{"title":"Fuel System","description":"\u003cp\u003eOur complete fuel system range covering injectors, pumps, rails, regulators, and fittings from brands like Injector Dynamics, Radium Engineering, and Walbro. Fueling is half of every tune, and this collection covers builds from mild street setups to full E85 drag cars. Not sure what supports your power goal? Ask us.\u003c\/p\u003e","products":[{"product_id":"tuned-by-shawn-ethanol-content-sensor-flex-fuel","title":"Tuned By Shawn Ethanol Content Sensor (Flex-fuel)","description":"\u003cp\u003eIf your looking to purchase an aftermarket Ethanol Content Sensor for flex Fuel this is what we recommend. These sensors have 3 wires going to them - 12V power, Sensor ground, and Signal Output. Sensor has Pin locations labeled on the sensor. Additionally these sensors not only read Ethanol content they also read fuel temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEthanol Content Sensor \u003c\/li\u003e\n\u003cli\u003eConnector with associated pins \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Tuned By Shawn","offers":[{"title":"Default Title","offer_id":17419813322819,"sku":"GM13577429","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/20190115_142503.jpg?v=1783194165"},{"product_id":"ht-038002-fuel-level-sender-signal-conditioner","title":"Fuel Level Sender Signal Conditioner (HT-038002)","description":"\u003cp\u003eSmall part, real job. Fuel Level Sender Signal Conditioner and does it the way the rest of a Haltech system expects.\u003c\/p\u003e\n\u003cp\u003eCorrect pinouts the first time, labelled circuits that make diagnosis simple, and factory-grade terminations with no splices to suspect later.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: HT-038002\u003c\/li\u003e\n\u003cli\u003eOutputs: Filters a resistive signal for use with an Analogue Voltage Input (AVI).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eHT-031016 - Matching Set of Deutsch DTM 4 Connectors.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eSold and supported by Tuned By Shawn, Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885227075,"sku":"HT-038002","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-038002_00.jpg?v=1703120894"},{"product_id":"ht-030300-plug-and-pins-only-bosch-ev1-square-2-pin","title":"Plug and Pins Only - Bosch EV1 (Square) 2 Pin Junior Timer Female Connector (HT-030300)","description":"\u003cp\u003ePlug and Pins Only - Bosch EV1 (Square) 2 Pin Junior Timer Female Connector: the right part for a clean, reliable installation. Bosch Style Fuel Injectors HT-010306 - Oil Temperature sensor High Range 150°C - 1\/8 NPT HT-011100 - Knock Sensor -Genuine Bosch suit 8mm (5\/16\") mounting bolt HT-020110 - Bosch HEC Single High Power Inductive coil HT-020308 - Idle Air Control Valve Bosch BAC\/PWM 2 port\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-030300\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003ePack of 2 Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eBosch Style Fuel Injectors HT-010306 - Oil Temperature sensor High Range 150°C - 1\/8 NPT HT-011100 - Knock Sensor -Genuine Bosch suit 8mm (5\/16\") mounting bolt HT-020110 - Bosch HEC Single High Power Inductive coil HT-020308 - Idle Air Control Valve Bosch BAC\/PWM 2 port.\u003c\/p\u003e\n\u003cp\u003eFrom Tuned By Shawn, Platinum Haltech Dealer, with fitment help a message away.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885259843,"sku":"HT-030300","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-030300_00.jpg?v=1703120894"},{"product_id":"ht-030303-plug-and-pins-only-us-ev6-type-injectors","title":"Plug and Pins Only - US EV6 Type Injectors (HT-030303)","description":"\u003cp\u003ePlug and Pins Only - US EV6 Type Injectors. Genuine Haltech hardware, built to integrate with the rest of the system.\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: HT-030303\u003c\/li\u003e\n\u003cli\u003eNotes: Also suits ID1000 injectors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003ePack of 2 Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eIn stock at Tuned By Shawn, your Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885292611,"sku":"HT-030303","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-030303_00.jpg?v=1703120894"},{"product_id":"ht-030304-plug-and-pins-only-id-bosch-2000","title":"Plug and Pins Only - ID\/Bosch 2000 Denso Oval Type Injectors (HT-030304)","description":"\u003cp\u003ePlug and Pins Only - ID\/Bosch 2000 Denso Oval Type Injectors: the right part for a clean, reliable installation. \u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-030304\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003ePack of 2 Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eFrom Tuned By Shawn, Platinum Haltech Dealer, with fitment help a message away.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885358147,"sku":"HT-030304","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-030304_00.jpg?v=1703120894"},{"product_id":"ht-030310-plug-and-pins-only-bosch-3-pin","title":"Plug and Pins Only - Bosch 3 Pin Junior Timer Female Connector (HT-030310)","description":"\u003cp\u003eSmall part, real job. Plug and Pins Only - Bosch 3 Pin Junior Timer Female Connector suits hT-010402 - Throttle Position Sensor -Grey CW Rotation 8mm D-Shaft HT-010404 - Throttle Position Sensor -Black CCW Rotation 8mm D-Shaft and does it the way the rest of a Haltech system expects.\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-030310\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003ePack of 3 Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eHT-010402 - Throttle Position Sensor -Grey CW Rotation 8mm D-Shaft HT-010404 - Throttle Position Sensor -Black CCW Rotation 8mm D-Shaft.\u003c\/p\u003e\n\u003cp\u003eSold and supported by Tuned By Shawn, Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885390915,"sku":"HT-030310","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-030310_00.jpg?v=1703120899"},{"product_id":"ht-030311-plug-and-pins-only-bosch-4-pin","title":"Plug and Pins Only - Bosch 4 Pin Junior Timer Female Connector (HT-030311)","description":"\u003cp\u003ePlug and Pins Only - Bosch 4 Pin Junior Timer Female Connector. HT-020006 - Quad Channel OEM Igniter (Coil output\/Drive side only) HT-010604 - S3 - Black Dual Channel Hall Effect Sensor HT-010606 - S4 - Grey Dual Channel Hall Effect Sensor Genuine Haltech hardware, built to integrate with the rest of the system.\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-030311\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003ePack of 4 Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eHT-020006 - Quad Channel OEM Igniter (Coil output\/Drive side only) HT-010604 - S3 - Black Dual Channel Hall Effect Sensor HT-010606 - S4 - Grey Dual Channel Hall Effect Sensor.\u003c\/p\u003e\n\u003cp\u003eIn stock at Tuned By Shawn, your Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885423683,"sku":"HT-030311","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-030311_00.jpg?v=1703120899"},{"product_id":"ht-030312-plug-and-pins-only-bosch-5-pin","title":"Plug and Pins Only - Bosch 5 Pin Junior Timer Female Connector (HT-030312)","description":"\u003cp\u003ePlug and Pins Only - Bosch 5 Pin Junior Timer Female Connector: the right part for a clean, reliable installation. HT-020006 - Quad Channel OEM Igniter (ECU control\/Switch side only)\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-030312\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003ePack of 5 Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eHT-020006 - Quad Channel OEM Igniter (ECU control\/Switch side only).\u003c\/p\u003e\n\u003cp\u003eFrom Tuned By Shawn, Platinum Haltech Dealer, with fitment help a message away.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885456451,"sku":"HT-030312","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-030312_00.jpg?v=1703120899"},{"product_id":"ht-030314-plug-and-pins-only-bosch-7-pin","title":"Plug and Pins Only - Bosch 7 Pin Junior Timer Female Connector (HT-030314)","description":"\u003cp\u003eSmall part, real job. Plug and Pins Only - Bosch 7 Pin Junior Timer Female Connector suits hT-020002 - Dual Channel OEM Igniter HT-020004 - Triple Channel OEM Igniter and does it the way the rest of a Haltech system expects.