistance output curve as shown below and can be summarized as \"0 ohms empty, 90 ohms full\". This is a standard ohm range that is popular in the aftermarket.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Capture.PNG?ts=024711\" alt=\"\" width=\"360\" height=\"247\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Capture.PNG?ts=024711\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eNOTE: If the resistance output of the sender is not what is needed by your OEM fuel level gauge, consider a resitance converter, \u003c\/span\u003e\u003ca href=\"https:\/\/shop.classicinstruments.com\/sn34\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/shop.classicinstruments.com\/sn34\" target=\"_blank\"\u003eFOUND HERE\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e(Radium Engineering does have experience with this product. Contact the manufacturer for details and questions about using it for your application.)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMounting:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhen mounted properly, the gasket seal will withstand an internal tank pressure of over 6psi conforming to SAE J1810.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dimensions.png?ts=025749\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dimensions.png?ts=025749\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncludes:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e-Level Sensing Probe\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-SAE 5-Bolt Gasket\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Stainless Bolts 10-32 (x5)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Nylon Sealing Washers (x5)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Deutsch DT 2P Connector\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Deutsch DT Sockets (x2)\u003c\/span\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0439 12AN ORB to 5-Bolt SAE Adapter\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eThis adapter is commonly used with old FCST units (20-014X-XX) which had a small vent. It converts the fuel level flange to a large 12AN ORB vent.\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0439.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0439.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eNOTE: a fuel level sender cannot be used with this adapter in place.\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0439-INST2.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0439-INST2.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0146 Fuel Level Sender Block-Off\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eThis block-off plate kit is used when the 5-bolt SAE flanged fuel level sensor is not used. This is extensively used for customers with the \u003ca href=\"http:\/\/www.radiumauto.com\/FCST-Fuel-Cell-Surge-Tank-P1497.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/FCST-Fuel-Cell-Surge-Tank-P1497.aspx\"\u003eRadium Fuel Cell Surge Tank\u003c\/a\u003e but could be adapted to the following fuel cells: ATL, Fuel Safe, Pyrotect, Harmon, Jaz, Radium Engineering, etc. NOTE: Radium 20-049X-XX FCST does not require the sealing washers.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncludes:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e-Anodized 1\/8\" Aluminum Blank Plate\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-5 Bolt Sending Unit Viton Gasket\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Stainless Steel 10-32 Threaded Bolts\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Nylon Sealing Washers\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0146.jpg\" alt=\"\" width=\"600\" height=\"397\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0146.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e18-0020 Gasket, 5-Bolt Fuel Level Sender\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis 5-bolt SAE pattern gasket is used for many fuel cell level senders. The 1\/16\" thick material is a premium quality variation of FKM Viton.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/18-0020.jpg\" alt=\"\" width=\"600\" height=\"397\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/18-0020.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39501477576771,"sku":"TBS-d44f432bf5","price":189.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0247_1_1.jpg?v=1703122269"},{"product_id":"fuel-cells-ra-series","title":"Fuel Cells, RA-Series","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOrdering a fuel cell system can be complex.\u003cbr data-mce-fragment=\"1\"\u003eUse the online tool below to configure a complete fuel cell.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Configurator.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Configurator.aspx\" target=\"_blank\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/Fuel_Cell_config_banner.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/Fuel_Cell_config_banner.jpg\"\u003e\u003c\/a\u003e\u003cimg src=\"file:\/\/asssets\/ProductDESC\/Fuel_Cell_config_banner.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"file:\/\/asssets\/ProductDESC\/Fuel_Cell_config_banner.jpg\"\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOVERVIEW\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eA competition grade fuel cell provides maximum performance and safety for high performance vehicles. RA-series fuel cells are designed and manufactured by Radium Engineering to meet top safety requirements set forth by the worldwide safety organizations FiA and SFI. To learn why a certified fuel cell is superior to a fabricated tank,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Blog\/Post\/An-Introduction-to-Fuel-Cells-and-FIA-Homologation-110\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Blog\/Post\/An-Introduction-to-Fuel-Cells-and-FIA-Homologation-110\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003eThese fuel cells are excellent for all types of motorsports disciplines including road racing, time attack, drifting, rally, off-road racing and many more.\u003cbr data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/youtu.be\/BgDJHIFnPec\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/youtu.be\/BgDJHIFnPec\" target=\"_blank\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCLICK HERE to watch a fuel cell installation video\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCONSTRUCTION\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe heart of the fuel cell is the bladder (shown below in green). This component undergoes thorough testing and carries the critical certifications. Radium RA-series bladders are made from a special polymer that is resistant to ALL fuel types (gasoline, diesel, AV gas, E15, E85, ethanol, methanol, etc).\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/fuelcell75.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/fuelcell75.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe bladder is housed in a lightweight powder coated aluminum enclosure that protects from damage and debris. Pre-cut explosion suppressing anti-slosh foam is included as well as an innovative threaded aluminum nut ring which makes fuel pump installation fast and easy.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCERTIFICATIONS\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eThe RA-series fuel cells have been tested and approved by FIA and SFI. All RA-series fuel cells are serialized and come with both certifications and associated paperwork.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductDESC\/certs152.jpg\" alt=\"\" width=\"500\" height=\"100\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductDESC\/certs152.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eCertifications are valid for 5 years from the date of manufacture. Radium does NOT offer fuel cells without certifications.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/fuelcellcert2.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/fuelcellcert2.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eDuring tech inspections, certification decals on the bladder can be easily viewed by removing the inspection plate (shown above).\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSIZES\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eRadium Engineering produces RA-Series fuel cells in the following external sizes. \u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNOTE: The stated fluid capacity will vary due to the manufacturing processes and are only approximations.\u003c\/span\u003e Contact\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"mailto:sales@radiumauto.com\" data-mce-fragment=\"1\" data-mce-href=\"mailto:sales@radiumauto.com\" target=\"_blank\"\u003esales@radiumauto.com\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003efor more information. \u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dimension_Pic.PNG?ts=043617\" alt=\"\" width=\"500\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dimension_Pic.PNG?ts=043617\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dimensions_Picture.png\" alt=\"\" width=\"500\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dimensions_Picture.png\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eINTERNAL DEPTH (TOP OF CAN TO BLADDER FLOOR)\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e20-0606, 6 Gallon: 7.7 in (195mm) \u003cbr data-mce-fragment=\"1\"\u003e20-0610, 10 Gallon: 7.7 in (195mm)\u003cbr data-mce-fragment=\"1\"\u003e20-0614, 14 Gallon: 11.4 in (289mm)\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMETRIC VOLUME CONVERSION\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e6 Gallon = 23 Liters\u003cbr data-mce-fragment=\"1\"\u003e10 Gallon = 37 Liters\u003cbr data-mce-fragment=\"1\"\u003e14 Gallon = 53 Liters\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Fuel_Cell_Comparison.jpg?ts=044717\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Fuel_Cell_Comparison.jpg?ts=044717\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAll fuel cell sales are FINAL and cannot be returned or exchanged. \u003cspan data-mce-fragment=\"1\"\u003eMeasure carefully prior to ordering.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eINCLUDED\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Seamless Polymer Bladder\u003cbr data-mce-fragment=\"1\"\u003e-Explosion Suppressing Anti-Slosh Foam\u003cbr data-mce-fragment=\"1\"\u003e-Powder Coated Aluminum Enclosure\u003cbr data-mce-fragment=\"1\"\u003e-Anodized Aluminum Nut Ring\u003cbr data-mce-fragment=\"1\"\u003e-Removable Inspection Plate\u003cbr data-mce-fragment=\"1\"\u003e-Viton 6x10 24-bolt Gaskets, x2\u003cbr data-mce-fragment=\"1\"\u003e-Stainless Steel Hardware \u003cbr data-mce-fragment=\"1\"\u003e-Certification of Conformance\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIMPORTANT-Read Before Purchasing-\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e1.\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eAll fuel cell sales are final and cannot be returned or exchanged.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e2. If ordering a fuel cell with an\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/FCST-Fuel-Cell-Surge-Tank-P1497.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/FCST-Fuel-Cell-Surge-Tank-P1497.aspx\"\u003eFCST\u003c\/a\u003e, the products will be shipped assembled.\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e3. International Customers: Please contact sales@radiumauto.com for a shipping quote on fuel cells.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOPTIONAL ACCESSORIES\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eAn anti-starvation fuel pump system (FCST) can be found\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/FCST-Fuel-Cell-Surge-Tank-P1497.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/FCST-Fuel-Cell-Surge-Tank-P1497.aspx\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003eA weld-in mounting cage can be found\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Weld-In-Cages-P1824.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Weld-In-Cages-P1824.aspx\"\u003eHERE\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003eA complete fuel cell package can be orderded using Radium's Fuel Cell Configurator below:\u003cbr data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Configurator.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Configurator.aspx\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/Fuel_Cell_config_banner.jpg\" alt=\"\" width=\"600\" height=\"80\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/Fuel_Cell_config_banner.jpg\"\u003e\u003c\/a\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Configurator.aspx\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Configurator.aspx\"\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39501642301507,"sku":"TBS-47db57fc7c","price":683.