\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-030314\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003ePack of 7 Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eHT-020002 - Dual Channel OEM Igniter HT-020004 - Triple Channel OEM Igniter.\u003c\/p\u003e\n\u003cp\u003eSold and supported by Tuned By Shawn, Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885489219,"sku":"HT-030314","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-030314_00.jpg?v=1703120899"},{"product_id":"ht-031000-plug-and-pins-only-male-deutsch-dtm-2-connector","title":"Plug and Pins Only - Male Deutsch DTM-2 Connector (7.5 Amp) (HT-031000)","description":"\u003cp\u003eSmall part, real job. Plug and Pins Only - Male Deutsch DTM-2 Connector (7.5 Amp) suits hT-010206 - Air Temp Sensor - 1\/8 NPT Thread HT-010304 - Coolant Temp Sensor - 1\/8 NPT Thread and does it the way the rest of a Haltech system expects.\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-031000\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eMale Plug, Wedgelock Seal \u0026amp; Female Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eHT-010206 - Air Temp Sensor - 1\/8 NPT Thread HT-010304 - Coolant Temp Sensor - 1\/8 NPT Thread.\u003c\/p\u003e\n\u003cp\u003eSold and supported by Tuned By Shawn, Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885521987,"sku":"HT-031000","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-031000_00.jpg?v=1703120899"},{"product_id":"ht-031001-plug-and-pins-only-male-deutsch-dtm-3-connector","title":"Plug and Pins Only - Male Deutsch DTM-3 Connector (7.5 Amp) (HT-031001)","description":"\u003cp\u003ePlug and Pins Only - Male Deutsch DTM-3 Connector (7.5 Amp). HT-010134 - 3 Bar Motorsport MAP Sensor HT-010136 - 4 Bar Motorsport MAP Sensor Genuine Haltech hardware, built to integrate with the rest of the system.\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-031001\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eMale Plug, Wedgelock Seal \u0026amp; Female Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eHT-010134 - 3 Bar Motorsport MAP Sensor HT-010136 - 4 Bar Motorsport MAP Sensor.\u003c\/p\u003e\n\u003cp\u003eIn stock at Tuned By Shawn, your Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885554755,"sku":"HT-031001","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-031001_00.jpg?v=1703120904"},{"product_id":"ht-031002-plug-and-pins-only-male-deutsch-dtm-4-connector","title":"Plug and Pins Only - Male Deutsch DTM-4 Connector (7.5 Amp) (HT-031002)","description":"\u003cp\u003ePlug and Pins Only - Male Deutsch DTM-4 Connector (7.5 Amp): the right part for a clean, reliable installation. Elite ECU CAN port (on ECU and\/or Harness)\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-031002\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eMale Plug, Wedgelock Seal \u0026amp; Female Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eElite ECU CAN port (on ECU and\/or Harness).\u003c\/p\u003e\n\u003cp\u003eFrom Tuned By Shawn, Platinum Haltech Dealer, with fitment help a message away.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885587523,"sku":"HT-031002","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-031002_00.jpg?v=1703120904"},{"product_id":"ht-031012-plug-and-pins-only-matching-set-of-deutsch-dtm-2","title":"Plug and Pins Only - Matching Set of Deutsch DTM-2 Connectors (7.5 Amp) (HT-031012)","description":"\u003cp\u003eSmall part, real job. Plug and Pins Only - Matching Set of Deutsch DTM-2 Connectors (7.5 Amp) and does it the way the rest of a Haltech system expects.\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-031012\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eMale Plug, Female Receptacle\/Socket, Wedgelocks, Seals, Male \u0026amp; Female Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eSold and supported by Tuned By Shawn, Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885620291,"sku":"HT-031012","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-031012_00.jpg?v=1703120904"},{"product_id":"ht-031013-plug-and-pins-only-matching-set-of-deutsch-dtm-3","title":"Plug and Pins Only - Matching Set of Deutsch DTM-3 Connectors (7.5 Amp) (HT-031013)","description":"\u003cp\u003ePlug and Pins Only - Matching Set of Deutsch DTM-3 Connectors (7.5 Amp). Genuine Haltech hardware, built to integrate with the rest of the system.\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-031013\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eMale Plug, Female Receptacle\/Socket, Wedgelocks, Seals, Male \u0026amp; Female Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eIn stock at Tuned By Shawn, your Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885653059,"sku":"HT-031013","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-031013_00.jpg?v=1703120905"},{"product_id":"ht-031014-plug-and-pins-only-matching-set-of-deutsch-dtm-4","title":"Plug and Pins Only - Matching Set of Deutsch DTM-4 Connectors (7.5 Amp) (HT-031014)","description":"\u003cp\u003ePlug and Pins Only - Matching Set of Deutsch DTM-4 Connectors (7.5 Amp): the right part for a clean, reliable installation. \u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-031014\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eMale Plug, Female Receptacle\/Socket, Wedgelocks, Seals, Male \u0026amp; Female Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eFrom Tuned By Shawn, Platinum Haltech Dealer, with fitment help a message away.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885685827,"sku":"HT-031014","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-031014_00.jpg?v=1703120906"},{"product_id":"ht-031015-plug-and-pins-only-matching-set-of-deutsch-dtm-6","title":"Plug and Pins Only - Matching Set of Deutsch DTM-6 Connectors (7.5 Amp) (HT-031015)","description":"\u003cp\u003eSmall part, real job. Plug and Pins Only - Matching Set of Deutsch DTM-6 Connectors (7.5 Amp) and does it the way the rest of a Haltech system expects.\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-031015\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eMale Plug, Female Receptacle\/Socket, Wedgelocks, Seals, Male \u0026amp; Female Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eSold and supported by Tuned By Shawn, Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885718595,"sku":"HT-031015","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-031015_00.jpg?v=1703120909"},{"product_id":"ht-031051-pins-only-female-pins-to-suit-male-deutsch-dtm","title":"Pins only - Female pins to suit Male Deutsch DTM Connectors (Size 20, 7.5 Amp) (HT-031051)","description":"\u003cp\u003ePins only - Female pins to suit Male Deutsch DTM Connectors (Size 20, 7.5 Amp): the right part for a clean, reliable installation. \u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-031051\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003ePack of 10 Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eFrom Tuned By Shawn, Platinum Haltech Dealer, with fitment help a message away.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885751363,"sku":"HT-031051","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-031051_00.jpg?v=1703120909"},{"product_id":"ht-030420-plug-and-pins-only-delco-weather-pack-3-pin","title":"Plug and Pins Only - Delco Weather Pack 3 pin GM Style MAP Sensor Connector - Orange (HT-030420)","description":"\u003cp\u003ePlug and Pins Only - Delco Weather Pack 3 pin GM Style MAP Sensor Connector - Orange: the right part for a clean, reliable installation. HT-010104 - 3 Bar GM MAP Sensor HT-010106 - 4 Bar GM MAP Sensor\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-030420\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003ePack of 3 Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eHT-010104 - 3 Bar GM MAP Sensor HT-010106 - 4 Bar GM MAP Sensor.\u003c\/p\u003e\n\u003cp\u003eFrom Tuned By Shawn, Platinum Haltech Dealer, with fitment help a message away.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405885784131,"sku":"HT-030420","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-030420_00.jpg?v=1703120910"},{"product_id":"ht-030410-plug-and-pins-only-delphi-2-pin-gm-style","title":"Plug and Pins Only - Delphi 2 Pin GM style Air Temp Connector (Grey) (HT-030410)","description":"\u003cp\u003ePlug and Pins Only - Delphi 2 Pin GM style Air Temp Connector (Grey). HT-010200 - Air Temp Sensor - Small Thread HT-010202 - Air Temp Sensor - Large Thread HT-010204 - Air Temp Sensor - 1\/4 NPT Thread Genuine Haltech hardware, built to integrate with the rest of the system.\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-030410\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003ePack of 2 Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eHT-010200 - Air Temp Sensor - Small Thread HT-010202 - Air Temp Sensor - Large Thread HT-010204 - Air Temp Sensor - 1\/4 NPT Thread.\u003c\/p\u003e\n\u003cp\u003eIn stock at Tuned By Shawn, your Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405903806531,"sku":"HT-030410","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-030410_00.jpg?v=1703121083"},{"product_id":"ht-030411-plug-and-pins-only-delphi-2-pin-gm-style","title":"Plug and Pins Only - Delphi 2 Pin GM style Coolant Temp Connector (Black) (HT-030411)","description":"\u003cp\u003ePlug and Pins Only - Delphi 2 Pin GM style Coolant Temp Connector (Black): the right part for a clean, reliable installation. HT-010300 - Coolant Temp Sensor - Small Thread HT-010302 - Coolant Temp Sensor - Large Thread\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-030411\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003ePack of 2 Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eHT-010300 - Coolant Temp Sensor - Small Thread HT-010302 - Coolant Temp Sensor - Large Thread.\u003c\/p\u003e\n\u003cp\u003eFrom Tuned By Shawn, Platinum Haltech Dealer, with fitment help a message away.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405903839299,"sku":"HT-030411","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-030411_00.jpg?v=1703121084"},{"product_id":"ht-030412-plug-and-pins-only-delphi-3-pin","title":"Plug and Pins Only - Delphi 3 Pin Pressure Sensor Connector (HT-030412)","description":"\u003cp\u003eSmall part, real job. Plug and Pins Only - Delphi 3 Pin Pressure Sensor Connector suits hT-010110 - 5 Bar TI MAP Sensor HT-010138 - 5 Bar Motorsport MAP Sensor HT-010130 - 7 Bar TI MAP Sensor HT-010904 - 150 PSI TI Pressure Sensor HT-010910 - 150 PSI Pressure Sensor HT-010906 - 250 PSI TI Pressure Sensor HT-010912 - 250 PSI Pressure Sensor HT-010908 - 2000 PSI Pressure Sensor and does it the way the rest of a Haltech system expects.\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-030412\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003ePack of 3 Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eHT-010110 - 5 Bar TI MAP Sensor HT-010138 - 5 Bar Motorsport MAP Sensor HT-010130 - 7 Bar TI MAP Sensor HT-010904 - 150 PSI TI Pressure Sensor HT-010910 - 150 PSI Pressure Sensor HT-010906 - 250 PSI TI Pressure Sensor HT-010912 - 250 PSI Pressure Sensor HT-010908 - 2000 PSI Pressure Sensor.\u003c\/p\u003e\n\u003cp\u003eSold and supported by Tuned By Shawn, Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405903872067,"sku":"HT-030412","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-030412_00.jpg?v=1703121086"},{"product_id":"ht-030414-plug-and-pins-only-delphi-3-pin","title":"Plug and Pins Only - Delphi 3 Pin Single Row Flat Coil Connector (HT-030414)","description":"\u003cp\u003ePlug and Pins Only - Delphi 3 Pin Single Row Flat Coil Connector. HT-020112 - High Output Inductive Coil suit HPI modules HT-020132 - High Output CDI Coil Genuine Haltech hardware, built to integrate with the rest of the system.\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-030414\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003ePack of 3 Pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eHT-020112 - High Output Inductive Coil suit HPI modules HT-020132 - High Output CDI Coil.\u003c\/p\u003e\n\u003cp\u003eIn stock at Tuned By Shawn, your Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405903904835,"sku":"HT-030414","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-030414_00.jpg?v=1703121086"},{"product_id":"ht-010504-12-position-rotary-trim-module","title":"12 Position Rotary Trim Module (Boost\/Fuel\/Ign etc) (HT-010504)","description":"\u003cp\u003e12 Position Rotary Trim Module (Boost\/Fuel\/Ign etc) adds a channel your calibration can trust. Genuine Haltech-supplied hardware, matched to Haltech ECU inputs and calibrations in the software.\u003c\/p\u003e\n\u003ch2\u003eWhat You'll See\u003c\/h2\u003e\n\u003cp\u003eMore of the engine and chassis in your logs: every added input is a channel you can tune from, alarm on, and diagnose with, and every added output is a device the ECU can control.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-010504\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eIn stock at Tuned By Shawn, your Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405907411011,"sku":"HT-010504","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010504_00.jpg?v=1703121143"},{"product_id":"ht-011000-flex-fuel-composition-sensor","title":"Flex Fuel Composition Sensor (HT-011000)","description":"\u003cp\u003eThis is the sensor that makes flex fuel tuning work. Plumbed inline in the fuel supply, it continuously measures the ethanol percentage and temperature of the fuel actually flowing to the engine and reports both to your Haltech ECU. With that signal connected, the ECU blends fuel volume, ignition timing, and boost targets by ethanol content automatically, so the car runs correctly on straight pump gas, E85, or any mix in between without touching the laptop.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You'll See\u003c\/h2\u003e\n\u003cp\u003eLive ethanol content as a channel on your dash, in your logs, and in ESP or NSP while tuning. No more guessing what the last fill actually was: if the E85 at the pump is really E70 that week, the number on screen says so and the ECU compensates before it ever becomes a knock event. Fuel temperature comes through on the same sensor, giving your tuner one more channel for diagnosing hot restart and heat soak fueling. For a boosted flex fuel build, this single input is the difference between one calibration that covers every fuel and a folder of maps you have to swap manually.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures ethanol content from E0 to E100 plus fuel temperature in one sensor\u003c\/li\u003e\n\u003cli\u003eDirect digital input to Haltech Elite and Nexus flex fuel inputs, no interim module needed\u003c\/li\u003e\n\u003cli\u003eEnables tuning of fuel, ignition, and boost by ethanol content\u003c\/li\u003e\n\u003cli\u003eInline installation using 3\/8\" GM Spring Lock fittings\u003c\/li\u003e\n\u003cli\u003eMatching connector plug and 3 pins included for a clean harness termination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: HT-011000\u003c\/li\u003e\n\u003cli\u003eFittings: suits 3\/8\" GM Spring Lock\u003c\/li\u003e\n\u003cli\u003eOutput: ethanol content and fuel temperature\u003c\/li\u003e\n\u003cli\u003eAdaptor fittings to suit AN plumbing are available separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFlex fuel composition sensor\u003c\/li\u003e\n\u003cli\u003eMatching plug and 3 pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eUniversal fit for any flex fuel capable Haltech installation: Elite 750 through Elite 2500 T, Nexus S and R series, and Elite PRO Plug-in ECUs. Plumb it in the feed line between tank and rail, wire the three pins to the flex input, and enable flex fuel in the software.