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0606.jpg?v=1703122274"},{"product_id":"quick-fill-dump-cans","title":"Quick Fill Dump Cans","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eDump cans are used in motorsports when quick refueling pit stops are essential. The main difference between a \"dump can\" and a common \"fuel jug\" is the vent architecture. For quick filling, air entering the can must replace the exiting fuel at the same rate. If not, a vacuum will create a flow restriction and produce a \"gurgle\" or \"chug\" effect. These Radium Engineering 6 gallon dump cans are designed with a large 1.675\" OD vent tube that comes from the bottom minimizing refueling leaks and maximizing air flow for quick-filling. The vent tube can also be used for re-filling the dump can.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe dump cans are molded from a durable polymer safe for all fuel types (leaded gas, unleaded gas, diesel, AV gas, methanol, ethanol, E15, E85, etc.). The external rectangular shape was designed to match the fuel jug industry standard (9.5\" x 9.5\"). This allows for easy securing and storing with other fuel jugs. The integrated vent handle has finger grips for comfort. Other ergonomic features are molded into the dump can to make handling easier. The accurate graduation marks are molded in \"US GALLONS\" (shown below) on one side, and \"LITERS\" on the opposite side.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-11.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-11.jpg\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eVolume: 6 Gallons (22 Liters)\u003cbr data-mce-fragment=\"1\"\u003eHeight: 25.25\" (641mm)\u003cbr data-mce-fragment=\"1\"\u003eWidth: 9.5\" (241mm)\u003cbr data-mce-fragment=\"1\"\u003eDepth: 9.5\" (241mm) \u003cbr data-mce-fragment=\"1\"\u003eVent OD: 1.675\" (43mm)\u003cbr data-mce-fragment=\"1\"\u003eVent ID: 1.375\" (35mm) \u003cbr data-mce-fragment=\"1\"\u003ePour Spout OD (if cut): 2.5\" or 3\"\u003cbr data-mce-fragment=\"1\"\u003eColor: Semitransparent White\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0697-00 QUICK FILL DUMP CAN, 6 GALLON, STANDARD FILLER\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis dump can assembly has all the features mentioned above and is configured for \"standard filling\" (non-dry break). This is ideal for all types of motorsports.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0697-00.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0697-00.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis dump can features knurled aluminum pour and vent caps. The inner flow diameter of the stainless steel spout is maximized yet still compatible with all OEM fuel fillers. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-3.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-3.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFor ergonomics, the anodized aluminum plug also features knurled machining.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-9.jpg?ts=075412\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-9.jpg?ts=075412\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe vent cap features 6 different fuel type indicators: (UNLEADED, LEADED, METHANOL, ETHANOL, PRE-MIXED, DIESEL). The small knob can be screwed into the appropriate threaded hole to mark the fuel type inside.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-2.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-2.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFor slow controlled filling, the \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Plastic-Vent-Flip-Cap-P1917.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Plastic-Vent-Flip-Cap-P1917.aspx\"\u003eplastic flip cap\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e (shown) can be simply unlatched. For quick filling, the entire vent cap can be unscrewed.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0697-00_A.jpg\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0697-00_A.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0697-01 QUICK FILL DUMP CAN, 6 GALLON, 1.5IN DRY BREAK\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis dump can assembly includes a Radium Engineering dry break probe compatible with 1.5\" dry break receptacles. As shown below, the short tube is clear for fuel fill monitoring.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-7.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-7.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUnlike the 20-0697-EDC (economy dump can) described below, this dump can features knurled aluminum pour and vent caps. And because these unscrew, filling the dump can is a quick efficient process.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-2.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-2.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAs shown above, the vent cap features 6 different fuel type indicators: (UNLEADED, LEADED, METHANOL, ETHANOL, PRE-MIXED, DIESEL). The small knob can be screwed into the appropriate threaded hole to mark the fuel type inside. For quick filling with the dry break, the vent cap is removed for maximum air flow into the dump can. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0697-01.jpg\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0697-01.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNOTES: \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1. The plastic pour spout can be cut to suit 2.5\" and 3\" dry breaks.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2. For maximum flow efficiency, the fuel tank (or fuel cell) should have a large vent (see Radium P\/N: \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\"\u003e20-0535\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0697-EDC QUICK FILL DUMP CAN, 6 GALLON, 1.5IN DRY BREAK\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe \"economy dump can\" is a cost efficient option for pit crews that require numerous fuel cans for multiple vehicles. This dump can includes a Radium Engineering 1.5\" dry break probe compatible with both direct and remote mount dry break receptacles. It features a silicone coupler with stainless steel clamps for securing the dry break. The rubber vent plug is simply removed using the stainless steel wing nut. \u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0697-EDC.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0697-EDC.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNOTES: \u003cbr data-mce-fragment=\"1\"\u003e1. The plastic pour spout can be cut to suit 2.5\" and 3\" dry breaks.\u003cbr data-mce-fragment=\"1\"\u003e2. For maximum flow efficiency, the fuel tank (or fuel cell) should have a large vent (see Radium P\/N: \u003ca href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\"\u003e20-0535\u003c\/a\u003e).\u003cbr data-mce-fragment=\"1\"\u003e3. The EDC is not compatible with the screw-on caps mentioned above as there are no external threads.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39501690273859,"sku":"TBS-0c4f9215c9","price":142.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0697-00_A.jpg?v=1703122274"},{"product_id":"fuel-cell-refueling-kits","title":"Fuel Cell Refueling Kits","description":"\u003cp data-mce-fragment=\"1\"\u003eThese refueling kits are designed specifically for the Radium Engineering FCST. The FCST does not come standard with any of the parts in these kits. As described below, the Radium Engineering refueling kits come in a few different varieties. \u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0815-20 REFUELING KIT, DIRECT MOUNT, STANDARD FILL\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis option works for vehicles that require a standard filler mounted directly on the fuel cell. The included fill neck and cap mounts directly to the Radium FCST.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0815-20.jpg?ts=053128\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0815-20.jpg?ts=053128\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eA proper vent kit secures directly to the 8AN DSV that comes standard with the Radium FCST. \u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0815-EDC1 COMPLETE REFUELING KIT, DIRECT MOUNT, 1.5IN DRY BREAK\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis option works for vehicles that require a quick-fill dry break mounted directly on the fuel cell. The provided 6 gallon dump can features a leak-free dry break probe for quick fuel filling. The included vented dry break receiver mounts directly to the Radium FCST. Unlike pressurized systems, this unique dry break configuration is permitted for most sanctioning bodies. A proper vent kit secures directly to the provided quick-fill 12AN DSV. \u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0815-EDC1.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0815-EDC1.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eNOTE: This refueling kit is not an option if using an older Radium 20-014X-XX FCST in conjunction with a fuel level sender. However, if a fuel level sender is not used with 20-014X-XX FCST, \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Level-Sender-Options-P922.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Level-Sender-Options-P922.aspx\"\u003eRadium 20-0439\u003c\/a\u003e can be installed in the fuel level sender port to permit the required 12AN ORB vent port. The standard 8AN ORB female vent port on the 20-014X-XX FCST can be plugged with \u003ca href=\"http:\/\/www.radiumauto.com\/8AN-ORB-Fittings-P479.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/8AN-ORB-Fittings-P479.aspx\"\u003eRadium 14-0150\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0815-22 REFUELING KIT, REMOTE MOUNT, STANDARD FILL\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis option works for vehicles that require a standard filler mounted remotely from the fuel cell. The included flanged filler typically mounts to a body panel.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0815-22.jpg?ts=053459\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0815-22.jpg?ts=053459\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eA 36\" long (1.5\" ID) fuel filler hose attaches to the provided Radium FCST mounted fill neck elbow. A proper vent kit secures directly to the 8AN DSV that comes standard with the Radium FCST.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0815-EDC3 COMPLETE REFUELING KIT, REMOTE MOUNT, 1.5IN DRY BREAK\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis option works for vehicles that require a quick-fill dry break mounted remotely from the fuel cell. The provided 6 gallon dump can features a leak-free dry break probe for quick fuel filling. The included flanged vented dry break receiver typically mounts to a body panel. A 36\" long (1.5\" ID) fuel filler hose attaches to the provided Radium FCST mounted fill neck elbow. Unlike pressurized systems, this unique dry break configuration is permitted for most sanctioning bodies. A proper vent kit secures directly to the provided quick-fill 12AN DSV. \u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0815-EDC3.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0815-EDC3.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eNOTE: This refueling kit is not an option if using an older Radium 20-014X-XX FCST in conjunction with a fuel level sender. However, if a fuel level sender is not used with 20-014X-XX FCST, \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Level-Sender-Options-P922.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Level-Sender-Options-P922.aspx\"\u003eRadium 20-0439\u003c\/a\u003e can be installed in the fuel level sender port to permit the required 12AN ORB vent port. The standard 8AN ORB female vent port on the 20-014X-XX FCST can be plugged with \u003ca href=\"http:\/\/www.radiumauto.com\/8AN-ORB-Fittings-P479.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/8AN-ORB-Fittings-P479.aspx\"\u003eRadium 14-0150\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNOT CURRENTLY AVAILABLE\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e20-0815-00 COMPLETE REFUELING KIT, DIRECT MOUNT, STANDARD FILL\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis option works for vehicles that require a standard filler mounted directly on the fuel cell. The included fill neck and cap mounts directly to the Radium FCST. A proper vent kit secures directly to the 8AN DSV that comes standard with the Radium FCST. The provided 6 gallon dump can features a large vent for faster filling than typical fuel jugs.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOT CURRENTLY AVAILABLE\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e20-0815-01 COMPLETE REFUELING KIT, DIRECT MOUNT, 1.5IN DRY BREAK\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis option works for vehicles that require a quick-fill dry break mounted directly on the fuel cell. The provided 6 gallon dump can features a leak-free dry break probe for quick fuel filling. The included vented dry break receiver mounts directly to the Radium FCST. Unlike pressurized systems, this unique dry break configuration is permitted for most sanctioning bodies. A proper vent kit secures directly to the provided quick-fill 12AN DSV.\u003cbr data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eNOTE: This refueling kit is not an option if using an older Radium 20-014X-XX FCST in conjunction with a fuel level sender. However, if a fuel level sender is not used with 20-014X-XX FCST,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Level-Sender-Options-P922.