\u003c\/p\u003e\n\n\u003cp\u003eTuned By Shawn is a Platinum Haltech Dealer. If you are adding flex fuel to an existing Haltech tune, a remote session over live Zoom is the fastest way to get the blend tables set up and verified on your car.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405907902531,"sku":"HT-011000","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-011000_00.jpg?v=1703121154"},{"product_id":"ht-011001-plug-and-pins-only-flex-fuel-composition-sensor","title":"Plug and Pins Only - Flex Fuel Composition Sensor (HT-011001)","description":"\u003cp\u003ePlug and Pins Only - Flex Fuel Composition Sensor. Genuine Haltech hardware, built to integrate with the rest of the system.\u003c\/p\u003e\n\u003cp\u003eFactory-correct connectors and terminals are the difference between a harness that seals, clicks, and survives vibration and one that backs a pin out at the worst possible time.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-011001\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003ePack of 3 pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eIn stock at Tuned By Shawn, your Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405907935299,"sku":"HT-011001","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-011001_00.jpg?v=1703121153"},{"product_id":"ht-011030-flex-fuel-fittings-3-8-gm-spring-lock","title":"Flex Fuel Fittings 3\/8 \"GM Spring Lock\"-6AN Male (HT-011030)","description":"\u003cp\u003eFlex Fuel Fittings 3\/8 \"GM Spring Lock\"-6AN Male adds a channel your calibration can trust. GM Flex Fuel Sensors. Genuine Haltech-supplied hardware, matched to Haltech ECU inputs and calibrations in the software.\u003c\/p\u003e\n\u003ch2\u003eWhat You'll See\u003c\/h2\u003e\n\u003cp\u003eLive ethanol content and fuel temperature, so the ECU blends fuel, timing, and boost to whatever is actually in the tank and the logs prove what the fuel really was.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eSKU: HT-011030\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eTwo fittings.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eGM Flex Fuel Sensors.\u003c\/p\u003e\n\u003cp\u003eIn stock at Tuned By Shawn, your Platinum Haltech Dealer.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405907968067,"sku":"HT-011030","price":62.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-011030_00.jpg?v=1703121154"},{"product_id":"ht-010910-150-psi-motorsport-fuel-oil-wastegate","title":"150 PSI Motorsport Fuel\/Oil\/Wastegate Pressure Sensor (Stainless Steel Diaphragm) (HT-010910)","description":"\u003cp\u003e150 PSI Motorsport Fuel\/Oil\/Wastegate Pressure Sensor (Stainless Steel Diaphragm) adds a channel your calibration can trust. Genuine Haltech-supplied hardware, matched to Haltech ECU inputs and calibrations in the software.\u003c\/p\u003e\n\u003ch2\u003eWhat You'll See\u003c\/h2\u003e\n\u003cp\u003eThe pressure that matters, live on the dash and in every log. Fuel pressure trending down under load flags a failing pump before it costs an engine. Oil pressure per corner of the track shows surge before a bearing sees it. Wastegate dome pressure confirms boost control is doing what the strategy says.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: HT-010910\u003c\/li\u003e\n\u003cli\u003eThread: 1\/8 NPT\u003c\/li\u003e\n\u003cli\u003eNotes: Motorsport Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eMatching Delphi plug and 3 pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eCheck the notes above before ordering; if anything is unclear, send us your setup details and we will confirm.\u003c\/p\u003e\n\u003cp\u003eAs a Platinum Haltech Dealer, Tuned By Shawn can confirm fitment for your exact setup before you order, and remote tuning over live Zoom is available once everything is installed.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908262979,"sku":"HT-010910","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010910_00.jpg?v=1703121160"},{"product_id":"ht-010912-250-psi-motorsport-fuel-oil-wastegate","title":"250 PSI Motorsport Fuel\/Oil\/Wastegate Pressure Sensor (Stainless Steel Diaphragm) (HT-010912)","description":"\u003cp\u003e250 PSI Motorsport Fuel\/Oil\/Wastegate Pressure Sensor (Stainless Steel Diaphragm): accurate data where the tune needs it. Direct compatibility with Haltech ECU inputs, with calibrations already in the software.\u003c\/p\u003e\n\u003ch2\u003eWhat You'll See\u003c\/h2\u003e\n\u003cp\u003eThe pressure that matters, live on the dash and in every log. Fuel pressure trending down under load flags a failing pump before it costs an engine. Oil pressure per corner of the track shows surge before a bearing sees it. Wastegate dome pressure confirms boost control is doing what the strategy says.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: HT-010912\u003c\/li\u003e\n\u003cli\u003eThread: 1\/8 NPT\u003c\/li\u003e\n\u003cli\u003eNotes: Motorsport Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eMatching Delphi plug and 3 pins.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eCheck the notes above before ordering; if anything is unclear, send us your setup details and we will confirm.\u003c\/p\u003e\n\u003cp\u003eTuned By Shawn is a Platinum Haltech Dealer with in-house wiring and remote tuning services. If this needs to integrate with a larger build plan, ask and we will spec the full parts list.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908295747,"sku":"HT-010912","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010912_00.jpg?v=1703121159"},{"product_id":"ht-010904-150-psi-ti-fuel-oil-wastegate-pressure-sensor","title":"150 PSI \"TI\" Fuel\/Oil\/Wastegate Pressure Sensor (HT-010904)","description":"\u003cp\u003e150 PSI \"TI\" Fuel\/Oil\/Wastegate Pressure Sensor adds a channel your calibration can trust. Genuine Haltech-supplied hardware, matched to Haltech ECU inputs and calibrations in the software.\u003c\/p\u003e\n\u003ch2\u003eWhat You'll See\u003c\/h2\u003e\n\u003cp\u003eThe pressure that matters, live on the dash and in every log. Fuel pressure trending down under load flags a failing pump before it costs an engine. Oil pressure per corner of the track shows surge before a bearing sees it. Wastegate dome pressure confirms boost control is doing what the strategy says.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: HT-010904\u003c\/li\u003e\n\u003cli\u003eThread: 1\/8 NPT\u003c\/li\u003e\n\u003cli\u003eNotes: \"TI\" Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eMatching Delphi plug and 3 pins, -4 AN adaptor.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eCheck the notes above before ordering; if anything is unclear, send us your setup details and we will confirm.\u003c\/p\u003e\n\u003cp\u003eAs a Platinum Haltech Dealer, Tuned By Shawn can confirm fitment for your exact setup before you order, and remote tuning over live Zoom is available once everything is installed.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908328515,"sku":"HT-010904","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010904_00.jpg?v=1703121159"},{"product_id":"ht-010906-250-psi-ti-fuel-oil-wastegate-pressure-sensor","title":"250 PSI \"TI\" Fuel\/Oil\/Wastegate Pressure Sensor (HT-010906)","description":"\u003cp\u003e250 PSI \"TI\" Fuel\/Oil\/Wastegate Pressure Sensor: accurate data where the tune needs it. Direct compatibility with Haltech ECU inputs, with calibrations already in the software.\u003c\/p\u003e\n\u003ch2\u003eWhat You'll See\u003c\/h2\u003e\n\u003cp\u003eThe pressure that matters, live on the dash and in every log. Fuel pressure trending down under load flags a failing pump before it costs an engine. Oil pressure per corner of the track shows surge before a bearing sees it. Wastegate dome pressure confirms boost control is doing what the strategy says.\u003c\/p\u003e\n\u003ch2\u003eThe Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: HT-010906\u003c\/li\u003e\n\u003cli\u003eThread: 1\/8 NPT\u003c\/li\u003e\n\u003cli\u003eNotes: \"TI\" Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eMatching plug and pins, -4 AN adaptor.