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Level-Sender-Options-P922.aspx\"\u003eRadium 20-0439\u003c\/a\u003e can be installed in the fuel level sender port to permit the required 12AN ORB vent port. The standard 8AN ORB female vent port on the 20-014X-XX FCST can be plugged with\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/8AN-ORB-Fittings-P479.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/8AN-ORB-Fittings-P479.aspx\"\u003eRadium 14-0150\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOT CURRENTLY AVAILABLE\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e20-0815-02 COMPLETE REFUELING KIT, REMOTE MOUNT, STANDARD FILL\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis option works for vehicles that require a standard filler mounted remotely from the fuel cell. The included flanged filler typically mounts to a body panel. A 1.5\" fuel filler hose attaches to the provided Radium FCST mounted fill neck elbow. A proper vent kit secures directly to the 8AN DSV that comes standard with the Radium FCST. The provided 6 gallon dump can features a large vent for faster filling than typical fuel jugs. \u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOT CURRENTLY AVAILABLE\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e20-0815-03 COMPLETE REFUELING KIT, REMOTE MOUNT, 1.5IN DRY BREAK\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis option works for vehicles that require a quick-fill dry break mounted remotely from the fuel cell. The provided 6 gallon dump can features a leak-free dry break probe for quick fuel filling. The included flanged vented dry break receiver typically mounts to a body panel. A 1.5\" fuel filler hose attaches to the provided Radium FCST mounted fill neck elbow. Unlike pressurized systems, this unique dry break configuration is permitted for most sanctioning bodies. A proper vent kit secures directly to the provided quick-fill 12AN DSV. \u003cbr data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eNOTE: This refueling kit is not an option if using an older Radium 20-014X-XX FCST in conjunction with a fuel level sender. However, if a fuel level sender is not used with 20-014X-XX FCST,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Level-Sender-Options-P922.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Level-Sender-Options-P922.aspx\"\u003eRadium 20-0439\u003c\/a\u003e can be installed in the fuel level sender port to permit the required 12AN ORB vent port. The standard 8AN ORB female vent port on the 20-014X-XX FCST can be plugged with \u003ca href=\"http:\/\/www.radiumauto.com\/8AN-ORB-Fittings-P479.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/8AN-ORB-Fittings-P479.aspx\"\u003eRadium 14-0150\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eClick below for more information on the refueling kit components mentioned\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Quick-Fill-Dump-Cans-P1603.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Quick-Fill-Dump-Cans-P1603.aspx\"\u003eQuick Fill Dump Cans\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Filler-Options-P573.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Filler-Options-P573.aspx\"\u003eDirect Mount Fillers\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Remote-Mount-Filler-Options-P1666.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Remote-Mount-Filler-Options-P1666.aspx\"\u003eRemote Mount Fillers\u003c\/a\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Fill-Neck-Hoses-P1100.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Fill-Neck-Hoses-P1100.aspx\"\u003eFuel Fill Neck Hoses\u003c\/a\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eDSV (Dynamic Safety Valves)\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Vent-Kits-P1518.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Vent-Kits-P1518.aspx\"\u003eFuel Cell Vent Kits\u003c\/a\u003e\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39501735297091,"sku":"TBS-1e544a0620","price":142.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0815-EDC3.jpg?v=1703122274"},{"product_id":"fuel-cell-weld-in-cages","title":"Fuel Cell Weld-In Cages","description":"\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFUEL CELL CONFIGURATOR\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eFor a complete fuel cell package, run the fuel cell configurator \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Configurator.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Configurator.aspx\"\u003eHERE\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eA weld-in cage will ease fuel cell installation by offering a pre-made, safe and secure, robust cradle. The cage is made with 1\" x 1\" x 1\/16\" STAINLESS STEEL tube. They are TIG welded by hand and are polished. And because they are not mild carbon steel, they are rust resistant!\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/BlogImages\/josh_robinson_6x4.jpg?ts=121238\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/BlogImages\/josh_robinson_6x4.jpg?ts=121238\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIf preferred and with proper preparations, the cage can be painted as shown below.  \u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/PR-3-6.jpg\" alt=\"\" width=\"533\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/PR-3-6.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWelding is required and should be performed by a professional.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0710.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0710.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe fuel cell fits snug in the cage and is held in place with the included anodized aluminum straps. All parts are corrosion resistant.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/PR-64125436.jpg\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/PR-64125436.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTES:\u003cbr data-mce-fragment=\"1\"\u003e1. The weld-in cages are ONLY compatible with the\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cells-RA-Series-P1822.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cells-RA-Series-P1822.aspx\"\u003eRadium RA-series fuel cells\u003c\/a\u003e. \u003cbr data-mce-fragment=\"1\"\u003e2. The 14 gallon and 15 gallon weld-in cages are interchangeable.\u003cbr data-mce-fragment=\"1\"\u003e3. Made in Portland Oregon, USA.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eInternational Customers: Please contact \u003c\/span\u003e\u003ca href=\"emailto:%20sales@radiumauto.com\" data-mce-fragment=\"1\" data-mce-href=\"emailto:%20sales@radiumauto.com\"\u003esales@radiumauto.com\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e for a shipping quote.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39501761675331,"sku":"TBS-499452b8d0","price":484.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0706.jpg?v=1703122274"},{"product_id":"submersible-fuel-tubing","title":"Submersible Fuel Tubing","description":"\u003cp data-mce-fragment=\"1\"\u003eThese fuel tubing kits are commonly used for plumbing in-tank submerged fuel pumps. The flexible convoluted tubing is manufactured from polyamide nylon and is therefore resistant to all fuel types including alcohol blends such as E85 and suitable for EFI fuel pressure.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/PTFE_Hose_1.jpg\" alt=\"\" width=\"599\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/PTFE_Hose_1.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThere are 2 inner diameter sizes available including 5\/16\" (8mm) and 3\/8\" (10mm). When installing, run hot water over the ends first to loosen the material. This allows the tubing to fit snugly over the barb. Next, torque the reuseable stainless steel SAE J1508 clamps to 13.3 in-lbs. These clamps provide a 360 degree seal with rolled edges to protect the tubing.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0875.jpg?ts=032126\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0875.jpg?ts=032126\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNOTE: All tubes are translucent white excluding 20-0875 (above) and 20-0895 which are opaque black. \u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRADIUM P\/N: 20-0175, 20-0375, 20-0775, and 20-0875 compatible the following.\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Walbro GSS341 255LPH Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-Walbro GSS342 255LPH Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-AEM 50-1000 Gas Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-AEM 50-1200 E85 Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-AEM 50-1220 E85 Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-Aeromotive 340R 11141 Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-Aeromotive 340R 11142 Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-Deatschwerks 9-301-1000 Fuel Pump\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRADIUM P\/N: 20-0195, 20-0395, 20-0795, and 20-0895 compatible the following.\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Walbro F9000262 Gas Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-Walbro F9000267 E85 Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-Walbro F9000273 Gas Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-Walbro F9000274 E85 Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-Walbro F9000285 E85 Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-Walbro F9000295 E85 Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-Bosch Motorsports BR540 Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-Deatschwerks DW400 Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-Deatschwerks DW440 Brushless Fuel Pump\u003cbr data-mce-fragment=\"1\"\u003e-Ti Automotive E5LM Brushless Fuel Pump\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eINCLUDES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e-PA Nylon Convoluted Tubing\u003cbr data-mce-fragment=\"1\"\u003e-Stainless Steel EFI Tube Clamps (x2)\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTESTING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese tubes have been tested at Radium Engineering.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWorking Pressure:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e300psi\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBurst Pressure:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e450psi\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39501792804931,"sku":"TBS-e4d0d890f3","price":18.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0895.jpg?v=1703122274"},{"product_id":"fcst-fuel-cell-surge-tank","title":"FCST, Fuel Cell Surge Tank","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eFor installation on older 20-049X-XX FCST versions, click \u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0200.PDF\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0200.PDF\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eFor installation on older 20-014X-XX FCST versions, click \u003ca href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0079G.PDF\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/data.radiumauto.com\/PublicDocs\/19-0079G.PDF\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTo configure a complete fuel cell with FCST and other accessories, click below:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Configurator.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Configurator.aspx\" target=\"_blank\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/Fuel_Cell_config_banner.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/Fuel_Cell_config_banner.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBACKGROUND\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eSince 2010, external Radium Engineering fuel surge tanks have been an excellent way to eliminate fuel starvation that occurs in racing. To simplify plumbing and packaging, in 2013 Radium Engineering introduced the first generation Fuel Cell Surge Tank (FCST) to the competition vehicle market. It quickly became the preferred fuel system for professional racing.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWHAT IS A FCST?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Fuel Cell Surge Tank is a drop-in fuel pump system for Radium Engineering's popular fuel cells or any cell that uses the industry standard 6x10 24-bolt fill plate bolt pattern. The FCST is designed to protect EFI vehicles that experience fuel starvation. It is NOT a glorified trap door box with baffles. It features a true dual-chamber fuel tank utilizing a single lift pump and up to 3 surge tank pumps all packaged inside the fuel cell. It provides all the benefits of a traditional external fuel surge tank without safety concerns and plumbing complexity. \u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIS THIS COMPATIBLE WITH MY FUEL CELL?\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eTo install a Radium Engineering FCST into a fuel cell, the following criteria must be met:\u003cbr data-mce-fragment=\"1\"\u003e1. The cell must have the industry standard 6\"x10\" 24-bolt flange opening.\u003cbr data-mce-fragment=\"1\"\u003e2. The opening must be on the top face of the fuel cell (i.e. not a side face).\u003cbr data-mce-fragment=\"1\"\u003e3. The cell depth must be at least 7.7\" (196mm) measured from the outer top face to the internal bottom face.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHOW IT WORKS\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/strong\u003eA lift pump scavenges fuel from the bottom of the fuel cell and pumps it into the 2 liter surge tank. Inside the surge tank canister, up to 3 EFI fuel pumps can be used to feed high pressure fuel to the engine. If the lift pump starves, the volume inside the surge tank canister will keep the surge tank pumps fed and the engine supplied with fuel. The return from the pressure regulator is also routed to the surge tank canister to help keep it full.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/FCST_Fill_Valves.png\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/FCST_Fill_Valves.png\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAs shown above, there are three fill valves integrated to the bottom of the surge tank. These 1-way FKM Viton fill valves are sealed shut unless the fuel level in the cell rises above the fuel level in the surge tank. If this happens, each fill valve opens and sends 355LPH of fuel (1065LPH total) into the surge tank until fuel level reaches an equilibrium. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eExcess fuel in the surge tank simply overflows back into the fuel cell. This dynamic sequence is all done inside the safety of a fuel cell.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFEATURES FOR 20-069X-XX FCST\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOver the years, Radium Engineering has continued to refine the FCST into a robust and highly functional piece of hardware.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Merged single 10AN ORB female threaded outlet. All pumps use check valves that prevent back-flow for multi-pump applications.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-One-way fill valve located on the bottom of the canister that allows fuel in, but not out, keeping the surge tank full.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Multiple fuel pump options including gerotor, turbine, and brushless DC motor pumps.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Hermetically sealed high-current stainless steel electrical studs capable of handling all pumps.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Simplified servicing features eliminating nylon sealing washers and fuel cell retaining brackets.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Full CNC aluminum construction with anodized surfacing for superior corrosion resistance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Fuel compatibility: leaded and unleaded gasoline, methanol, ethanol, E85, etc.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Dynamic safety vent valve with rollover protection and fuel fill shut-off.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Optional fuel surge tank level switch and diagnostic LED failsafe port (shown below).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-069X-XX_Closeup-1.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-069X-XX_Closeup-1.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWHATS IN THE BOX?\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eThe following comes standard with every FCST variation configured per part number\u003cbr data-mce-fragment=\"1\"\u003e-8AN DSV (dynamic safety vent) valve\u003cbr data-mce-fragment=\"1\"\u003e-6x10 24-hole FKM Viton gasket\u003cbr data-mce-fragment=\"1\"\u003e-6AN male return fitting (other sizes can be utilized)\u003cbr data-mce-fragment=\"1\"\u003e-8AN male pump out fitting (other sizes can be utilized)\u003cbr data-mce-fragment=\"1\"\u003e-Fuel level sensor block-off plate\u003cbr data-mce-fragment=\"1\"\u003e-Fuel level switch block-off plug\u003cbr data-mce-fragment=\"1\"\u003e-FKM Viton 1-way fill valves\u003cbr data-mce-fragment=\"1\"\u003e-Stainless steel mounting hardware\u003cbr data-mce-fragment=\"1\"\u003e-Insulated anodized aluminum acorn nuts\u003cbr data-mce-fragment=\"1\"\u003e-Electrical power wire ring terminals\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e-Links for compatible fillers (not included), \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Filler-Options-P573.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Filler-Options-P573.aspx\"\u003eDirect Mount\u003c\/a\u003e or \u003ca href=\"http:\/\/www.radiumauto.com\/Remote-Mount-Filler-Options-P1666.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Remote-Mount-Filler-Options-P1666.aspx\"\u003eRemote Mount\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSELECTING YOUR FCST\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/span\u003eThe different FCST part numbers are based on the brand and quantity of fuel pumps. When determining a fuel pump configuration, use the chart below to select a combination that can support the engine's output. More fuel pump information can be found \u003ca href=\"http:\/\/www.radiumauto.com\/Blog\/Post\/Fuel-Pumps-Used-by-Radium-Engineering-97\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Blog\/Post\/Fuel-Pumps-Used-by-Radium-Engineering-97\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003eIf you would like to use a different pump, please contact Radium technical support.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-069X-XX FCST\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 20-069X-XX Fuel Cell Surge Tanks (with exception to brushless E5LM) are available with and without pumps included. The lift pump is always matched to be the same style pump(s) found inside the fuel surge tank canister. Any option that lists \"Pump Included\" comes pre-assembled with new fuel pumps and filters installed.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-069X-XX.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-069X-XX.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIf \"pumps not included\" is ordered (shown above), fuel pumps must be sourced separately. A filter sock will only be required for the lift pump as inlet filters are already supplied for the surge tank pumps. Also, there will be enough components included with this option to use up to 3 pumps in the surge tank. Depending on the setup, some parts may not be used.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0693-00 FCST, PUMPS NOT INCLUDED, BRUSHLESS TI AUTOMOTIVE E5LM\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 20-0693-00 Fuel Cell Surge Tank is only available without pumps included. It is designed to use one or two Ti Automotive E5LM brushess fuel pumps inside the surge tank. A standard brushed pump is used as a lift pump.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0693-00.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0693-00.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eTi Automotive E5LM brushless fuel pumps can be purchased\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Ti-Automotive-BKS1000-Brushless-Pump-and-Controller-P1694.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Ti-Automotive-BKS1000-Brushless-Pump-and-Controller-P1694.aspx\"\u003eHERE\u003c\/a\u003e, but will not be installed by Radium Engineering. Assembly must be performed by the installer.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0693-00_Install.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0693-00_Install.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAs shown below, the lift pump electrical and plumbing is set to be compatible with Walbro F90000267\/274\/285\/295 fuel pumps. Radium Engineering recommends the\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Walbro-F90000295-E85-Fuel-Pump-P1714.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Walbro-F90000295-E85-Fuel-Pump-P1714.aspx\"\u003eWalbro F90000295\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eas a lift pump for maximum flow. Filter socks are required for all pumps. \u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0693-00_Assembly.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0693-00_Assembly.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNOTE: Ti Automotive brushless fuel pumps do not have integrated check valves like many other pumps.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0598_install2.jpg\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0598_install2.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSo this FCST includes two \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Pump-Outlet-Adapter-Check-Valve-P1709.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Pump-Outlet-Adapter-Check-Valve-P1709.aspx\"\u003e20-0598\u003c\/a\u003e fuel pump outlet adapter check valves (shown above). Because the 2 surge tank pumps merge into a single outlet collector, these high flow 1-way valves permit multiple pumps to be staged without backflow.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0695-00 FCST, PUMPS NOT INCLUDED, EXTERNAL PUMPS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe 20-0695-00 Fuel Cell Surge Tank is only available without pumps not included. It is designed to be used with a mechanical fuel pump or inline electric pump(s). One or two -10AN (5\/8\") fuel pickups are used inside the surge tank. Each pickup uses a 80u (micron) filter. If two pickups are used, \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Distribution-Blocks-P918.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Distribution-Blocks-P918.aspx\"\u003e20-0737 Distribution Block\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e is recommended for pumps that use a 12AN inlet.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0695-00_New.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0695-00_New.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe lift pump electrical and plumbing for this kit is set to be compatible with Walbro F90000267\/274\/285\/295 fuel pumps. Radium Engineering recommends the \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Walbro-F90000295-E85-Fuel-Pump-P1714.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Walbro-F90000295-E85-Fuel-Pump-P1714.aspx\"\u003eWalbro F90000295\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e as a lift pump for maximum flow with a \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Pump-Inlet-Filter-Socks-P448.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Pump-Inlet-Filter-Socks-P448.aspx\"\u003e14-0143 Filter Sock\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSTANDARD FITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePUMP OUT -8AN MALE\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe external fuel pump outlet port is signified by the \"PUMP OUT\" engraving. It uses 7\/8\"-14 threads making it compatible with all 10AN ORB fittings. The FCST comes standard with a common 10AN ORB to 8AN male adapter fitting. However, various 10AN ORB adapter fittings can be purchased separately\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/10AN-ORB-Fittings-P297.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/10AN-ORB-Fittings-P297.aspx\"\u003eHERE\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRETURN -6AN MALE\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe external \"RETURN\" port is used for low pressure fuel returning from the FPR. This port uses 3\/4\"-16 threads making it compatible with all 8AN ORB fittings. The FCST comes standard with a common 8AN ORB to 6AN male adapter fitting. However, various 8AN ORB adapter fittings can be purchased separately \u003ca href=\"http:\/\/www.radiumauto.com\/8AN-ORB-Fittings-P479.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/8AN-ORB-Fittings-P479.aspx\"\u003eHERE\u003c\/a\u003e. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eVENT -8AN MALE\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe external \"VENT\" port is tapped with 1-1\/16\"-12 threads making it compatible with all 12AN ORB fittings. The FCST comes standard with\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\"\u003e20-0435\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ewhich uses a common 8AN male outlet fitting for standard fuel filling. However,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\"\u003e20-0535\u003c\/a\u003e can be purchased separately with a 12AN male fitting for quick fill dry break systems that require a high-flow vent.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWHAT ELSE IS NEEDED?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFUEL CELL\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eA fuel cell is not included with the FCST. The fuel cell MUST use a 6x10, 24-bolt fill plate flange. The distance from the outer top face to the internal botton face must be at least 7.7\" (196mm). The distance from the top of the fuel cell to the bottom of the lift pump filter (lowest point of the kit) is adjustable. However, if the fuel cell is deeper than 10 inches, purchase this\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.radiumauto.com\/FCST-Lift-Pump-Extension-for-Deep-Cells-P833.aspx\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.radiumauto.com\/FCST-Lift-Pump-Extension-for-Deep-Cells-P833.aspx\"\u003eLift Pump Extension\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFUEL FILLER\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eIf you do not currently have a 6-bolt (2.18\" B.C.) filler, Radium Engineering has them for both \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Fill-Neck-P573.