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eCheck the notes above before ordering; if anything is unclear, send us your setup details and we will confirm.\u003c\/p\u003e\n\u003cp\u003eTuned By Shawn is a Platinum Haltech Dealer with in-house wiring and remote tuning services. If this needs to integrate with a larger build plan, ask and we will spec the full parts list.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39405908361283,"sku":"HT-010906","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/HT-010906_00.jpg?v=1703121163"},{"product_id":"aem-50-1200-e85-fuel-pump","title":"AEM 50-1200 E85 Fuel Pump","description":"\u003cdiv class=\"content\"\u003e\n                    \u003cp\u003e\n                        \n                    \u003c\/p\u003e\n\t\t\t\t    \u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n                        \u003cp\u003eRADIUM DOES NOT OFFER A WARRANTY ON ANY FUEL PUMPS! FUEL PUMPS CAN BE RETURNED IN UNUSED CONDITION WITHIN 30 DAYS OF PURCHASE. SEE TERMS AND CONDITIONS FOR MORE INFORMATION.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Blog\/Post\/Radium-s-Ultimate-Fuel-Pump-Test-100\"\u003eCLICK HERE FOR RADIUM'S INDEPENDENT FLOW TEST\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eAEM’s 340lph E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels. Compatible with gasoline and all blends of ethanol\/methanol.\u003c\/p\u003e\n\u003cp\u003eThe AEM 340lph E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eRadium Engineering sells the latest version of this pump that has an electrical connector that is same as the Walbro GSS342 (255 lph) and the AEM 50-1000. Earlier versions (pre-April 2016) have a unique connector.\u003cbr\u003e\u003cbr\u003eThe 340lph E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter, internal fuel hose, clamps, end cap and rubber buffer sleeve. Every AEM 320lph E85-Compatible Fuel Pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline\u003c\/li\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003eIn tank design\u003c\/li\u003e\n\u003cli\u003eEach pump is tested to flow 340 lph @ 40 PSI\u003c\/li\u003e\n\u003cli\u003e39mm diameter fits most applications\u003c\/li\u003e\n\u003cli\u003eIncludes pre filter, hose, clamps, flying lead, end cap and rubber buffer sleeve\u003c\/li\u003e\n\u003c\/ul\u003e\n                    \u003c\/div\u003e\n\t\t\t\t    \u003cdiv class=\"customFieldsWrapper\"\u003e\n\t\t\t\t\t    \n\t\t\t\t    \u003c\/div\u003e\n                \u003c\/div\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":39518972575811,"sku":"AEM 50-1200","price":123.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/AEM_50-1200.jpg?v=1703122333"},{"product_id":"aem-50-1220-e85-fuel-pump","title":"AEM 50-1220 E85 Fuel Pump","description":"\u003cdiv class=\"content\"\u003e\n                    \u003cp\u003e\n                        \n                    \u003c\/p\u003e\n\t\t\t\t    \u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n                        \u003cp\u003eRADIUM DOES NOT OFFER A WARRANTY ON ANY FUEL PUMPS! FUEL PUMPS CAN BE RETURNED IN UNUSED CONDITION WITHIN 30 DAYS OF PURCHASE. SEE TERMS AND CONDITIONS FOR MORE INFORMATION.\u003cbr\u003e\u003cbr\u003eAEM’s 340lph E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline.\u003c\/p\u003e\n\u003cp\u003eThe AEM 340lph E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe 340lph E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter, internal fuel hose, clamps, end cap and rubber buffer sleeve. Every AEM 340lph E85-Compatible Fuel Pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline\u003c\/li\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003eIn tank design\u003c\/li\u003e\n\u003cli\u003eEach pump is tested to flow 340 lph @ 40 PSI\u003c\/li\u003e\n\u003cli\u003e39mm diameter fits most applications\u003c\/li\u003e\n\u003cli\u003eIncludes pre filter, hose, clamps, flying lead, end cap and rubber buffer sleeve\u003c\/li\u003e\n\u003c\/ul\u003e\n                    \u003c\/div\u003e\n\t\t\t\t    \u003cdiv class=\"customFieldsWrapper\"\u003e\n\t\t\t\t\t    \n\t\t\t\t    \u003c\/div\u003e\n                \u003c\/div\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":39518972674115,"sku":"AEM 50-1220","price":142.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/50-1220.jpg?v=1703122333"},{"product_id":"walbro-f90000274-e85-fuel-pump","title":"Walbro F90000274 E85 Fuel Pump","description":"\u003cdiv class=\"content\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n\u003cp\u003eRADIUM DOES NOT OFFER A WARRANTY ON ANY FUEL PUMPS! FUEL PUMPS CAN BE RETURNED IN UNUSED CONDITION WITHIN 30 DAYS OF PURCHASE. SEE TERMS AND CONDITIONS FOR MORE INFORMATION.\u003cbr\u003e\u003cbr\u003eDual channel turbine design for maximum efficiency under high pressure and high temperature applications. Made in USA by TI Automotive (parent company of Walbro). All pumping components have been validated to OEM specifications for approved use in E85\/flex fuel applications. 100% Authentic \u0026amp; Genuine Walbro\/TI Automotive E85 Racing in-tank high pressure fuel pump.\u003c\/p\u003e\n\u003cp\u003eThe innovative design of the DCSS 39\/50 features a single impeller with two parallel rows of turbine blades. Designed for E85 or gasoline applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that’s 20 percent higher than conventional pumps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRADIUM TESTED SPECIFICATIONS\u003c\/strong\u003e \u003cbr\u003eFlow Rate: 422 LPH @ 43.5 PSI (3 BAR)\u003cbr\u003eCurrent: 15.6 AMPS @ 13.5 V\u003c\/p\u003e\n\u003cp\u003eOutlet diameter: 10mm (3\/8\")\u003cbr\u003eDiameter (upper body) 39mm \u003cbr\u003eDiameter (lower body) 50mm\u003cbr\u003e\u003cbr\u003eNOTE: THE WALBRO F90000274 AND F90000267 FUEL PUMP FLOW RATES AND PHYSICAL DIMENSIONS ARE IDENTICAL. THE WALBRO F90000274 SIMPLY HAS A DIFFERENT INTERNAL RELIEF VALVE PERMITTING HIGHER FUEL PRESSURES. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis product does NOT include an \"install kit\" (filter sock, wiring pigtail, hose, clamps, etc.). However, this\u003cstrong\u003e pump is compatible with \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Pump-Inlet-Filter-Sock-P448.aspx\"\u003e14-0143 Fuel Pump Filter Sock\u003c\/a\u003e. \u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"customFieldsWrapper\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":39518972903491,"sku":"WALB F90000274","price":104.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/Walbro_E85.jpg?v=1703122333"},{"product_id":"walbro-gss342-255lph-fuel-pump","title":"Walbro GSS342 255LPH Fuel Pump","description":"\u003cdiv class=\"content\"\u003e\n                    \u003cp\u003e\n                        \n                    \u003c\/p\u003e\n\t\t\t\t    \u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n                        \u003cp\u003e\u003cstrong\u003eRADIUM DOES NOT OFFER A WARRANTY ON ANY FUEL PUMPS!\u003c\/strong\u003e FUEL PUMPS CAN BE RETURNED IN UNUSED CONDITION WITHIN 30 DAYS OF PURCHASE. SEE TERMS AND CONDITIONS FOR MORE INFORMATION.\u003cbr\u003e\u003cbr\u003eThe classic \"Walbro 255\" EFI fuel pump is a great options for any vehicle under 550 BHP* (gasoline) and has proven to be reliable over many years on the market. This gearotor pump is reliable and draws minimal current to operate. \u003cbr\u003eTi Automotive (parent company of Walbro) does not officially advertise compatibility with ethanol fuels, so research before using with alternative fuels.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: x-small;\"\u003e\u003cem\u003e*Approximation. Individual results may vary.\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.radiumauto.com\/Blog\/Post\/Radium-s-Ultimate-Fuel-Pump-Test-100\"\u003eCLICK HERE for Radium's independent flow test.