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Fill-Neck-P573.aspx\"\u003edirect\u003c\/a\u003e filling and \u003ca href=\"http:\/\/www.radiumauto.com\/Remote-Mount-Filler-Options-P1666.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Remote-Mount-Filler-Options-P1666.aspx\"\u003eremote\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003efilling.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eVENT HOSE\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eA hose and\/or filter must be connected to the \"VENT\" port fitting. For compatible vent kits and more information on how these are plumbed and routed, go \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Vent-Kits-P1518.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Vent-Kits-P1518.aspx\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOPTIONAL ACCESSORIES\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFUEL LEVEL SENDER\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe FCST comes standard with a fuel level sender block off plate. However, SAE fuel level senders of various lengths can be purchased separately \u003ca href=\"http:\/\/www.radiumauto.com\/Universal-Fuel-Cells-C105.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Universal-Fuel-Cells-C105.aspx\"\u003eHERE\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFUEL LEVEL SWITCH \/ DIAGNOSTIC INDICATOR\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 20-069X-XX FCST comes standard with a 2AN ORB plug in the \"level switch\" port. This little device provides a warning when the fuel level inside surge tank canister drops by 20% or more. For more information on adding a fuel level switch and diagnostic indicator, click \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Level-Switch-and-Diagnostic-Indicator-P1686.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Level-Switch-and-Diagnostic-Indicator-P1686.aspx\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNOTE: RADIUM DOES NOT OFFER A WARRANTY ON ANY FUEL PUMPS! FUEL PUMPS CAN BE RETURNED IN UNUSED CONDITION WITHIN 30 DAYS OF PURCHASE. SEE TERMS AND CONDITIONS FOR MORE INFORMATION.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39501857226819,"sku":"TBS-df30893b2f","price":664.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-069X-XX.jpg?v=1703122277"},{"product_id":"submersible-rubber-fuel-hose","title":"Submersible Rubber Fuel Hose","description":"\u003cp data-mce-fragment=\"1\"\u003ePRICED BY THE FOOT\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis fluoroelastomer (FKM) rubber hose is found in many Radium fuel system products. It is designed specifically to handle gasoline, alcohol fuels (including E85), and diesel fuel in fully immersed, mobile, stationary, and marine applications. Unlike typical EFI hose, this is engineered for constant contact with liquid petroleum distillates on the inside and outside of this hose. It is excellent for fuel pumps mounted in gas tanks and has great flexibility to work with barbs and hose clamps.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 7.5mm ID (inner diameter) hose is great for 5\/16\" barbs such as those found on Walbro 255 style fuel pumps. The outside diameter is 13.4 (+\/-0.2mm).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 8.5mm ID (inner diameter) hose is great for 3\/8\" barbs such as the Walbro F90000267 and F90000274 (E85) fuel pumps. The outside diameter is 13.8 (+\/-0.2mm).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eCompatible hose clamps can be found\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Hose-Clamps-P894.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Hose-Clamps-P894.aspx\"\u003eHERE.\u003c\/a\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/PCV_Hose.jpg\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/PCV_Hose.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMeets or exceeds SAE J30R10 specifications. The maximum temperature is 302F (150C), working pressure is 300psi max, and burst pressure is 500psi. \u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eHOW TO ORDER:\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEnter the amount of feet required in the Quantity box. Please round to the nearest foot (decimals not allowed).\u003cbr data-mce-fragment=\"1\"\u003eUnits Conversion: 1ft = 12in = 30.5cm = 305mm\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eExamples \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eQuantity: 1, Radium will provide 1 foot of fuel hose in the size you have selected.\u003cbr data-mce-fragment=\"1\"\u003eQuantity: 6, Radium will provide 6 feet of fuel hose in the size you have selected. \u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"7.5mm","offer_id":39501902905411,"sku":"TBS-a99c5ff5b3","price":18.95,"currency_code":"USD","in_stock":false},{"title":"8.5mm","offer_id":39501902938179,"sku":"TBS-a99c5ff5b4","price":18.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/submersible1.jpg?v=1703122278"},{"product_id":"fuel-fill-neck-hoses","title":"Fuel Fill Neck Hoses","description":"\u003cp data-mce-fragment=\"1\"\u003eThis wire reinforced hose is designed specifically for fuel filling. Internal hose diameters are available in 1.5\" and 2.25\" making it ideal for many applications including the options\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Fill-Kits-P573.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Cell-Fill-Kits-P573.aspx\"\u003ehere\u003c\/a\u003e. The hose is used to connect to a body-mounted filler.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/RadiumProd-1455.jpg?ts=041347\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/RadiumProd-1455.jpg?ts=041347\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eUnlike silicone fuel fill hose, this is convoluted permitting tight bends, as depicted below. \u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/RadiumProd-1435.jpg?ts=040647\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/RadiumProd-1435.jpg?ts=040647\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor universal applications, the filler hose is 36\" long that can be cut to length. 304 Stainless Steel T-Bolt clamps are included that features a protective smooth inside and permits a 360 degree seal.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0597 HOSE SPECIFICATIONS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eInside Diameter: 1.5\" (38mm) ID\u003cbr data-mce-fragment=\"1\"\u003eWall Thickness: 0.176\" (4.47mm)\u003cbr data-mce-fragment=\"1\"\u003eLength: 3 feet (914mm)\u003cbr data-mce-fragment=\"1\"\u003eWorking Pressure: 20-psi maximum\u003cbr data-mce-fragment=\"1\"\u003eBurst Pressure: 90-psi mimimum\u003cbr data-mce-fragment=\"1\"\u003eBend Radius: 5\" minimum\u003cbr data-mce-fragment=\"1\"\u003eTube Construction: Nitrile \u003cbr data-mce-fragment=\"1\"\u003eReinforcement: Synthetic Fabric\u003cbr data-mce-fragment=\"1\"\u003eFlex: Two Embedded Helical Wires\u003cbr data-mce-fragment=\"1\"\u003eCover: Neoprene Coated Fabric\u003cbr data-mce-fragment=\"1\"\u003eTemperature Range: -40F to 212F\u003cbr data-mce-fragment=\"1\"\u003eStandards: SAE 30R5\u003cbr data-mce-fragment=\"1\"\u003eMade in USA \u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0597.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0597.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0297 HOSE SPECIFICATIONS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eInside Diameter: 2.25\" (57mm) ID\u003cbr data-mce-fragment=\"1\"\u003eWall Thickness: 0.176\" (4.47mm)\u003cbr data-mce-fragment=\"1\"\u003eLength: 3 feet (914mm)\u003cbr data-mce-fragment=\"1\"\u003eWorking Pressure: 20-psi maximum\u003cbr data-mce-fragment=\"1\"\u003eBurst Pressure: 90-psi mimimum\u003cbr data-mce-fragment=\"1\"\u003eBend Radius: 8\" minimum\u003cbr data-mce-fragment=\"1\"\u003eTube Construction: Nitrile\u003cbr data-mce-fragment=\"1\"\u003eReinforcement: Synthetic Fabric\u003cbr data-mce-fragment=\"1\"\u003eFlex: Two Embedded Helical Wires\u003cbr data-mce-fragment=\"1\"\u003eCover: Neoprene Coated Fabric\u003cbr data-mce-fragment=\"1\"\u003eTemperature Range: -40F to 212F\u003cbr data-mce-fragment=\"1\"\u003eStandards: SAE 30R5\u003cbr data-mce-fragment=\"1\"\u003eMade in USA \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0297.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0297.jpg\"\u003e\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"1.5in","offer_id":39501934919747,"sku":"TBS-a501af64f6","price":85.45,"currency_code":"USD","in_stock":false},{"title":"2.25in","offer_id":39501934952515,"sku":"TBS-a501af64f7","price":85.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0297.jpg?v=1703122278"},{"product_id":"remote-mount-filler-options","title":"Remote Mount Filler Options","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWhat is a remote mounted fuel filler?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eA remote mounted fuel filler is NOT located directly on the fuel tank or fuel cell, but rather somewhere else on the vehicle, such as the fender. See this \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Blog\/Post\/Refueling-options-from-Radium-Engineering-112\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Blog\/Post\/Refueling-options-from-Radium-Engineering-112\" target=\"_blank\"\u003eblog article\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e for more information on fuel cell filling.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0505-V Remote Mount Fuel Filler, 1.5in, Vented\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 20-0505-V Remote Mount Filler, 1.5in, Vented typically secures to the vehicle body. The vented fuel cap has roll-over protection if the vehicle ever becomes inverted. The fill neck has a machined hose barb connection for 1.5\" filler hose (available \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Fill-Neck-Hose-2-14-ID-P1100.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Fill-Neck-Hose-2-14-ID-P1100.aspx\"\u003eHERE\u003c\/a\u003e). The outer diameter is 4.75\" and uses 4.25\" P.C.D for the five M5 bolts. Total height is 4.1\". Requires a 77mm (3.03\") hole to be fabricated.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIncluded:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Vented Cap with Roll-Over Protection\u003cbr data-mce-fragment=\"1\"\u003e-Flanged Fill Neck for 1.5\" ID Hose\u003cbr data-mce-fragment=\"1\"\u003e-Ozone\/Flame Resistant Gasket\u003cbr data-mce-fragment=\"1\"\u003e-Anodized Aluminum Nut Ring\u003cbr data-mce-fragment=\"1\"\u003e-Stainless Steel M5 Bolts\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNotes: \u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e1. Does not include accessories to connect to the fuel tank.\u003cbr data-mce-fragment=\"1\"\u003e2. Can be upgraded later to a dry break using Radium 20-0549-V.\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0505-V.jpg\" alt=\"\" width=\"599\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0505-V.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0504-V Dry Break, 1.5in, Female, Remote Mount, Vented\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 20-0504-V Dry Break, 1.5in, Female, Remote Mount, Vented typically secures to the vehicle body. The vented fuel cap has roll-over protection if the vehicle ever becomes inverted. The fill neck has a machined hose barb connection for 1.5\" filler hose (available \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Fill-Neck-Hose-2-14-ID-P1100.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Fill-Neck-Hose-2-14-ID-P1100.aspx\"\u003eHERE\u003c\/a\u003e). The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.). The outer diameter is 4.75\" and uses 4.25\" P.C.D for the five M5 bolts. Total height is 4.1\". Requires a 77mm (3.03\") hole to be fabricated.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIncluded:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e-20-0549-V Dry Break, 1.5in, Female, Vented\u003cbr data-mce-fragment=\"1\"\u003e-Flanged Fill Neck for 1.5\" ID Hose\u003cbr data-mce-fragment=\"1\"\u003e-Ozone\/Flame Resistant Gasket\u003cbr data-mce-fragment=\"1\"\u003e-Anodized Aluminum Nut Ring\u003cbr data-mce-fragment=\"1\"\u003e-Stainless Steel M5 Bolts\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNotes: \u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e1. Does not include accessories to connect to the fuel tank.\u003cbr data-mce-fragment=\"1\"\u003e2. Is compatible with the simple fuel cap (Radium 20-0548-V Fuel Cap, Remote Mount, Vented).\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0504-V.jpg\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0504-V.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eFiller Hose Requirement: 1.5\"\u003cbr data-mce-fragment=\"1\"\u003eFlange Outer Diameter: 4.75\"\u003cbr data-mce-fragment=\"1\"\u003eBolt Circle Diameter: 4.25\" PCD\u003cbr data-mce-fragment=\"1\"\u003eHeight: 4.08\" (Dry Break to Barb)\u003cbr data-mce-fragment=\"1\"\u003eMate: 20-0496 Dry Break, 1.5in, Male\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0547 Remote Mount Fill Neck, 24AN Elbow, 1.5in\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eB\u003c\/span\u003earb\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 20-0547 Remote Mount Fill Neck is primarily used with a body-mounted remote filler (see 20-0505-V). The -24AN fill neck mates to a 24AN hose end capable of 360 degree rotation. It features a 75 degee elbow and uses a 1.5\" barb (filler hose available \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Fill-Neck-Hose-2-14-ID-P1100.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Fill-Neck-Hose-2-14-ID-P1100.aspx\"\u003eHERE\u003c\/a\u003e). A bespoke 1-7\/8\" aluminum wrench is provided for tightening the B-nut and prevent marring. The fill neck features a flapper check valve for rollover protection.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0547Wrench.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0547Wrench.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIncluded:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e-24AN Flanged Fill Neck\u003cbr data-mce-fragment=\"1\"\u003e-24AN Hose End Elbow for 1.5\" ID Hose\u003cbr data-mce-fragment=\"1\"\u003e-Aluminum Wrench, 1-7\/8\"\u003cbr data-mce-fragment=\"1\"\u003e-Viton Gasket Flange Seal\u003cbr data-mce-fragment=\"1\"\u003e-Viton Flapper Valve\u003cbr data-mce-fragment=\"1\"\u003e-Nylon Sealing Washers\u003cbr data-mce-fragment=\"1\"\u003e-Stainless Steel Hardware\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0547n.jpg\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0547n.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote: \u003c\/strong\u003eDoes not include filler hose, fuel cap, etc.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0527 Remote Mount Fill Neck, Straight, 1.5in Barb\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 20-0527 Remote Mount Fill Neck, Straight, 1.5in Barb is multi-functional and is primarily used with a body-mounted remote filler (not included). The fill neck has a machined hose barb connection for 1.5\" filler hose (available \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Fill-Neck-Hose-2-14-ID-P1100.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Fuel-Fill-Neck-Hose-2-14-ID-P1100.aspx\"\u003eHERE\u003c\/a\u003e). The fill neck features a flapper check valve for rollover protection.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0527.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0527.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncluded:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Flanged Fill Neck for 1.5\" ID Hose\u003cbr data-mce-fragment=\"1\"\u003e-Viton Gasket Flange Seal\u003cbr data-mce-fragment=\"1\"\u003e-Viton Flapper Valve\u003cbr data-mce-fragment=\"1\"\u003e-Nylon Sealing Washers\u003cbr data-mce-fragment=\"1\"\u003e-Stainless Steel Hardware\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e20-0548-V Fuel Cap, Remote Mount, Vented\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/strong\u003eThis is replacement vented fill cap. This is included with 20-0505-V and is compatible with 20-0504-V.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0548-V.jpg\" alt=\"\" width=\"600\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0548-V.jpg\"\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0360 Filler Block-Off\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/span\u003eThis kit blocks off the filler hole on the Radium FCST units.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIncluded:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Machined and Anodized Aluminum Blank Plate\u003cbr data-mce-fragment=\"1\"\u003e-FKM Viton Gasket Flange Seal\u003cbr data-mce-fragment=\"1\"\u003e-Nylon Sealing Washers\u003cbr data-mce-fragment=\"1\"\u003e-Stainless Steel Hardware\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0360.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0360.jpg\"\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e18-0019 Gasket, 6-Bolt Fill Neck, 2.18\" BC\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/strong\u003eThis gasket is used for Radium fuel cell fill necks. The 1\/16\" thick material is a premium quality variation of FKM Viton. It uses 6 equally-spaced holes with a 2.18\" bolt center.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/18-0019.jpg\" alt=\"\" width=\"600\" height=\"397\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/18-0019.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39501955760195,"sku":"TBS-14afc90937","price":9.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0505-V_assem.jpg?v=1703122278"},{"product_id":"direct-mount-filler-options","title":"Direct Mount Filler Options","description":"\u003cp data-mce-fragment=\"1\"\u003eThe Radium Engineering fuel cell fill kits can be used on any cell that uses a 6-bolt 2.18\" (55mm) bolt circle mounting flange. This bolt pattern is used on all Radium Engineering Fuel Cell Surge Tanks. Screw threads are the industry standard 1\/4\"-28.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSee this\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Blog\/Post\/Refueling-options-from-Radium-Engineering-112\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Blog\/Post\/Refueling-options-from-Radium-Engineering-112\" target=\"_blank\"\u003eblog article\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003efor more information on fuel cell filling.\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0197-V Direct Mount Fill Neck and Cap\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 20-0197-V Direct Mount Fill Neck and Cap is perfect for filling directly into the fuel cell, as shown. This kit uses the 20-0148-V Fill Neck Cap (included) so filling is quick and simple.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/productDESC\/Direct_Fill.jpg\" alt=\"\" width=\"599\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.radiumauto.com\/Assets\/productDESC\/Direct_Fill.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIncluded:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/strong\u003e-Machined and Anodized Aluminum Fill Neck\u003cbr data-mce-fragment=\"1\"\u003e-Anodized and Laser Etched Aluminum Cap\u003cbr data-mce-fragment=\"1\"\u003e-Viton Gasket Flange Seal\u003cbr data-mce-fragment=\"1\"\u003e-Viton O-ring Cap Seal\u003cbr data-mce-fragment=\"1\"\u003e-Stainless Steel Hardware\u003cbr data-mce-fragment=\"1\"\u003e \u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Fill_Neck_Tether.jpg\" alt=\"\" width=\"599\" height=\"400\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Fill_Neck_Tether.jpg\"\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0495-V Dry Break, 1.5in, Female, Direct Mount, Vented\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eDesigned for direct mounting onto a fuel cell. For mating, a 6-bolt flange with a 2.18\" PCD bolt circle (as found on the \u003ca href=\"http:\/\/www.radiumauto.com\/FCST-Fuel-Cell-Surge-Tank-P1497.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/FCST-Fuel-Cell-Surge-Tank-P1497.aspx\"\u003eFCST\u003c\/a\u003e) is required. Includes 20-0549-V Dry Break, 1.5in, Female, Vented as well as an aluminum housing, stainless steel hardware, and a gasket. The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.).\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0495-V.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0495-V.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eHeight: 3.43\" (Dry Break to Gasket)\u003cbr data-mce-fragment=\"1\"\u003eMate: 20-0496 Dry Break, 1.5in, Male\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e20-0148-V Fill Neck Cap Only\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/strong\u003eThis is replacement fill neck cap. Compatible with Radium Engineering 20-0197-V.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIncluded:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Vented Fuel Fill Cap\u003cbr data-mce-fragment=\"1\"\u003e-Roll Over Protection\u003cbr data-mce-fragment=\"1\"\u003e-FKM Viton O-ring \u003cbr data-mce-fragment=\"1\"\u003e-Tether Hardware\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0148-V.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0148-V.jpg\"\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0360 Filler Block-Off\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/span\u003eThis kit blocks off the filler hole on the Radium FCST units.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIncluded:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Machined and Anodized Aluminum Blank Plate\u003cbr data-mce-fragment=\"1\"\u003e-FKM Viton Gasket Flange Seal\u003cbr data-mce-fragment=\"1\"\u003e-Stainless Steel Hardware\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0360.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0360.jpg\"\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e18-0019 Gasket, 6-Bolt Fill Neck, 2.18\" BC\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/strong\u003eThis gasket is used for Radium fuel cell fill necks. The 1\/16\" thick material is a premium quality variation of FKM Viton. It uses 6 equally-spaced holes with a 2.18\" bolt center.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/18-0019.jpg\" alt=\"\" width=\"600\" height=\"397\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/18-0019.jpg\"\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39501986168899,"sku":"TBS-c46c3cf1b7","price":9.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0197-V.jpg?v=1703122277"},{"product_id":"dynamic-safety-vent-dsv-valves","title":"Dynamic Safety Vent (DSV) Valves","description":"\u003cp data-mce-fragment=\"1\"\u003eRadium Engineering Dynamic Safety Vent (DSV) valves feature advanced tank venting and roll-over protection for fuel cells and gas tanks. The Radium Engineering DSV valves come in different varieties for all fill type applications; standard fill and quick-fill. Simply put, the larger the vent, the quicker the fuel cell can be filled. NOTE: Be sure to lubricate the Viton O-ring prior to installing either DSV valve.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFEATURES\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFuel Tank Venting\u003c\/span\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eOnce the tank is filled with fuel, the upper sealing ball valve floats to the top of the internal DSV chamber shutting off the air source. This safely prevents fuel from traveling up and out of the fuel cell vent line. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRoll Over Protection\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eIn case of an accident in which the wheels are up-ended, the lower stainless steel ball holds the ball valve down sealing the vent. This safely prevents fuel from leaking out of the fuel cell vent line. \u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNotes\u003c\/strong\u003e\u003c\/span\u003e \u003cbr data-mce-fragment=\"1\"\u003e1. \u003cstrong data-mce-fragment=\"1\"\u003eDSV and filler height relationship:\u003c\/strong\u003e The vertical height of the top (shut-off) ball in the dynamic safety valve should be positioned lower than the highest point of the fuel fill point.\u003cbr data-mce-fragment=\"1\"\u003e2. \u003cstrong data-mce-fragment=\"1\"\u003eFiller and vent height relationship:\u003c\/strong\u003e The vertical height of at least one portion of the vent tubing (not included) should be positioned above the highest point of the fuel fill point. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Fuel_Cell_Vent_Routing.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Fuel_Cell_Vent_Routing.jpg\"\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSTANDARD FILL DSV\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0435 DSV, 12AN ORB TO 8AN MALE, STD FILL\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis compact internal DSV valve can be used for fuel tanks that have -12AN ORB female threads. The external -8AN male fitting is used for all standard fuel filling. The 1-piece machined part is manufactured from billet 6061 aluminum and type-II anodized. Included are 2 ball valves, FKM Viton O-ring, and a stainless steel retaining ring. These materials are compatible with all fuel types including alcohol fuels such as methanol and E85. It can easily be disassembled for quick cleaning, inspection, and maintenance. NOTE: This DSV comes standard on the Radium 20-049X-XX FCST.\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0435.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0435.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eQUICK FILL DSV\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0535 DSV, 12AN ORB TO 12AN MALE, QUICK FILL, INTERNAL\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/span\u003eThis internal DSV valve can be used for fuel tanks that have -12AN ORB female threads (including the Radium 20-049X-XX FCST). The high flowing -12AN male fitting permits dry break applications that use dump cans for quick fuel filling. The 1-piece machined part is manufactured from billet 6061 aluminum and type-II anodized. Included are 2 ball valves, FKM Viton O-ring, and a stainless steel retaining ring. These materials are compatible with all fuel types including alcohol fuels such as methanol and E85. It can easily be disassembled for quick cleaning, inspection, and maintenance. \u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0535.