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis product does NOT include an \"install kit\" (filter sock, wiring pigtail, hose, clamps, etc.). However, t\u003cstrong\u003ehis pump is compatible with \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Pump-Inlet-Filter-Sock-P448.aspx\"\u003e14-0143 Fuel Pump Filter Sock\u003c\/a\u003e. \u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n                    \u003c\/div\u003e\n\t\t\t\t    \u003cdiv class=\"customFieldsWrapper\"\u003e\n\t\t\t\t\t    \n\t\t\t\t    \u003c\/div\u003e\n                \u003c\/div\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":39518973231171,"sku":"WALB GSS342","price":75.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/Walbro_GSS342_255LPH.jpg?v=1703122335"},{"product_id":"walbro-f90000295-e85-fuel-pump","title":"Walbro F90000295 E85 Fuel Pump","description":"\u003cdiv class=\"content\"\u003e\n                    \u003cp\u003e\n                        \n                    \u003c\/p\u003e\n\t\t\t\t    \u003cdiv class=\"descriptionWrapper\" itemprop=\"description\"\u003e\n                        \u003cp\u003eRADIUM DOES NOT OFFER A WARRANTY ON ANY FUEL PUMPS! FUEL PUMPS CAN BE RETURNED IN UNUSED CONDITION WITHIN 30 DAYS OF PURCHASE. SEE TERMS AND CONDITIONS FOR MORE INFORMATION.\u003cbr\u003e\u003cbr\u003eDual channel turbine design for maximum efficiency under high pressure and high temperature applications. Made in USA by TI Automotive (parent company of Walbro). All pumping components have been validated to OEM specifications for approved use in E85\/flex fuel applications. 100% Authentic \u0026amp; Genuine Walbro\/TI Automotive E85 Racing in-tank high pressure fuel pump.\u003c\/p\u003e\n\u003cp\u003eThe innovative design of the DCSS 39\/50 features a single impeller with two parallel rows of turbine blades. Designed for E85 or gasoline applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that’s 30 percent higher than conventional pumps. \u003cbr\u003e\u003cbr\u003eOutlet Diameter: 10mm (3\/8\")\u003cbr\u003eDiameter (upper body) 39mm \u003cbr\u003eDiameter (lower body) 50mm\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWalbro F90000295\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eThis is the same fuel pump as the Walbro F90000285 \"Hellcat\" except it does not have a check valve integrated into the outlet. This permits more flow and less current draw making it perfect for a fuel surge tank \"lift\" pump. If a high flow check valve is required, \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Pump-Outlet-Adapter-Check-Valve-P1709.aspx\"\u003e20-0598\u003c\/a\u003e can be used. \u003cbr\u003e\u003cbr\u003eThe other minor difference is the Walbro F90000295 wiring harness is 10mm longer and is identified with red and white wires (instead of red\/black).\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNOTES: \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003e1. Physical dimensions of Walbro F90000295\/285\/274\/267 pumps are identical.\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e2. Does NOT include an \"install kit\" (filter sock, wiring pigtail, hose, clamps, etc.) \u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e3. This fuel pump is compatible with \u003ca href=\"http:\/\/www.radiumauto.com\/Fuel-Pump-Inlet-Filter-Sock-P448.aspx\"\u003e14-0143 Fuel Pump Filter Sock\u003c\/a\u003e. \u003c\/strong\u003e\u003c\/p\u003e\n\n                    \u003c\/div\u003e\n\t\t\t\t    \u003cdiv class=\"customFieldsWrapper\"\u003e\n\t\t\t\t\t    \n\t\t\t\t    \u003c\/div\u003e\n                \u003c\/div\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":39518973296707,"sku":"WALB F90000295","price":142.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/products\/Walbro_F90000295.jpg?v=1703122335"},{"product_id":"option-set-400540-select-10","title":"DO YOU NEED A FLEX-FUEL SENSOR","description":"","brand":"Tuned By Shawn","offers":[{"title":"Yes - Haltech Flex Fuel Sensor","offer_id":40752989995075,"sku":null,"price":244.0,"currency_code":"USD","in_stock":true}]},{"product_id":"fuel-injector-adapter-10-5mm-1-2-to-full-length-ht-080000","title":"Fuel Injector Adapter 10.5mm 1\/2 to Full Length (HT-080000)","description":"\u003cp\u003e\u003cstrong\u003eFlowmatched fueling you can actually trust at the injector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eFuel Injector Adapter 10.5mm 1\/2 to Full Length\u003c\/strong\u003e is flow-tested and color-coded so you know exactly what you are installing. Reliable atomization and consistent delivery give your tune a stable base to build on.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlow-tested for consistent, repeatable delivery\u003c\/li\u003e\n\u003cli\u003eColor-coded for easy identification\u003c\/li\u003e\n\u003cli\u003eBacked by Haltech limited warranty\u003c\/li\u003e\n\u003cli\u003eFor competition and off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details\u003c\/h4\u003e\n\u003cp\u003ePart number HT-080000. Manufactured to Haltech specification, so it drops into your system without surprises. Always confirm fitment and compatibility for your specific application before purchase.\u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eSee the product title and Haltech documentation for exact application coverage. Part number HT-080000.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":43452881141827,"sku":"HT-080000","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/HT-080000_00.jpg?v=1782317109"},{"product_id":"fuel-injector-adapter-10-5mm-nissan-rb26dett-gtr-ht-080001","title":"Fuel Injector Adapter 10.5mm Nissan RB26DETT GTR (HT-080001)","description":"\u003cp\u003e\u003cstrong\u003eFlowmatched fueling you can actually trust at the injector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eFuel Injector Adapter 10.5mm Nissan RB26DETT GTR\u003c\/strong\u003e is flow-tested and color-coded so you know exactly what you are installing. Reliable atomization and consistent delivery give your tune a stable base to build on.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlow-tested for consistent, repeatable delivery\u003c\/li\u003e\n\u003cli\u003eColor-coded for easy identification\u003c\/li\u003e\n\u003cli\u003eBacked by Haltech limited warranty\u003c\/li\u003e\n\u003cli\u003eFor competition and off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details\u003c\/h4\u003e\n\u003cp\u003ePart number HT-080001. Manufactured to Haltech specification, so it drops into your system without surprises. Always confirm fitment and compatibility for your specific application before purchase.\u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eSee the product title and Haltech documentation for exact application coverage. Part number HT-080001.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":43452881174595,"sku":"HT-080001","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/HT-080001_00.jpg?v=1782317110"},{"product_id":"fuel-injector-adapter-11mm-1-2-to-full-length-ht-080002","title":"Fuel Injector Adapter 11mm 1\/2 to Full Length (HT-080002)","description":"\u003cp\u003e\u003cstrong\u003eFlowmatched fueling you can actually trust at the injector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eFuel Injector Adapter 11mm 1\/2 to Full Length\u003c\/strong\u003e is flow-tested and color-coded so you know exactly what you are installing. Reliable atomization and consistent delivery give your tune a stable base to build on.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlow-tested for consistent, repeatable delivery\u003c\/li\u003e\n\u003cli\u003eColor-coded for easy identification\u003c\/li\u003e\n\u003cli\u003eBacked by Haltech limited warranty\u003c\/li\u003e\n\u003cli\u003eFor competition and off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details\u003c\/h4\u003e\n\u003cp\u003ePart number HT-080002. Manufactured to Haltech specification, so it drops into your system without surprises. Always confirm fitment and compatibility for your specific application before purchase.\u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eSee the product title and Haltech documentation for exact application coverage. Part number HT-080002.