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0535.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNote: This internally mounted DSV is perfect for pressureless \"vented\" dry break receivers such as Radium Engineering\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Dry-Break-Fuel-Fillers-P1617.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Dry-Break-Fuel-Fillers-P1617.aspx\"\u003e20-0495-V\u003c\/a\u003e,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Dry-Break-Fuel-Fillers-P1617.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Dry-Break-Fuel-Fillers-P1617.aspx\"\u003e20-0504-V\u003c\/a\u003e, and\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Dry-Break-Fuel-Fillers-P1617.aspx\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.radiumauto.com\/Dry-Break-Fuel-Fillers-P1617.aspx\"\u003e20-0549-V\u003c\/a\u003e.\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFUEL LEVEL ADAPTER\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e20-0439 12AN ORB to 5-Bolt SAE Adapter\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTo use a Radium Engineering DSV on an old FCST that has 8AN ORB vent threads (20-014X-XX), this adapter can be used.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0439.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0439.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHowever, a fuel level sender cannot be used with this adapter in place.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0439-INST2.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0439-INST2.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eREMOTE FITTING\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e14-0434 12AN ORB TO 12AN MALE\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis would be used if the external quick fill DSV needs to be remotely mounted off the fuel cell. It will secure directly into the 12AN ORB Vent Port on the 20-049X-XX FCST.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/14-0434.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/14-0434.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOr it can be used in conjunction with 20-0439 12AN ORB to 5-Bolt SAE Adapter for older FCST units.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0439-INST.jpg\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0439-INST.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39502020870211,"sku":null,"price":46.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0435-2.jpg?v=1703122283"},{"product_id":"fuel-cell-vent-kits","title":"Fuel Cell Vent Kits","description":"\u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003eThe vent permits air to escape as the fuel cell is filled and permits filtered air to enter when fuel is getting consumed. This allows the tank to breath to avoid pressurization during normal operation. \u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003chr\u003e\n\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e20-0484-08 Fuel Cell Vent Kit, 8AN\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThis kit is typically used for standard-fill systems with direct fill or remote fill necks. It includes an air filter, 1\/2\" fuel vent hose, and adapter fittings. The kit requires an 8AN male vent fitting. \u003cbr\u003eNOTE: This can be used with the standard vent fitting that is included with the Radium FCST.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0484-08.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003cbr\u003e\u003chr\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e20-0484-12 Fuel Cell Vent Kit, 12AN\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThis high flow kit is typically used for quick-fill systems that commonly use a dry break and dump can. It includes an air filter, 3\/4\" fuel vent hose, and adapter fittings. The kit requires a 12AN male vent fitting. \u003cbr\u003eNOTE: This can be used with Radium 20-0462 DSV, 12AN ORB to 12AN Male, Quick Fill.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0484-12.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003cbr\u003e\u003chr\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e20-0485 12AN Female Fitting to Air Filter\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThis is typically used with \u003ca href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\"\u003eRadium 20-0535 DSV, 12AN ORB to 12AN Male, Quick Fill, Internal\u003c\/a\u003e. It includes an air filter and a 12AN female adapter fitting. The kit requires a 12AN male vent fitting. \u003cbr\u003eNOTE: Because the top of the fuel fill tube should not be higher than the location of this air filter, this is commonly used in conjunction with direct fuel cell fill caps only (not remote fillers).\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0485.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003chr\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e20-0439 12AN ORB to 5-Bolt SAE Adapter\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThis adapter is commonly used with old FCST units (20-014X-XX) which had a small vent. It converts the fuel level flange to a large 12AN ORB vent.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0439.jpg\" alt=\"\"\u003e\u003cbr\u003eNOTE: a fuel level sender cannot be used with this adapter in place.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0439-INST2.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003chr\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eImportant steps to properly route the vent line and prevent unwanted fuel loss:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e1. From the fuel cell, the hose must first run upwards allowing any fuel captured in the vent line to drain back down into the cell. \u003cbr\u003e2. After ascending vertically, the line should briefly route towards the front of the vehicle to prevent fuel from sloshing out. \u003cbr\u003e3. Vertical loops should be added to act as a \"make-shift\" expansion chamber. This allows air to escape and any fuel to drop to the bottom of the loops. \u003cbr\u003e4. Depending on the application, the overall vertical height of the vent hose should be at least 12\". \u003cbr\u003e5. For remote fuel fill applications, the vertical loops must be higher than the fill point.\u003cbr\u003e6. The vent hose should terminate outside of the cabin, below and behind the fuel cell and away from the exhaust system.\u003cbr\u003e7. Utilizing an expansion chamber that is larger than the vent hose diameter will further aid in preventing liquid fuel from escaping (see \u003ca href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\"\u003eRadium 20-0462\u003c\/a\u003e).\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Fuel_Cell_Vent_Routing.jpg\" alt=\"\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"customFieldsWrapper\"\u003e\u003c\/div\u003e\n\n\n","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39518472994883,"sku":"TBS-f8478c5db7","price":33.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0484-12.jpg?v=1703122321"},{"product_id":"fcst-lift-pump-extension-for-deep-cells","title":"FCST Lift Pump Extension for Deep Cells","description":"\u003cdiv class=\"content\"\u003e\n                    \u003cp\u003e\n                        \n                    \u003c\/p\u003e\n\t\t\t\t    \u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n                        This kit is designed to mount the Fuel Cell Surge Tank's lift pump to the bottom of a deep fuel cell. The standard FCST lift pump brackets are designed for fuel cells that are no deeper than 10 inches (from the underside of the fill plate to the bottom of the lift pump filter sock). This extension kit permits an additional 8 inches over the standard brackets and will reach to the bottom of fuel cells that are up to 17\" deep.  \u003cbr\u003e\u003cbr\u003eThe kit includes two metal brackets that are laser cut and formed. Simply cut to length using a band saw, cut-off wheel, etc.\u003cbr\u003e\u003cbr\u003eLonger hose and\/or wiring may be necessary. Contact tech support for more details.\n                    \u003c\/div\u003e\n\t\t\t\t    \u003cdiv class=\"customFieldsWrapper\"\u003e\n\t\t\t\t\t    \n\t\t\t\t    \u003c\/div\u003e\n                \u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39518477123651,"sku":"rad20-0214","price":49.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0214-SS.jpg?v=1703122321"},{"product_id":"fuel-cell-mounting-tab-kit","title":"Fuel Cell Mounting Tab Kit","description":"\u003cdiv class=\"content\"\u003e\n                    \u003cp\u003e\n                        \n                    \u003c\/p\u003e\n\t\t\t\t    \u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n                        \u003cp\u003eThis kit can be used for fuel cells that use a 24-bolt (6x10) fill plate including FuelSafe, ATL, Jaz, Harmon, Pyrotect, etc. NOTE: Only compatible with the older Radium Engineering FCSTs (20-014X-XX and 20-049X-XX).\u003cbr\u003e\u003cbr\u003eDepending on the amount of fill plate accessories, the original mounting tabs may not suffice. Fortunately, this design uses 12 fill plate bolts (instead of 4 or 6) to distribute the load evenly across the fuel cell.\u003c\/p\u003e\n\u003cp\u003eThe 2-piece mounting tabs are laser cut from lightweight 5052 aluminum, deburred, and anodized black. Also included are 36 black nylon sealing washers (fill plate=24, mounting tabs=12).\u003c\/p\u003e\n                    \u003c\/div\u003e\n\t\t\t\t    \u003cdiv class=\"customFieldsWrapper\"\u003e\n\t\t\t\t\t    \n\t\t\t\t    \u003c\/div\u003e\n                \u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39518482071619,"sku":"rad20-0155","price":29.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/Fuel_Cell_Mounting_Tab_Kit.jpg?v=1703122321"},{"product_id":"dry-break-fuel-fillers","title":"Dry Break Fuel Fillers","description":"\u003cdiv class=\"content\"\u003e\n                    \u003cp\u003e\n                        \n                    \u003c\/p\u003e\n\t\t\t\t    \u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n                        \u003ca href=\"http:\/\/www.radiumauto.com\/Assets\/PublicDocs\/PublicDocs\/19-0207.pdf\"\u003eDirect Mount Fuel Filler Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Assets\/PublicDocs\/PublicDocs\/19-0208.pdf\"\u003eRemote Mount Fuel Filler Instructions\u003c\/a\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Assets\/PublicDocs\/PublicDocs\/19-0262.pdf\"\u003e\u003cbr\u003eDry Break Dust Cap Instructions\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"\/assets\/publicdocs\/publicdocs\/19-0272.pdf\" target=\"_blank\"\u003eDry Break Probe O-Ring Change Instructions\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eDry breaks allow quick fuel filling with no mess. The male dry break probe connects to a dump can fuel jug and the female dry break receiver installs on the vehicle's fuel filler. When the two couplings mesh together, both valve seals open and close with synchronized timing permitting no fuel leaks. Furthermore, it is no longer necessary to monitor the filling process when the dry break is used in conjunction with the \u003ca href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\"\u003e20-0535 Radium DSV Valve\u003c\/a\u003e as vented air flow is automatically shut down when full. NOTE: Radium Engineering dry break systems are compatible with other dry breaks of the same size. \u003cbr\u003eRefer to the \u003cspan style=\"font-size: medium;\"\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Blog\/Post\/Refueling-options-from-Radium-Engineering-112\" target=\"_blank\"\u003eblog article\u003c\/a\u003e\u003c\/span\u003e for more details on fuel cell filling.\u003cbr\u003e\u003chr\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e20-0496 DRY BREAK, 1.5IN, MALE\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eDesigned to install onto the fill spout of a dump can fuel jug. Anodized aluminum construction with stainless steel hardware featuring a 1.5\" OD barb. The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.). \u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0496.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eFiller Hose Requirement: 1.5\"\u003cbr\u003eMate: 20-0495-V, 20-0504-V, 20-0549-V\u003cbr\u003e\u003chr\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e20-0495-V DRY BREAK, 1.5IN, FEMALE, DIRECT MOUNT, VENTED\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eDesigned for direct mounting onto a fuel cell. For mating, a 6-bolt flange with a 2.18\" PCD bolt circle (as found on the \u003ca href=\"http:\/\/www.radiumauto.com\/FCST-Fuel-Cell-Surge-Tank-P1497.aspx\"\u003eFCST\u003c\/a\u003e) is required. Includes 20-0549-V Dry Break, 1.5in, Female, Vented as well as an aluminum housing, stainless steel hardware, and a gasket. The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.).\u003cbr\u003e\u003cstrong\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0495-V.jpg\" alt=\"\"\u003e\u003cbr\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eHeight: 3.43\" (Dry Break to Gasket)\u003cbr\u003eMate: 20-0496 Dry Break, 1.5in, Male\u003cbr\u003e\u003chr\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e20-0504-V DRY BREAK, 1.5IN, FEMALE, REMOTE MOUNT, VENTED\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eDesigned for remote mounting to an external surface such as a fender. Requires a 77mm (3.03\") hole to be fabricated. Includes 20-0549-V Dry Break, 1.5in, Female, Vented as well as a gasket, stainless steel hardware, an aluminum housing and aluminum nut ring. The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.).\u003cbr\u003e\u003cstrong\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0504-V.jpg\" alt=\"\"\u003e\u003cbr\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eFiller Hose Requirement: 1.5\"\u003cbr\u003eFlange Outer Diameter: 4.75\"\u003cbr\u003eBolt Circle Diameter: 4.25\" PCD\u003cbr\u003eHeight: 4.08\" (Dry Break to Barb)\u003cbr\u003eMate: 20-0496 Dry Break, 1.5in, Male\u003cbr\u003e\u003chr\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e20-0549-V DRY BREAK, 1.5IN, FEMALE, VENTED\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThreaded specifically to install into a Radium female dry break mount (not included). Anodized aluminum construction with stainless steel hardware and bronze bushings. The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.). \u003cbr\u003e\u003cstrong\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0549.jpg\" alt=\"\"\u003e\u003cbr\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eMates to 20-0496 Dry Break, 1.5in, Male\u003chr\u003e\n\u003chr\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eDRY BREAK ACCESSORIES\u003c\/strong\u003e\u003c\/span\u003e\u003chr\u003e\n\u003chr\u003e\n\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e15-0004 DRY BREAK PROBE COVER\u003cbr\u003e\u003c\/strong\u003eDesigned to protect dirt and debris from contaminating the dynamic elements of a 1.5\" dry break probe. Because it is manufactured from polyurethane leather, it does not dry out or absorb water making it easy to clean.  \u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/15-0004_Install1.jpg\" alt=\"\"\u003e\u003cbr\u003eThe internal elastic band prevents the cover from falling off in high winds. Radium Engineering golden rectangle embroidery on 2 sides.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/15-0004.jpg\" alt=\"\"\u003e\u003cbr\u003eTo install, simply spread the cover over the probe like a sock. To uninstall, simply pull the integrated handle upwards.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMating Parts:\u003c\/strong\u003e\u003cbr\u003eMates to 20-0496 Dry Break, 1.5in, Male\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003chr\u003e\n\u003cspan\u003e\u003cstrong\u003e20-0604 DRY BREAK DUST CAP\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eDesigned to install \u003cspan\u003especifically \u003c\/span\u003einto a Radium Engineering female dry break. It prevents dirt and debris from falling into the fuel tank during refueling.\u003cbr\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0604_with_Dry_Break-2.jpg?ts=054436\" alt=\"\"\u003e\u003cbr\u003eThe dust cap vents to balance internal fuel tank pressure changes. \u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dust_Cap-600x400.jpg\" alt=\"\"\u003e\u003cbr\u003eAnodized aluminum construction with stainless steel hardware and a tether assembly. The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.). \u003cbr\u003e\u003cstrong\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0604.jpg\" alt=\"\"\u003e\u003cbr\u003eMating Parts:\u003c\/strong\u003e\u003cbr\u003e1. 20-0495-V Dry Break, 1.5in, Female, Direct Mount, Vented\u003cbr\u003e2. 20-0504-V Dry Break, 1.5in, Female, Remote Mount, Vented\u003cbr\u003e3. 20-0549-V Dry Break, 1.5in, Female, Vented\u003cbr\u003e\u003chr\u003e\n                    \u003c\/div\u003e\n\t\t\t\t    \u003cdiv class=\"customFieldsWrapper\"\u003e\n\t\t\t\t\t    \n\t\t\t\t    \u003c\/div\u003e\n                \u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39518482989123,"sku":"20-0496","price":289.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0496.jpg?v=1703122321"},{"product_id":"fuel-cell-mounting-accessories","title":"Fuel Cell Mounting Accessories","description":"\u003cdiv class=\"content\"\u003e\n                    \u003cp\u003e\n                        \n                    \u003c\/p\u003e\n\t\t\t\t    \u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n                        \u003chr\u003e\n\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003e18-0015\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRadium Engineering gasket for \"industry standard\" 6x10 inch (24-bolt) fuel cells. Unlike others constructed from cork or paper, this seal is die cut from a premium quality variation of FKM Viton. \u003cbr\u003eThe Radium gasket is 1\/16\" thick and reuseable. Compatible with the \u003ca href=\"http:\/\/www.radiumauto.com\/FCST-Fuel-Cell-Surge-Tank-P1497.aspx\"\u003eRadium Fuel Cell Surge Tank\u003c\/a\u003e.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/18-0015.jpg\" alt=\"\" width=\"600\" height=\"397\"\u003e\u003cbr\u003e\u003chr\u003e\n\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003e20-0278\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eFuel cell 6x10 inch, 24-bolt weld flange. CNC machined from 6061 billet aluminum and flycut to 0.24\" thickness. Includes gasket.\u003cbr\u003eIdeal for weldeing to aluminum tank. Welding must be done by an experienced welder who can prevent warping of the flange.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/14-0284_WELD_FLANGE.jpg\" alt=\"\" width=\"600\" height=\"397\"\u003e\u003cbr\u003eHoles are tapped for 1\/4\"-28 fasteners. Great for custom fuel cells. Compatible with the \u003ca href=\"http:\/\/www.radiumauto.com\/FCST-Fuel-Cell-Surge-Tank-P1497.aspx\"\u003eRadium Fuel Cell Surge Tank\u003c\/a\u003e.\u003cbr\u003e\u003chr\u003e\n\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003e14-0584\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThis nut ring is manufactured from 6061 aluminum and is anodized to permit all fuel types and to prevent corrosion. All threaded holes are tapped for 1\/4\"-28 using the industry standard 6x10 pattern. It was designed to bolt into Radium RA-series fuel cells but can work with others. Gasket not included.\u003cbr\u003e\u003cimg src=\"..\/..\/Assets\/ProductDesc\/14-0584.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\n                    \u003c\/div\u003e\n\t\t\t\t    \u003cdiv class=\"customFieldsWrapper\"\u003e\n\t\t\t\t\t    \n\t\t\t\t    \u003c\/div\u003e\n                \u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39518487707715,"sku":null,"price":28.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/14-0284_WELD_FLANGE.jpg?v=1703122321"},{"product_id":"fuel-cell-foam","title":"Fuel Cell Foam","description":"\u003cdiv class=\"content\"\u003e\n                    \u003cp\u003e\n                        \n                    \u003c\/p\u003e\n\t\t\t\t    \u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n                        Mandated by the FiA, fuel cell foam is used both as an explosion suppressant as well as baffling. This reticulated foam is manufactured from polyurethane and meets MIL-DTL-83054C Type-II. At 15 pores per inch (nominal), it displaces only 0.07 gallons (or 9oz) of fuel per foam piece.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/18-0066.jpg\" alt=\"\"\u003e\u003cbr\u003eAfter every race season, inspect the condition of fuel cell foam and replace at least every 3 seasons. While it was designed for longevity in hydrocarbon fuels, Radium has also performed thorough testing with high content alcohol fuels (ethanol and methanol). These test have shown no signs of foam deterioration. However, it is advised to do more frequent inspections as alcohol could potentially shorten the foam life span. \u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eNOTE: All Radium Engineering fuel cells come preassembled with this exact foam.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003chr\u003e\n\u003cspan\u003e\u003cstrong\u003eBENEFITS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e-Limits fuel aeration for starvation protection insuring constant delivery to the pickup.\u003cbr\u003e-Keeps weight transfer to a minimum during cornering, acceleration, and braking.\u003cbr\u003e-Displaces fuel vapors, reducing explosion potential.\u003cbr\u003e\u003chr\u003e\n\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003e18-0066 (\u003cstrong\u003eSOLD INDIVIDUALLY)\u003cbr\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/span\u003eThe is half a block of fuel cell foam that is used in Radium Engineering RA-Series fuel cells.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/18-0066_Dimensions.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eRA-SERIES FUEL CELL FOAM SERVICING\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cem\u003eNOTE: Foam is inserted through the 6\"x10\" opening.\u003c\/em\u003e\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/productDESC\/fuelcell75.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFuel Cell: 6 Gallon Radium R06A\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eQuantity Required: 2\u003cbr\u003eModifications: Cut each end 4.95\" shorter\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFuel Cell: 10 Gallon Radium R10A\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eQuantity Required: 2\u003cbr\u003eModifications: None\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFuel Cell: 15 Gallon Radium R15A\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eQuantity Required: 3\u003cbr\u003eModifications: Cut 1 piece in half longways\u003cbr\u003e\u003chr\u003e\n\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e18-0074 (\u003cstrong\u003eSOLD INDIVIDUALLY)\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eThe is a universal block of fuel cell foam that can be custom fit in fuel surge tanks, OEM gas tanks, fabricated fuel tanks, etc.\u003cstrong\u003e\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/18-0074.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003cbr\u003eDimensions:\u003cbr\u003e\u003c\/strong\u003e\u003c\/strong\u003e12.5\" x 7.0\" x 4.7\" (or 318mm x 178mm x 119mm)\u003cstrong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003chr\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\n                    \u003c\/div\u003e\n\t\t\t\t    \u003cdiv class=\"customFieldsWrapper\"\u003e\n\t\t\t\t\t    \n\t\t\t\t    \u003c\/div\u003e\n                \u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39518488854595,"sku":null,"price":14.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/18-0066.jpg?v=1703122325"},{"product_id":"replacement-fuel-cell-cans","title":"Replacement Fuel Cell Cans","description":"\u003cdiv class=\"content\"\u003e\n                    \u003cp\u003e\n                        \n                    \u003c\/p\u003e\n\t\t\t\t    \u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n                        This is a replacement for the aluminum can that protects the internal fuel bladder. Compatible with Radium RA-series fuel cells.\u003cbr\u003e\u003chr\u003eEach replacement fuel cell can contains the following:\u003cbr\u003e-Black Powder Coated Aluminum Lid\u003cbr\u003e-Black Powder Coated Aluminum Bottom\u003cbr\u003e-Radium Engineering Adhesive Decals\u003cbr\u003e-Stainless Steel Hardware\n                    \u003c\/div\u003e\n\t\t\t\t    \u003cdiv class=\"customFieldsWrapper\"\u003e\n\t\t\t\t\t    \n\t\t\t\t    \u003c\/div\u003e\n                \u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39518498422851,"sku":null,"price":322.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0670n.jpg?v=1703122326"},{"product_id":"replacement-fuel-cell-bladders","title":"Replacement Fuel Cell Bladders","description":"\u003cdiv class=\"content\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003eThese are replacement bladders for Radium RA-series fuel cells. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e-Fuel Cell Bladder\u003cbr\u003e-Fuel Cell Foam\u003cbr\u003e-FiA Certification\u003cbr\u003e-SFI Certification\u003cbr\u003e\u003cimg alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/FiA_SFI_cert.jpg\"\u003e\u003cbr\u003eDoes NOT include nut ring or fasteners. \u003cbr\u003e\u003chr\u003eCompatible with Radium RA-series fuel cells. \u003cbr\u003e\u003chr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"customFieldsWrapper\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":39518509826115,"sku":null,"price":341.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20-0650_with_foam.jpg?v=1703122325"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/collections\/radium-template_48396c98-0cc3-409d-9d44-f646778175eb.png?v=1703120668","url":"https:\/\/www.tunedbyshawn.com\/collections\/radium-fuel-cells.oembed?page=3","provider":"Tuned by Shawn","version":"1.0","type":"link"}