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":43452881207363,"sku":"HT-080002","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/HT-080002_00.jpg?v=1782317111"},{"product_id":"fuel-injector-adapter-11mm-3-4-to-full-length-ht-080003","title":"Fuel Injector Adapter 11mm 3\/4 to Full Length (HT-080003)","description":"\u003cp\u003e\u003cstrong\u003eFlowmatched fueling you can actually trust at the injector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eFuel Injector Adapter 11mm 3\/4 to Full Length\u003c\/strong\u003e is flow-tested and color-coded so you know exactly what you are installing. Reliable atomization and consistent delivery give your tune a stable base to build on.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlow-tested for consistent, repeatable delivery\u003c\/li\u003e\n\u003cli\u003eColor-coded for easy identification\u003c\/li\u003e\n\u003cli\u003eBacked by Haltech limited warranty\u003c\/li\u003e\n\u003cli\u003eFor competition and off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details\u003c\/h4\u003e\n\u003cp\u003ePart number HT-080003. Manufactured to Haltech specification, so it drops into your system without surprises. Always confirm fitment and compatibility for your specific application before purchase.\u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eSee the product title and Haltech documentation for exact application coverage. Part number HT-080003.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":43452881240131,"sku":"HT-080003","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/HT-080003_00.jpg?v=1782317112"},{"product_id":"fuel-injector-adapter-14mm-3-4-to-full-length-ht-080004","title":"Fuel Injector Adapter 14mm 3\/4 to Full Length (HT-080004)","description":"\u003cp\u003e\u003cstrong\u003eFlowmatched fueling you can actually trust at the injector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eFuel Injector Adapter 14mm 3\/4 to Full Length\u003c\/strong\u003e is flow-tested and color-coded so you know exactly what you are installing. Reliable atomization and consistent delivery give your tune a stable base to build on.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlow-tested for consistent, repeatable delivery\u003c\/li\u003e\n\u003cli\u003eColor-coded for easy identification\u003c\/li\u003e\n\u003cli\u003eBacked by Haltech limited warranty\u003c\/li\u003e\n\u003cli\u003eFor competition and off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details\u003c\/h4\u003e\n\u003cp\u003ePart number HT-080004. Manufactured to Haltech specification, so it drops into your system without surprises. Always confirm fitment and compatibility for your specific application before purchase.\u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eSee the product title and Haltech documentation for exact application coverage. Part number HT-080004.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":43452881272899,"sku":"HT-080004","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/HT-080004_00.jpg?v=1782317112"},{"product_id":"fuel-injector-adapter-14mm-1-2-to-3-4-length-ht-080005","title":"Fuel Injector Adapter 14mm 1\/2 to 3\/4 Length (HT-080005)","description":"\u003cp\u003e\u003cstrong\u003eFlowmatched fueling you can actually trust at the injector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eFuel Injector Adapter 14mm 1\/2 to 3\/4 Length\u003c\/strong\u003e is flow-tested and color-coded so you know exactly what you are installing. Reliable atomization and consistent delivery give your tune a stable base to build on.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlow-tested for consistent, repeatable delivery\u003c\/li\u003e\n\u003cli\u003eColor-coded for easy identification\u003c\/li\u003e\n\u003cli\u003eBacked by Haltech limited warranty\u003c\/li\u003e\n\u003cli\u003eFor competition and off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details\u003c\/h4\u003e\n\u003cp\u003ePart number HT-080005. Manufactured to Haltech specification, so it drops into your system without surprises. Always confirm fitment and compatibility for your specific application before purchase.\u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eSee the product title and Haltech documentation for exact application coverage. Part number HT-080005.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":43452881305667,"sku":"HT-080005","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/HT-080005_00.jpg?v=1782317113"},{"product_id":"fuel-injector-adapter-14mm-1-2-to-full-length-ht-080006","title":"Fuel Injector Adapter 14mm 1\/2 to Full Length (HT-080006)","description":"\u003cp\u003e\u003cstrong\u003eFlowmatched fueling you can actually trust at the injector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eFuel Injector Adapter 14mm 1\/2 to Full Length\u003c\/strong\u003e is flow-tested and color-coded so you know exactly what you are installing. Reliable atomization and consistent delivery give your tune a stable base to build on.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlow-tested for consistent, repeatable delivery\u003c\/li\u003e\n\u003cli\u003eColor-coded for easy identification\u003c\/li\u003e\n\u003cli\u003eBacked by Haltech limited warranty\u003c\/li\u003e\n\u003cli\u003eFor competition and off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details\u003c\/h4\u003e\n\u003cp\u003ePart number HT-080006. Manufactured to Haltech specification, so it drops into your system without surprises. Always confirm fitment and compatibility for your specific application before purchase.\u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eSee the product title and Haltech documentation for exact application coverage. Part number HT-080006.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":43452881338435,"sku":"HT-080006","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/HT-080006_00.jpg?v=1782317114"},{"product_id":"fuel-injector-adapter-14mm-base-ht-080007","title":"Fuel Injector Adapter 14mm Base (HT-080007)","description":"\u003cp\u003e\u003cstrong\u003eFlowmatched fueling you can actually trust at the injector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eFuel Injector Adapter 14mm Base\u003c\/strong\u003e is flow-tested and color-coded so you know exactly what you are installing. Reliable atomization and consistent delivery give your tune a stable base to build on.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlow-tested for consistent, repeatable delivery\u003c\/li\u003e\n\u003cli\u003eColor-coded for easy identification\u003c\/li\u003e\n\u003cli\u003eBacked by Haltech limited warranty\u003c\/li\u003e\n\u003cli\u003eFor competition and off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details\u003c\/h4\u003e\n\u003cp\u003ePart number HT-080007. Manufactured to Haltech specification, so it drops into your system without surprises. Always confirm fitment and compatibility for your specific application before purchase.\u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eSee the product title and Haltech documentation for exact application coverage. Part number HT-080007.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":43452881436739,"sku":"HT-080007","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/HT-080007_00.jpg?v=1782317115"},{"product_id":"fuel-injector-adapter-nissan-base-ht-080008","title":"Fuel Injector Adapter Nissan Base (HT-080008)","description":"\u003cp\u003e\u003cstrong\u003eFlowmatched fueling you can actually trust at the injector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eFuel Injector Adapter Nissan Base\u003c\/strong\u003e is flow-tested and color-coded so you know exactly what you are installing. Reliable atomization and consistent delivery give your tune a stable base to build on.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlow-tested for consistent, repeatable delivery\u003c\/li\u003e\n\u003cli\u003eColor-coded for easy identification\u003c\/li\u003e\n\u003cli\u003eBacked by Haltech limited warranty\u003c\/li\u003e\n\u003cli\u003eFor competition and off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details\u003c\/h4\u003e\n\u003cp\u003ePart number HT-080008. Manufactured to Haltech specification, so it drops into your system without surprises. Always confirm fitment and compatibility for your specific application before purchase.\u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eSee the product title and Haltech documentation for exact application coverage. Part number HT-080008.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":43452881469507,"sku":"HT-080008","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/HT-080008_00.jpg?v=1782317116"},{"product_id":"bosch-injector-980cc-0280158040-flowmatched-blue-ht-080100blu","title":"Bosch Injector 980cc (0280158040) Flowmatched BLUE (HT-080100BLU)","description":"\u003cp\u003e\u003cstrong\u003eFlowmatched fueling you can actually trust at the injector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBosch Injector 980cc (0280158040) Flowmatched BLUE\u003c\/strong\u003e is flow-tested and color-coded so you know exactly what you are installing. Reliable atomization and consistent delivery give your tune a stable base to build on.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlow-tested for consistent, repeatable delivery\u003c\/li\u003e\n\u003cli\u003eColor-coded for easy identification\u003c\/li\u003e\n\u003cli\u003eBacked by Haltech limited warranty\u003c\/li\u003e\n\u003cli\u003eFor competition and off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details\u003c\/h4\u003e\n\u003cp\u003ePart number HT-080100BLU. Manufactured to Haltech specification, so it drops into your system without surprises. Always confirm fitment and compatibility for your specific application before purchase.\u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eSee the product title and Haltech documentation for exact application coverage. Part number HT-080100BLU.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":43452881535043,"sku":"HT-080100BLU","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/HT-080100BLU_00.jpg?v=1782317116"},{"product_id":"bosch-injector-980cc-0280158040-flowmatched-red-ht-080100red","title":"Bosch Injector 980cc (0280158040) Flowmatched RED (HT-080100RED)","description":"\u003cp\u003e\u003cstrong\u003eFlowmatched fueling you can actually trust at the injector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBosch Injector 980cc (0280158040) Flowmatched RED\u003c\/strong\u003e is flow-tested and color-coded so you know exactly what you are installing. Reliable atomization and consistent delivery give your tune a stable base to build on.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlow-tested for consistent, repeatable delivery\u003c\/li\u003e\n\u003cli\u003eColor-coded for easy identification\u003c\/li\u003e\n\u003cli\u003eBacked by Haltech limited warranty\u003c\/li\u003e\n\u003cli\u003eFor competition and off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details\u003c\/h4\u003e\n\u003cp\u003ePart number HT-080100RED. Manufactured to Haltech specification, so it drops into your system without surprises. Always confirm fitment and compatibility for your specific application before purchase.\u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eSee the product title and Haltech documentation for exact application coverage. Part number HT-080100RED.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":43452881567811,"sku":"HT-080100RED","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/HT-080100RED_00.jpg?v=1782317117"},{"product_id":"bosch-injector-980cc-0280158040-flowmatched-yellow-ht-080100yel","title":"Bosch Injector 980cc (0280158040) Flowmatched Yellow (HT-080100YEL)","description":"\u003cp\u003e\u003cstrong\u003eFlowmatched fueling you can actually trust at the injector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBosch Injector 980cc (0280158040) Flowmatched Yellow\u003c\/strong\u003e is flow-tested and color-coded so you know exactly what you are installing. Reliable atomization and consistent delivery give your tune a stable base to build on.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlow-tested for consistent, repeatable delivery\u003c\/li\u003e\n\u003cli\u003eColor-coded for easy identification\u003c\/li\u003e\n\u003cli\u003eBacked by Haltech limited warranty\u003c\/li\u003e\n\u003cli\u003eFor competition and off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details\u003c\/h4\u003e\n\u003cp\u003ePart number HT-080100YEL. Manufactured to Haltech specification, so it drops into your system without surprises. Always confirm fitment and compatibility for your specific application before purchase.\u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eSee the product title and Haltech documentation for exact application coverage. Part number HT-080100YEL.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":43452881600579,"sku":"HT-080100YEL","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/HT-080100YEL_00.jpg?v=1782317118"},{"product_id":"bosch-injector-1462cc-0280158333-flowmatched-blue-ht-080101blu","title":"Bosch Injector 1462cc (0280158333)-Flowmatched Blue (HT-080101BLU)","description":"\u003cp\u003e\u003cstrong\u003eFlowmatched fueling you can actually trust at the injector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBosch Injector 1462cc (0280158333)-Flowmatched Blue\u003c\/strong\u003e is flow-tested and color-coded so you know exactly what you are installing. Reliable atomization and consistent delivery give your tune a stable base to build on.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlow-tested for consistent, repeatable delivery\u003c\/li\u003e\n\u003cli\u003eColor-coded for easy identification\u003c\/li\u003e\n\u003cli\u003eBacked by Haltech limited warranty\u003c\/li\u003e\n\u003cli\u003eFor competition and off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details\u003c\/h4\u003e\n\u003cp\u003ePart number HT-080101BLU. Manufactured to Haltech specification, so it drops into your system without surprises. Always confirm fitment and compatibility for your specific application before purchase.\u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eSee the product title and Haltech documentation for exact application coverage. Part number HT-080101BLU.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":43452881633347,"sku":"HT-080101BLU","price":177.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/HT-080101BLU_00.jpg?v=1782317119"},{"product_id":"bosch-injector-1462cc-0280158333-flowmatched-red-ht-080101red","title":"Bosch Injector 1462cc (0280158333) Flowmatched Red (HT-080101RED)","description":"\u003cp\u003e\u003cstrong\u003eFlowmatched fueling you can actually trust at the injector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBosch Injector 1462cc (0280158333) Flowmatched Red\u003c\/strong\u003e is flow-tested and color-coded so you know exactly what you are installing. Reliable atomization and consistent delivery give your tune a stable base to build on.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlow-tested for consistent, repeatable delivery\u003c\/li\u003e\n\u003cli\u003eColor-coded for easy identification\u003c\/li\u003e\n\u003cli\u003eBacked by Haltech limited warranty\u003c\/li\u003e\n\u003cli\u003eFor competition and off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details\u003c\/h4\u003e\n\u003cp\u003ePart number HT-080101RED. Manufactured to Haltech specification, so it drops into your system without surprises. Always confirm fitment and compatibility for your specific application before purchase.\u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eSee the product title and Haltech documentation for exact application coverage. Part number HT-080101RED.\u003c\/p\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":43452881666115,"sku":"HT-080101RED","price":177.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/7754\/5539\/files\/HT-080101RED_00.jpg?v=1782317120"}],"url":"https:\/\/www.tunedbyshawn.com\/collections\/fuel-system.oembed?page=19","provider":"Tuned by Shawn","version":"1.0","type":"link"}